Wisp-like structures in vertical gas–liquid pipe flow revealed by wire mesh sensor studies

A conductance wire mesh sensor system has been employed on a vertical 67 mm diameter pipe with the up flow of air and water mixtures. The measuring system provides time and cross-sectionally resolved information about the spatial distribution of the phases. Statistical information can be extracted and used to identify flow patterns. The fully resolved data has revealed a hitherto unreported structure has been seen in churn flow which could be linked to the wisps in wispy-annular flow.     

Vibrational analysis of d-PCL(530)/siloxane-based hybrid electrolytes doped with two lithium salts

The present study has been focused on environmentally friendly sol–gel-derived electrolytes based on a di-urethane cross-linked d-PCL(530)/siloxane network [where d represents di, PCL identifies the poly(ε-caprolactone) biopolymer, and 530 is the average molecular weight in grams per mole] doped with a wide range of concentration of lithium perchlorate and lithium bis(trifluoromethanesulfonyl)imide. Fourier Transform Infrared and Raman spectroscopies have been applied to evaluate the extent of ionic association. Characteristic bands of the PCL(530) segments, of the urethane cross-links, and of the anions have been examined to gain insight into the cation/biopolymer, cation/anion, and cation/cross-link interactions. In both electrolyte systems, “free” ions and contact ions have been identified. The addition of salt modifies the hydrogen-bonded array of the host matrix, causing the destruction/formation of the urethane/urethane aggregates.     

Imide‐functionalized naphthodithiophene based donor‐acceptor conjugated polymers for solar cells

Donor‐acceptor conjugated polymers containing a new imide‐functionalized naphthodithiophene (INDT) as the acceptor unit and a 2,2'‐bithiophene with varied substituents as the donor unit have been synthesized. The bandgaps of these polymers depend strongly on the dihedral angle of the 2,2'‐bithiophene unit. The 3,3'‐dialkoxy substitution (polymers PDOR / PBOR ) leads to near planar bithiophene conformation due to the well‐known S–O short contact, while the 3,3'‐dialkyl substitution (polymer PDR ) results in significant twisting due to the steric effect. Consequently PDOR / PBOR shows the lowest bandgap of 1.82/1.85 eV while PDR has a bandgap of 2.38 eV. Bulk‐heterojunction solar cells of the polymer/fullerene blends have been fabricated. Preliminary results show that PBOR gives the best device performance with power conversion efficiencies as high as 2.45% in air without any thermal annealing treatment, indicating the promising potential of INDT‐containing conjugated polymers for efficient solar cells. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3818–3828     

Drying of solids with irregular geometry: numerical study and application using a three-dimensional model

This article proposes a numerical solution for the diffusion equation applied to solids with arbitrary geometry using non-orthogonal structured grids for the boundary condition of the first kind. A transient three-dimensional mathematical formulation written in boundary fitted coordinates and numerical formalism to discretize the diffusion equation by using the finite volume method, including numerical analysis of the computational solution are presented. To validate the proposed solution, the results obtained in this work were compared with well-known numerical solution available in literature and good agreement was observed. In order to verify the potential of the proposed numerical solution, it was applied to describe mass transfer inside ceramic roof tiles during drying. For that, it was used experimental data of the drying kinetics at the following temperatures: 55.6; 69.7; 82.7 and 98.6 °C. An optimization technique using experimental dataset has been presented to estimation of transport properties. The obtained statistical indicators enable to conclude that the numerical solution satisfactorily describes the drying processes.     

Synthesis and biomimetic mineralization of l‐proline substituted polyphosphazenes as bulk and nanofiber

This work presents the synthesis of polyphosphazenes bearing L ‐proline methyl ester (ProOMe) and 4‐hydroxy‐l ‐proline methyl ester (HypOMe), aiming for new bioactive polymers for bone repair. The polymers were characterized by ¹H and ³¹P NMR, FTIR, DSC, and TGA. Electrospun fibers were prepared using poly[bis(l ‐proline methyl ester)phosphazene] (PProP), and their potential for biomimetic mineralization, as well as the bulk material, were tested in simulated body fluid (1×SBF). Samples were analyzed between 24 h and 3 weeks of incubation using SEM/EDS and FTIR. After 24 h, spherical and flower‐like shapes of calcium phosphates (CaP) were crystallized on the bulk samples. The nanofibers presented spherical CaP crystals attached to them after 48 h of incubation. The Ca/P molar ratio of the crystals varied from 1.5 to 1.6. According to this study, PProP presents bioactivity in vitro, and its fibers offer sites for CaP nucleation like the collagen fibers in bone. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1318–1327     

Inferring Minimal Feasible Metabolic Networks of <Emphasis Type="Italic">Escherichia coli</Emphasis>

Since the organism contains many redundant reactions, the minimal feasible metabolic network that contains the basic growth function is not the collection of reactions that associate the essential genes. To identify minimal metabolic reaction set is a challenging work in theoretical approach. A new method is presented here to identify the smallest required reaction set of growth-sustaining metabolic networks. The content and number of the minimal reactions for growth are variable in different random processes. Though the different carbon sources also vary the content of the reactions in the minimal metabolic networks, most essential reactions locate in the same metabolic subsystems, such as cofactor and prosthetic group biosynthesis, cell envelope biosynthesis, and membrane lipid metabolism.     

Performance of textile and building materials for a particular evaporative cooling purpose

High energy demand associated to the massive use of air conditioning systems requires careful consideration of passive cooling strategies, with evaporative cooling being recognized as a useful possibility for that purpose. One important factor that influences the performance of evaporative cooling systems is the media material that supports water evaporation process. In this work evaporative cooling capabilities of different building and textile materials were experimentally determined. The major purpose of the study was to select an evaporative cooling material to be used in a more complex passive cooling unit under research development. A test tunnel was constructed for this particular work and the behavior of several samples was analyzed. Results show that among the studied materials a polyester spacer fabric with honeycomb structure presents best performance.     

A new approach to organomanganese compounds: the tellurium/manganese exchange reaction

Diorganomanganese compounds react with aryl, vinyl, and alkynyl tellurides in a tellurium/manganese exchange reaction. The new mixed organomanganese reagents react selectively with electrophiles.