Two nickel complexes stabilized by nitrate counter‐ions

Two new nickel nitrates, di­aqua­bis(3,4,7,8‐tetra­methyl‐1,10‐phenanthroline‐κ²N,N′)­nickel(II) dinitrate methanol solvate, [Ni(C₁₆H₁₆N₂)₂(H₂O)₂](NO₃)₂·CH₄O, (I), and tri­aqua­[2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine‐κ³N¹,N²,N⁶]nickel(II) di­ni­trate trihydrate, [Ni(C₁₈H₁₂N₆)(H₂O)₃](NO₃)₂·3H₂O, (II), are reported. In both structures, the cation is octahedrally coordinated, to two bidentate 3,4,7,8‐tetra­methyl‐1,10‐phenanthroline (tmp) and two water mol­ecules in (I), and to one tridentate 2,4,6‐tris(2‐pyridyl)‐1,3,5‐triazine (tpt) and three water mol­ecules in (II). Both structures are stabilized by extensive hydrogen‐bonding interactions.     

Biotransformation of 7-oxo-ent-kaur-16-ene derivatives by Gibberella fujikuroi

The microbiological transformation of 7-oxo-ent-kaur-16-ene by the fungus Gibberella fujikuroi gave fujenoic acid as the main compound, whilst the incubation of 18-hydroxy-7-oxo-ent-kaur-16-ene and 3α,18-dihydroxy-7-oxo-ent-kaur-16-ene afforded the corresponding 6β-hydroxy-derivatives. These facts indicate that the formation of fujenoic acid in this biotransformation should occur via a 7-oxo-6β-hydroxy derivative. In the three biotransformations, an 11β-hydroxylation was also produced, in low yield, indicating that a 7-oxo-group also directs hydroxylation at C-11.     

Excess enthalpies of some aromatic aldehydes in n-hexane, n-heptane and benzene

Calorimetric measurements of molar excess enthalpies, H^E, at 298.15 K, of mixtures containing aromatic aldehydes of general formula C₆H₅(CH₂)_mCHO (with m = 0, 1 and 2) + n-hexane, n-heptane or benzene are reported, together with the values of H^E at equimolar composition compared with the corresponding values of H^E for the aromatic ketones in the same solvents. The experimental results clearly indicate that the intermolecular interactions between the carbonyl groups (CHO) are influenced by the intramolecular interactions between the carbonyl and phenyl groups, particularly for the mixtures containing benzaldehyde.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.     

The partial hydrogenation of benzene to cyclohexene by nanoscale ruthenium catalysts in imidazolium ionic liquids

The controlled decomposition of an Ru(0) organometallic precursor dispersed in 1-n-butyl-3-methylimidazolium hexafluorophosphate (BMI.PF(6)), tetrafluoroborate (BMI.BF(4)) or trifluoromethane sulfonate (BMI.CF(3)SO(3)) ionic liquids with H(2) represents a simple and efficient method for the generation of Ru(0) nanoparticles. TEM analysis of these nanoparticles shows the formation of superstructures with diameters of approximately 57 nm that contain dispersed Ru(0) nanoparticles with diameters of 2.6+/-0.4 nm. These nanoparticles dispersed in the ionic liquids are efficient multiphase catalysts for the hydrogenation of alkenes and benzene under mild reaction conditions (4 atm, 75 degrees C). The ternary diagram (benzene/cyclohexene/BMI.PF(6)) indicated a maximum of 1 % cyclohexene concentration in BMI.PF(6), which is attained with 4 % benzene in the ionic phase. This solubility difference in the ionic liquid can be used for the extraction of cyclohexene during benzene hydrogenation by Ru catalysts suspended in BMI.PF(6). Selectivities of up to 39 % in cyclohexene can be attained at very low benzene conversion. Although the maximum yield of 2 % in cyclohexene is too low for technical applications, it represents a rare example of partial hydrogenation of benzene by soluble transition-metal nanoparticles.     

Theoretical modeling of enzyme catalytic power: analysis of "cratic" and electrostatic factors in catechol O-methyltransferase

A comparative theoretical study of a bimolecular reaction in aqueous solution and catalyzed by the enzyme catechol O-methyltransferase (COMT) has been carried out by a combination of two hybrid QM/MM techniques: statistical simulation methods and internal energy minimizations. In contrast to previous studies by other workers, we have located and characterized transition structures for the reaction in the enzyme active site, in water and in a vacuum, and our potential of mean force calculations are based upon reaction coordinates obtained from features of the potential energy surfaces in the condensed media, not from the gas phase. The AM1/CHARMM calculated free energy of activation for the reaction of S-adenosyl methionine (SAM) with catecholate catalyzed by COMT is 15 kcal mol(-1) lower the AM1/TIP3P free-energy barrier for the reaction of the trimethylsulfonium cation with the catecholate anion in water at 300 K, in agreement with previous estimates. The thermodynamically preferred form of the reactants in the uncatalyzed model reaction in water is a solvent-separated ion pair (SSIP). Conversion of the SSIP into a contact ion pair, with a structure resembling that of the Michaelis complex (MC) for the reaction in the COMT active site, is unfavorable by 7 kcal mol(-1), largely due to reorganization of the solvent. We have considered alternative ways to estimate the so-called "cratic" free energy for bringing the reactant species together in the correct orientation for reaction but conclude that direct evaluation of the free energy of association by means of molecular dynamics simulation with a simple standard-state correction is probably the best approach. The latter correction allows for the fact that the size of the unit cell employed with the periodic boundary simulations does not correspond to the standard state concentration of 1 M. Consideration of MC-like species allows a helpful decomposition of the catalytic effect into preorganization and reorganization phases. In the preorganization phase, the substrates are brought together into the MC-like species, either in water or in the enzyme active site. In the reorganization phase, the roles of the enzymic and aqueous environments may be compared directly because reorganization of the substrate is about the same in both cases. Analysis of the electric field along the reaction coordinate demonstrates that in water the TS is destabilized with respect to the MC-like species because the polarity of the solute diminishes and consequently the reaction field is also decreased. In the enzyme, the electric field is mainly a permanent field and consequently there is only a small reorganization of the environment. Therefore, destabilization of the TS is lower than in solution, and the activation barrier is smaller.     

