AN INEXPENSIVE STIRRING DEVICE FOR THE 'MERRY-GO-ROUND' PHOTOREACTOR FOR THE DETERMINATION OF REACTION QUANTUM YIELDS

A simple bar magnet is employed to effect stirring of the contents of reaction cells in a'merry-go-round'photoreactor.     

Feasibility of using solid sampling graphite furnace atomic absorption spectrometry for speciation analysis of volatile and non-volatile compounds of nickel and vanadium in crude oil

A method for the direct determination of volatile and non-volatile nickel and vanadium compounds in crude oil without previous treatment using direct solid sampling graphite furnace atomic absorption spectrometry is proposed. The crude oil samples were weighed directly onto solid sampling platforms using a microbalance and introduced into a transversely heated solid sampling graphite tube. In previous work of our group losses of volatile nickel and vanadium compounds have been detected, whereas other nickel and vanadium compounds were thermally stable up to 1300 and 1600 °C, respectively. In order to avoid this problem different chemical modifiers (conventional and permanent) have been investigated. With 400 μg of iridium as permanent modifier, the signal started to drop already after two atomization cycles, possibly because of an interaction of nickel (which is a catalyst poison) with iridium. Twenty micrograms of palladium applied in each determination was found to be optimum for both elements. The palladium was deposited on the platform and submitted to a drying step at 150 °C for 75 s. After that the sample was added onto the platform and submitted to the furnace program. The influence of sample mass on the linearity of the response and on potential measurement errors was also investigated using four samples with different nickel content. For the sample with the lowest nickel concentration the relationship between mass and integrated absorbance was found to be non-linear when a high sample mass was introduced. It was suspected that the modifier had not covered the entire platform surface, which resulted in analyte losses. This problem could be avoided by using 40 μL of 0.5 g L⁻¹ Pd with 0.05% Triton X-100. Calibration curves were established with and without modifier, with aqueous standards, oil-in-water emulsions and the certified reference material NIST SRM 1634c (trace metals in residual fuel oil). The sensitivity for aqueous standards and emulsions was close to that for SRM 1634c, making possible the use of aqueous standards for calibration. The limits of detection and quantification obtained for nickel and vanadium under this condition were found to be 0.02 and 0.06 μg g⁻¹, respectively, for both elements, based on 10 mg of sample. Nickel and vanadium were determined in the samples with (total Ni and V) and without the use of Pd (thermally stable compounds), and the concentration of volatile compounds was calculated by difference. The results were compared with those obtained by high-resolution continuum source graphite furnace atomic absorption spectrometry by emulsion technique; no significant differences were found for total Ni and V at the 95% confidence level according to a Student's t-test.     

C9‐Iridoids from Scrophularia buergeriana

Four new iridoids, buergerinins B–E ( 1 – 4 ), along with three known iridoids, were isolated from the roots of Scrophularia buergeriana. Their structures were identified on the basis of spectroscopic analysis.     

An Efficient Synthesis of Pyrazolo[3,4‐b]Pyridine Derivatives in Aqueous Media

A series of pyrazolo[3,4‐b]pyridines was synthesized by the reaction of 5‐aminopyrazole with benzylidenemalononitrile in aqueous media. The structures were characterized by IR, ¹H NMR, and elemental analysis and were further confirmed by X‐ray diffraction analysis.     

混合模式硅胶基质毛细管电色谱整体柱的制备及其电色谱性能研究

采用温和条件下的溶胶-凝胶技术,成功制备了阴离子交换-反相混合模式硅胶基质毛细管电色谱整体柱.通过调整反应液中不同前体的比例,优化了整体柱的制备条件.通过扫瞄电镜,对柱床进行了表征和分析.实验发现,所制备的整体柱电渗流的方向和大小可随流动相pH值的改变而改变,在酸性和中性条件下,具有从阴极流向阳极的电渗流;当流动相pH值升至约7.5时,电渗流方向发生了反转(由阳极流向阴极).在优化的实验条件下,用所制备的整体柱对所考察的酸性(中性)化合物实现了快速分离,并获得了高达160,000 N/m的柱效.     

Oxygenolysis of flavonoid compounds: DFT description of the mechanism for quercetin.

Flavonoids are naturally occurring phenol derivatives present in substantial amounts in a large variety of plants, fruits and vegetables daily eaten by humans. Most of these compounds exhibit several interesting biological activities, such as antiradical and antioxidant actions. Indeed, by complexation with specific enzymes, flavonoids are notably liable to metabolize molecular dioxygen. On the basis of experimental results describing oxygenolysis of the flavonoid quercetin, activated by the enzyme quercetin 2,3-dioxygenase (2,3-QD),ur attention has focused on the role of metal center in the activation of the substrate quercetin. Thus, in the present study, by means of DFT calculations at the B3LYP/ 6-31(+)G* level on model molecular systems, we describe different mechanisms for dioxygen metabolization by quercetin. Stationary points are described, and energetic and structural analyses along the reaction paths are reported. Our calculations show that the copper cation must act as an oxidant towards the substrate and that the reaction proceeds through a 1,3-cycloaddition.     

A New Asterosaponin from the Starfish Culcita novaeguineae

A new asterosaponin named novaeguinoside A, along with a known saponin, asteronyl pentaglycoside sulfate, was isolated from the starfish Culcita novaeguineae. The new compound was identitied to be sodium 6α-O-{β-D-fucopyranosyl-(1→2)-β-D-fucopyranosyl-(1→4)-[β-D-quinovopyranosyl-(1→2)]-β-D-xylopyranosyl-(1→3)-[β-D-quinovopyranosyl}-5α-pregn-9(11)-en-20-one-3β-yl-sulfate by extensive spectral analysis and chemical evidence.     

Pore size distributions in low‐k dielectric thin films from X‐ray porosimetry

X‐ray reflectivity has been used to determine the mass uptake of probe molecules in porous thin films supported on thick silicon wafers. The adsorption occurs by capillary condensation when the films are exposed to probe vapor at controlled partial vapor pressures. The probe solvent partial pressure was varied by mixing saturated air and dry air at constant temperature or by changing sample temperature at a constant vapor concentration. Pore size distribution in the films can be calculated from the probe uptake with typical porosimetric approaches such as the application of the Kelvin equation to convert partial pressure into pore size. For illustration, the pore size distribution of three different nanoporous thin films, the primary candidate of ultra‐low‐k interlevel dielectrics in the next generation of integrated circuit chips, was determined with this technique. These samples represent different generations of low‐k dielectrics developed by industry. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2170–2177, 2002     

A case of oligomerization on attempted chlorination of an α-hydroxy acetal with the triphenylphosphine tetrachloromethane reagent

Treatment of methyl 3,5-dideoxy-β-$\text{D}$-$\text{erythro}$-pentofuranoside $\text{8}$ with the Ph₃P-CCl₄ reagent gave none of the expected 2-chloro derivative but a mixture of l→2 linked oligosaccharides, $\text{9}$, $\text{10}$ with some higher homologues, terminated by αa 2-chloro-2,3,5-trideoxy-α-$\text{D}$-$\text{threo}$-pentofuranosyl unit at the non reducing end.     

Pretreatment of sugarcane bagasse hemicellulose hydrolysate for xylitol production byCandida guilliermondii

Applied Biochemistry and Biotechnology - In order to remove or reduce the concentrations of toxic substances present in the sugarcane bagasse hemicellulose hydrolysate for xyloseto-xylitol...