Immobilization of novel the semicarbazone derivatives of calix[4]arene onto magnetite nanoparticles for removal of Cr(VI) ion

A series of novel the semicarbazone derivatives of calix[4]arene have been synthesized and then immobilized onto amino functionalized magnetic nanoparticles. Magnetic Fe₃O₄ nanoparticles were prepared by the chemical co-precipitation of Fe(III) and Fe(II) ions and the nanoparticles were modified directly by 3-aminopropyltriethoxy silane (APTES) to introduce reactive amine groups onto the particles’ surface. The characterization of the prepared compounds was made by FT-IR, elemental analysis, TGA/DTG and NMR techniques. The sorption properties of the new calix[4]arene based magnetic sorbents toward Cr(VI) ion were also studied. The results showed that the prepared magnetic nanoparticles were effective sorbents for the removal of Cr(VI) ion. Also, Langmuir and Freundlich isotherm models were applied for Cr(VI) ion sorption by using MN-C2 and it was found that the experimental data confirmed to Langmiur isotherm model.     

Bis(2‐pyridyl­methanol)­bis­(saccharinato)­zinc(II) and ‐cadmium(II) at 120 K: three‐dimensional structures containing both N‐and O‐coordinated ambi­dentate saccharinate ligands

The title complexes [M(sac)₂(mpy)₂] [sac is saccharinate (C₇H₄NO₃S) and mpy is 2‐pyridyl­methanol (C₆H₇NO)], with M = Zn^II and Cd^II, are isostructural and consist of neutral mol­ecules. The Zn^II or Cd^II cations are octahedrally coordinated by the two neutral mpy and two anionic sac ligands. The mpy ligand acts as a bidentate donor through the amine N and hydroxyl O atoms. The sac ligands exhibit an ambidentate coordination behaviour; one is N‐coordinated and the other is O‐coordinated within the same coordination octahedron. The crystal packing is determined by C—H?O‐type hydrogen bonding, as well as by weak py–py and sac–sac aromatic π–π‐stacking interactions.     

Synthesis,optical, and structural properties of bisphenol-bridged aromatic cyclic phosphazenes

Phenoxy- and naphthoxy-substituted bisphenol-bridged cyclic phosphazenes were synthesized in 2 steps and their thermal, photophysical, and electrochemical properties were investigated. The structures of the cyclic phosphazene compounds were determined by ESI-MS mass spectrometry and ¹ H, ¹³ C, and ³¹ P NMR spectroscopies. The photophysical studies of phenoxy- and naphthoxy-substituted bridged cyclophosphazenes were investigated by means of absorption and fluorescence spectroscopies in different solvents. Thermal and electrochemical properties of the target compounds were also studied. Furthermore, the excimer emissions through intramolecular interactions in solution and in solid state were investigated by fluorescence spectroscopy and the theoretical calculations were performed in detail using DFT.     

Synthesis of new cyclotriphosphazene derivatives bearing Schiff bases and their thermal and absorbance properties

In this study, a series of cyclotriphosphazene derivatives containing a Schiff base (3a–3d) were synthesized by the reactions of hexachlorocyclotriphosphazene (1) with bis-aryl Schiff bases ( 2a – 2d ) having different terminal groups (H, F, Cl, and Br). The products ( 3a – 3d ) were characterized by elemental and mass analyses, FT-IR, and ¹ H, ¹³ C, and ³¹ P NMR spectroscopies. Furthermore, the structure of compound 3a was also determined by X-ray crystallography. The thermal behaviors and the spectral properties of the new cyclotriphosphazene compounds ( 3a – 3d ) were investigated and the results were compared in the series.     

Thermo‐ and pH‐induced phase transitions and network parameters of poly(N‐isopropylacrylamide‐ co‐2‐acrylamido‐2‐methyl‐propanosulfonic acid) hydrogels

Dual temperature‐ and pH‐sensitive hydrogels composed of N‐isopropylacrylamide (NIPAM) and 2‐acrylamido‐2‐methyl‐propanosulfonic acid (AMPS) were prepared by free‐radical crosslinking copolymerization in aqueous solution at 22 °C. The mole percent of AMPS in the comonomer feed was varied between 0.0 and 7.5, while the crosslinker ratio was fixed at 5.0/100. The effect of AMPS content on thermo‐ and pH‐ induced phase transitions as well as equilibrium swelling/deswelling, interior morphology and network structure was investigated. The volume phase transition temperature (VPT‐T) was determined by both swelling/deswelling measurements and differential scanning calorimetry (DSC) technique. In addition, the volume phase transition pH (VPT‐pH) was detected from the derivative of the curves of the swelling ratio (dQ_v/dpH) versus pH. The polymer‐solvent interaction parameter (χ) and the average molecular mass between crosslinks ( ) of hydrogels were calculated from swelling ratios in buffer solutions at various pHs. The enthalpy (ΔH) and entropy (ΔS) changes appearing in the χ parameter of hydrogels were also determined by using the modified Flory–Rehner equation. The negative values for ΔH and ΔS indicated that the hydrogels had a negative temperature‐sensitive property in water, that is, swelling at a lower temperature and shrinking at a higher temperature. It was observed that the experimental swelling data of hydrogels at different temperature agreed with the modified Flory‐Rehner approach based on the affine network model. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1713–1724, 2008     

