pH-Responsive N^C-Cyclometalated Iridium(III) Complexes: Synthesis,Photophysical Properties,Computational Results,and Bioimaging Application

Herein we report four [Ir(N^C)₂(L^L)]ⁿ⁺, n = 0,1 complexes (1–4) containing cyclometallated N^C ligand (N^CH = 1-phenyl-2-(4-(pyridin-2-yl)phenyl)-1H-phenanthro[9,10-d]imidazole) and various bidentate L^L ligands (picolinic acid (1), 2,2′-bipyridine (2), [2,2′-bipyridine]-4,4′-dicarboxylic acid (3), and sodium 4,4′,4″,4‴-(1,2-phenylenebis(phosphanetriyl))tetrabenzenesulfonate (4). The N^CH ligand precursor and iridium complexes 1–4 were synthesized in good yield and characterized using chemical analysis, ESI mass spectrometry, and NMR spectroscopy. The solid-state structure of 2 was also determined by XRD analysis. The complexes display moderate to strong phosphorescence in the 550–670 nm range with the quantum yields up to 30% and lifetimes of the excited state up to 60 µs in deoxygenated solution. Emission properties of 1–4 and N^CH are strongly pH-dependent to give considerable variations in excitation and emission profiles accompanied by changes in emission efficiency and dynamics of the excited state. Density functional theory (DFT) and time-dependent density functional theory (TD DFT) calculations made it possible to assign the nature of emissive excited states in both deprotonated and protonated forms of these molecules. The complexes 3 and 4 internalize into living CHO-K1 cells, localize in cytoplasmic vesicles, primarily in lysosomes and acidified endosomes, and demonstrate relatively low toxicity, showing more than 80% cells viability up to the concentration of 10 µM after 24 h incubation. Phosphorescence lifetime imaging microscopy (PLIM) experiments in these cells display lifetime distribution, the conversion of which into pH values using calibration curves gives the magnitudes of this parameter compatible with the physiologically relevant interval of the cell compartments pH.     

Influence of the Degree of Deacetylation of Chitosan and BMP-2 Concentration on Biocompatibility and Osteogenic Properties of BMP-2/PLA Granule-Loaded Chitosan/β-Glycerophosphate Hydrogels

Compositions based on chitosan/β-glycerophosphate hydrogels with highly porous polylactide granules can be used to obtain moldable bone graft materials that have osteoinductive and osteoconductive properties. To eliminate the influence of such characteristics as chain length, degree of purification, and molecular weight on a designed material, the one-stock chitosan sample was reacetylated to degrees of deacetylation (DD%) of 19.5, 39, 49, 55, and 56. A study of the chitosan/β-glycerophosphate hydrogel with chitosan of a reduced DD% showed that a low degree of deacetylation increased the MSCs (multipotent stromal cells) viability rate in vitro and reduced the leukocyte infiltration in subcutaneous implantation to Wistar rats in vivo. The addition of 12 wt% polylactide granules resulted in optimal composite mechanical and moldable properties, and increased the modulus of elasticity of the hydrogel-based material by approximately 100 times. Excessive filling of the material with PLA (polylactide) granules (more than 20%) led to material destruction at a ~10% strain. Osteoinductive and osteoconductive properties of the chitosan hydrogel-based material with reacetylated chitosan (39 DD%) and highly porous polylactide granules impregnated with BMP-2 (bone morphogenetic protein-2) have been demonstrated in models of orthotopic and ectopic bone formation. When implanted into a critical-size calvarial defect in rats, the optimal concentration of BMP-2 was 10 μg/mL: bone tissue areas filled the entire material’s thickness. Implantation of the material with 50 μg/mL BMP-2 was accompanied with excessive growth of bone tissue and material displacement beyond the defect. Significant osteoinductive and osteoconductive properties of the material with 10 μg/mL of BMP-2 were also shown in subcutaneous implantation.     

The unique structure of [(C4H9)4N]3[Pb(NO3)5]—one step forward in understanding transport properties in tetra-n-butylammonium-based solid electrolytes

Structural Chemistry - The crystal and molecular structure of tris(tetrabutylammonium) pentanitratoplumbate(II) was determined and characterized by single-crystal and powder X-ray diffraction and...     