Ru(IV)-catalyzed isomerization of allylamines in water: a highly efficient procedure for the deprotection of N-allylic amines

A general and efficient method for the deprotection of N-allylic substrates in aqueous media, using catalytic amounts of the bis(allyl)-ruthenium(IV) complexes [Ru(eta3:eta2:eta3-C12H18)Cl2] and [{Ru(eta3:eta3-C10H16)(micro-Cl)Cl}2], has been developed.     

Mechanism of action of 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one, a very active angular furocoumarin-like sensitizer

The molecular structure of 1,4,6,8-tetramethylfuro[2,3-h]quinolin-2(1H)-one (FQ), a recent furocoumarin-like photosensitizer, has been modified with the aim of reducing its strong genotoxicity, by replacing the methyl group at 4 position with a hydroxymethyl one, and so obtaining 4-hydroxymethyl-1,6,8-trimethylfuro[2,3-h]quinolin-2(1H)-one (HOFQ). This modification gave rise to a strong reduction of lipophilicity and dark interaction with DNA. The formation of monoadducts (MA) was deeply affected, whereas the induction of bifunctional adducts between DNA and proteins (DPC(L>0)) was replaced by an efficient production of DNA-protein cross-links at zero length (DPC(L=0)), probably via guanine damage. Because of its angular molecular structure, HOFQ does not form interstrand cross-links (ISC): therefore, DPC(L=0) and MA represent the main lesions induced by HOFQ in DNA. In comparison with FQ (which induces MA and DPC(L>0)) and 8-methoxypsoralen (8-MOP) (MA, ISC, DPC(L>0)), HOFQ seems to be a more selective agent. In fact, contrary to FQ and 8-MOP, HOFQ, together with a noticeable antiproliferative activity, shows low levels of point mutations in bacteria and of clastogenic effects in mammalian cells. HOFQ is also an efficient apoptosis inducer, especially in comparison with 8-MOP, when tested at equitoxic experimental conditions; this property might be correlated with the complete HOFQ inability of inducing skin erythemas, a well-known side effect of classic furocoumarin photosensitization.     

Mechanisms of peroxidic oxygen transfer to organic substrates : Oxidation of organic sulphides by chromium(vi)oxide diperoxide

The oxidation of organic sulphides (n-Bu₂S, PhSCH₃, Tolyl-SCH₃, p-Cl-C₆H₄SCH₃, and Ph₂S by (HMPT)CrO(O₂)₂1′ in CHCl₃ has been studied. The reaction produces the corresponding sulphoxides in nearly quantitative yields according to a 2:1 stoichiometry of sulphide to metaldiperoxide. A second-order-overall (order one in each of the reagents) kinetic law is obeyed. In parallel, the oxidation of organic sulphides by (HMPT)MoO(O₂)₂1' has been studied. Kinetic data, the observed rate laws, and the effect of inhibitors (HMPT, DABCO) have pointed out that-although 1' is significantly more reactive than 1′—considerable similarity exists between the two metaldiperoxides, in that both appear to act as electrophilic oxidizers. Also, through ¹H, ³¹P and ¹³C NMR investigations have permitted to assess the relevance of equilibria (HMPT)MO(O₂₂ MO(O₂)₂ + HMPT [with M = Mo(VI) or Cr(VI)]in solution, whereas no NMR evidence could be found for significant substrate coordination under the given conditions.     

Enantioseparations of polyhalogenated 4,4’-bipyridines on polysaccharide-based chiral stationary phases and molecular dynamics simulations of selector–selectand interactions

2’-(4-Pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs (TCIBP = 3,3’,5,5’-tetrachloro-2-iodo-4,4’-bipyridyl) are chiral compounds that showed interesting inhibition activity against transthyretin fibrillation in vitro. We became interested in their enantioseparation since we noticed that the M-stereoisomer is more effective than the P-enantiomer. Based thereon, we recently reported the enantioseparation of 2’-substituted TCIBP derivatives with amylose-based chiral columns. Following this study, herein we describe the comparative enantioseparation of both 2’-(4-pyridyl)- and 2’-(4-hydroxyphenyl)-TCIBPs on four cellulose phenylcarbamate-based chiral columns aiming to explore the effect of the polymer backbone, as well as the nature and position of substituents on the side groups on the enantioseparability of these compounds. In the frame of this project, the impact of subtle variations of analyte and polysaccharide structures, and mobile phase (MP) polarity on retention and selectivity was evaluated. The effect of temperature on retention and selectivity was also considered, and overall thermodynamic parameters associated with the analyte adsorption onto the CSP surface were derived from van ’t Hoff plots. Interesting cases of enantiomer elution order (EEO) reversal were observed. In particular, the EEO was shown to be dependent on polysaccharide backbone, the elution sequence of the two analytes being P-M and M-P on cellulose and amylose tris(3,5-dimethylphenylcarbamate), respectively. In this regard, a theoretical investigation based on molecular dynamics (MD) simulations was performed by using amylose and cellulose tris(3,5-dimethylphenylcarbamate) nonamers as virtual models of the polysaccharide-based selectors. This exploration at the molecular level shed light on the origin of the enantiodiscrimination processes.