Nafion-graphene composite film modified glassy carbon electrode for voltammetric determination of p-aminophenol

A Nafion-graphene (Nafion-GR) nanocomposite film modified glassy carbon electrode was fabricated by a simple drop-casting method, and used in the electrochemical detection of p-aminophenol (4-AP). Owing to the large surface area, good conductivity of GR and good affinity of Nafion, the sensor exhibited excellent electrocatalytic activity for the oxidation of 4-AP. The electrochemical behaviors of 4-AP on Nafion/GR film modified glassy carbon electrodes were investigated by cyclic voltammetry and differential pulse voltammetry. A calibration curve is constructed in the same matrix, urine, as the unknown samples to be analyzed. The Nafion-GR film modified electrode was linearly dependent on the 4-AP concentration and the linear analytical curve was obtained in the ranges of 0.5–200 μM with differential pulse voltammetry (DPV) and the detection limit was 0.051 μM. The Nafion-graphene nanocomposite modified electrode exhibited good reusability than pure graphene modified GCE. This procedure can be used for the determination of p-aminophenol in the presence of its degradation products and paracetamol. Finally, the proposed method was successfully used to determine p-aminophenol in local tap water samples in urine samples and pharmaceutical preparations.     

Brønsted acidic magnetic nano-Fe3O4-adorned calix[n]arene sulfonic acids: synthesis and application in the nucleophilic substitution of alcohols

Three magnetically recoverable Brønsted acidic calix[n]arene derivatives were successfully constructed by immobilizing calix[n]arene sulfonic acids onto silica-coated magnetic nanoparticles, a process, which allows calix[n]arene derivatives to acquire magnetic properties. All of the magnetically recoverable Brønsted acidic calix[n]arenes efficiently catalyze the coupling of electron-rich arenes with some alcohols in water. After separation and recovery from the reaction mixture by a simple magnet, these Brønsted acidic calix[n]arenes can be recycled many times without losing their catalytic activity.     

A triphenylamine based multi-analyte chemosensor for Hg and Cu ions in MeCN/H2O

A novel triphenylamine based oxidative chemosensor TOC was synthesized. The chromogenic and fluorogenic behaviors of TOC towards Hg²⁺ and Cu²⁺ ions in a binary mixture of MeCN/H₂O (9/1) were dramatically different. TOC displays colorimetric ‘naked eye’ recognition of Hg²⁺ and fluorogenic ‘turn on’ response towards Cu²⁺ via a unique cyclization reaction using two different detection modes. Moreover, TOCAZOL obtained from the oxidative cyclization reaction of TOC with Cu(ClO₄)₂ can be used as a selective fluorescent sensor toward Hg²⁺ ion.     

Facile Method for 1,3‐Dipolar Cycloaddition Reaction of Azomethine Ylides: Highly Stereoselective Synthesis of Substituted Pyrrolidine Derivatives

The substituted pyrolidine derivatives with high stereoselectivity were obtained through cycloaddition reaction in the presence of a Lewis acid namely diethylzinc by solvent‐free grinding method.     

On-line preconcentration and determination of Au(III) in various environmental/industrial samples by flame atomic absorption spectrometry

A rapid and simple on-line method is described for the determination of Au(III) in various samples. The method is based on the sorption of gold(III) on Lewatit MonoPlus TP207 chelating resin including the iminodiacetate group, which is used as sorbent material and packed in a minicolumn. The chemical variables such as the pH of the sample solution, eluent type, interfering ions and concentrations of reagents, and instrumental variables such as sample loading volume, reagents flow rates, and tubing length, which affect the efficiency of the method were studied and optimised. Au(III) was sorbed on the chelating resin, from which it could be eluted with 3 mol L^?1 HCl, and then introduced directly to the nebuliser-burner system of FAAS. The limit of detection of the method was 0.2 µg L^?1 while the relative standard deviation was <4.0% for 20 µg L^?1 Au(III) concentration. The preconcentration factor was found to be 106 while the optimised sample volume was 15.3 mL. The accuracy of the method was verified by analysing the certified reference material. The developed method was applied successfully for the determination of gold in different samples with satisfactory results.