Third Generation Buchwald Precatalysts with XPhos and RuPhos: Multigram Scale Synthesis,Solvent-Dependent Isomerization of XPhos Pd G3 and Quality Control by 1H- and 31P-NMR Spectroscopy

The third generation Buchwald precatalysts Pd(ABP)(Phos)(OMs) (also known as Phos Pd G3)) with XPhos and RuPhos were prepared in multigram scale by a modified procedure (ABP = fragment of C-deprotonated 2-aminobiphenyl, XPhos = 2-dicyclohexylphosphino-2′,4′,6′-triisopropylbiphenyl, RuPhos = 2-dicyclohexylphosphino-2′,6′-diisopropoxybiphenyl, OMs⁻ = CH₃SO₃⁻). The ¹H- and ³¹P-NMR spectra of the title complexes and some impurities, measured by various 1D and 2D techniques, were analyzed in detail. The solvent-dependent isomerization of Pd(ABP)(XPhos)(OMs) was studied by NMR, and the X-ray structures of two isomers were determined. The impurities in precatalysts, such as Pd(ABP)(HABP)(OMs) (HABP—neutral 2-aminobiphenyl coordinated to Pd²⁺ in N-monodentate mode) and PdCl₂(XPhos)₂, were identified and characterized by single crystal X-ray diffraction. A simple method for the quick quality control (QC) of the precatalysts, suitable for routine use, was proposed. The method was based on the assessment of the impurity content on the basis of the ¹H-NMR spectra analysis.     

Malformin-A1 (MA1) Sensitizes Chemoresistant Ovarian Cancer Cells to Cisplatin-Induced Apoptosis

High-grade epithelial ovarian cancer is a fatal disease in women frequently associated with drug resistance and poor outcomes. We previously demonstrated that a marine-derived compound MalforminA1 (MA1) was cytotoxic for the breast cancer cell line MCF-7. In this study, we aimed to examine the effect of MA1 on human ovarian cancer cells. The potential cytotoxicity of MA1was tested on cisplatin-sensitive (A2780S) and cisplatin-resistant (A2780CP) ovarian cancer cell lines using AlamarBlue assay, Hoechst dye, flow cytometry, Western blot, and RT-qPCR. MA1 had higher cytotoxic activity on A2780S (IC50 = 0.23 µM) and A2780CP (IC50 = 0.34 µM) cell lines when compared to cisplatin (IC50 = 31.4 µM and 76.9 µM, respectively). Flow cytometry analysis confirmed the cytotoxic effect of MA1. The synergistic effect of the two drugs was obvious, since only 13% of A2780S and 7% of A2780CP cells remained alive after 24 h of treatment with both MA1 and cisplatin. Moreover, we examined the expression of bcl2, p53, caspase3/9 genes at RNA and protein levels using RT-qPCR and Western blot, respectively, to figure out the cell death mechanism induced by MA1. A significant down-regulation in bcl2 and p53 genes was observed in treated cells compared to non-treated cells (p < 0.05), suggesting that MA1 may not follow the canonical pathway to induce apoptosis in ovarian cancer cell lines. MalforminA1 showed promising anticancer activity by inducing cytotoxicity in cisplatin-sensitive and cisplatin-resistant cancer cell lines. Interestingly, a synergistic effect was observed when MA1 was combined with cisplatin, leading to it overcoming its resistance to cisplatin.     

A Regioselective Synthesis of Novel Functionalized Organochalcogen Compounds by Chalcogenocyclofunctionalization Reactions Based on Chalcogen Halides and Natural Products

The regioselective synthesis of novel functionalized condensed organochalcogen compounds by chalcogenocyclofunctionalization reactions based on chalcogen halides and the natural products thymol and carvacrol has been developed. The reactions of selenium dibromide with allyl thymol and allyl carvacrol proceeded in methylene chloride at room temperature in the presence of NaHCO₃ affording bis[(7-isopropyl-4-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] and bis[(4-isopropyl-7-methyl-2,3-dihydro-1-benzofuran-2-yl)methyl] selenides in 90–92% yield. Similar sulfides were obtained in 70–72% yields by the reaction of sulfur dichloride in chloroform under reflux. Trihalotellanes containing the same organic moieties were synthesized from allyl thymol, allyl carvacrol and tellurium tetrachloride or tetrabromide in quantitative yields. Corresponding functionalized ditellurides were prepared in 91–92% yields by the reduction of the trichlorotellanes with sodium metabisulfite in two-phase solvent system. The comparison of reactivity of sulfur, selenium and tellurium halides in chalcogenocyclofunctionalization and distinguishing features of each reaction were discussed.     

Rosin Derivatives as a Platform for the Antiviral Drug Design

The increased complexity due to the emergence and rapid spread of new viral infections prompts researchers to search for potential antiviral and protective agents for mucous membranes among various natural objects, for example, plant raw materials, their individual components, as well as the products of their chemical modification. Due to their structure, resin acids are valuable raw materials of natural origin to synthesize various bioactive substances. Therefore, the purpose of this study was to confirm the possibility of using resin acid derivatives for the drug design. As a result, we studied the cytotoxicity and biological activity of resin acid derivatives. It was shown that a slight decrease in the viral load in the supernatants was observed upon stimulation of cells (II) compared with the control. When using PASS-online modeling (Prediction of Activity Spectra for Substances), the prediction of the biological activity spectrum showed that compound (I) is capable of exhibiting antiviral activity against the influenza virus. The use of the SWISS-ADME webserver to reveal the drug-like properties of compounds did not directly indicate the presence of antiviral activity. These results indicate the potential of resin acid derivatives as a starting point for extensive research in the study of biological activity.     

An efficient approach towards the convergent synthesis of "fully-carbohydrate" mannodendrimers

Glycosylation of sugar trityl ethers with sugar 1,2-O-(1-cyano)ethylidene derivatives (the trityl-cyanoethylidene condensation) has been applied to the synthesis of highly branched (dendritic) mannooligosaccharides incorporating a Manalpha1-->3(Manalpha1-->6)Man structural motif. The convergent synthetic strategy used to assemble these oligosaccharides was based on the use of glycosyl acceptors and/or a glycosyl donor already bearing this structural motif. The former were represented by mono- and ditrityl ethers of ManalphaOMe, Manalpha1-->3ManalphaOMe, and Manalpha1-->3(Manalpha1-->6)ManalphaX, where X=OMe or SEt. The pivotal glycosyl donor was the peracetylated 1,2-O-(1-cyano)ethylidene-3,6-di-O-(alpha-D-mannopyranosyl)-beta-D-mannopyranose (1), prepared by orthogonal Helferich glycosylation of the known 1,2-O-(1-cyano)ethylidene-beta-D-mannopyranose with tetra-O-acetyl-alpha-D-mannopyranosyl bromide followed by O-acetylation. Glycosylation of acetates of methyl 6-O-trityl-alpha-D-mannopyranoside and methyl 3,6-di-O-trityl-alpha-D-mannopyranoside with one equivalent of the donor 1 gave rise to the isomeric tetrasaccharide derivatives, Manalpha1-->3(Manalpha1-->6)Manalpha1-->6ManalphaOMe and Manalpha1-->3(Manalpha1-->6)Manalpha1-->3ManalphaOMe, respectively. The latter derivative was further mannosylated at the remaining 6-O-trityl acceptor site to give the protected pentasaccharide Manalpha1-->3(Manalpha1-->6)Manalpha1-->3(Manalpha1-->6)ManalphaOMe. The isomeric pentasaccharide, Manalpha1-->3(Manalpha1-->6)Manalpha1-->6(Manalpha1-->3)ManalphaOMe, was prepared by reaction of 1 with the 6-O-trityl derivative of (Manalpha1-->3)ManalphaOMe. In a similar fashion, 6'- and 6"-O-trityl derivatives of the branched trisaccharide Manalpha1-->3(Manalpha1-->6)ManalphaOMe served as precursors for two isomeric mannohexaosides. The 3,6-di-O-trityl ether of ManalphaOMe and the 6',6"-di-O-trityl ether of Manalpha1-->3(Manalpha1-->6)ManalphaX (X=OMe or SEt) were efficiently bis-glycosylated with the donor 1 to give the corresponding protected mannoheptaoside and mannononaoside. The yields of these glycosylations with the donor 1 ranged from 50 to 66 %. Final deprotection of all the oligosaccharides was straightforward and afforded the target products in high yields. Both the acylated and deprotected products were characterized, and the intersaccharide connectivities were elucidated by extensive one- and two-dimensional NMR spectroscopy. The described blockwise convergent approach allows assembly of a variety of 3,6-branched mannooligosaccharides.     

Diastereofacial solid phase synthesis and self-promoted cleavage of a [2.2.1] bicyclic diversity scaffold

[reaction: see text]. We have previously described a diastereofacially selective 1,3-dipolar cycloaddition reaction of isomünchnones with vinyl ethers. While adapting this methodology for solid phase synthesis, we discovered a chemoselective and self-promoted linker aminolysis that provides liberated product in high purity, at a significantly enhanced rate. Herein we describe the implementation of a chiral auxiliary as a solid-phase linker, the detailed investigation of its unique aminolysis, and the utility of this cleavage within a chemical diversity format.