Green microfluidic devices made of corn proteins

An alternative green microfluidic device made of zein, a prolamin of corn, can be utilized as a disposable environmentally friendly microchip especially in agriculture applications. Using standard soft lithography and stereo lithography techniques, we fabricated thin zein films with microfluidic chambers and channels. These were bonded to both a glass slide and another zein film. The zein film with microfluidic features bonds irreversibly with other surfaces by vapor-deposition of ethanol to create an adhesive layer resulting in very little or no trapped air and small shape distortion. Zein-zein and zein-glass microfluidic devices demonstrated sufficient strength to facilitate fluid flow in a complex microfluidic design that showed no leakage under high hydraulic pressure. Zein-glass microfluidic devices with serpentine mixing design showed successful fluid manipulation as a concentration gradient of Rhodamine B solution was generated. The ease of fabrication and bonding and the flexibility and moldability of zein offer attractive possibilities for microfluidic device design and manufacturing. These devices can include several unit operations with mixing being one of the most commonly used. The zein-based microfluidic devices, made entirely from a biopolymer from agricultural origin, offer alternative environmentally friendly material choices that are less dependent on limited petroleum based polymer resources.     

Alkoxyamine-cyanoborane adducts: efficient cyanoborane transfer agents

We report the synthesis of the hitherto unknown zwitterionic alkoxyamino cyanoboranes by reduction of O-alkyloximes with sodium cyanoborohydride; unprecedented cyanoboronated N-alkoxyformamidines were also isolated as by-products. Boronated alkoxyamines were found to be efficient cyanoborane transfer agents towards more basic amines, including aminosugars; they were also successfully transformed into neoglycoconjugates by the neoglycorandomization reaction with reducing sugars.     

Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel

Barnacle cement (BC) was beneficially applied on stainless steel (SS) to serve as the initiator anchor for surface-initiated polymerization. The amine and hydroxyl moieties of barnacle cement reacted with 2-bromoisobutyryl bromide to provide the alkyl halide initiator for the surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA). The hydroxyl groups of HEMA polymer (PHEMA) were then converted to carboxyl groups for coupling of chitosan (CS) to impart the SS surface with both antifouling and antibacterial properties. The surface-functionalized SS reduced bovine serum albumin adsorption, bacterial adhesion, and exhibited antibacterial efficacy against Escherichia coli (E. coli). The effectiveness of barnacle cement as an initiator anchor was compared to that of dopamine, a marine mussel inspired biomimetic anchor previously used in surface-initiated polymerization. The results indicate that the barnacle cement is a stable and effective anchor for functional surface coatings and polymer brushes.     

Practical synthesis of (2'R)-2'-deoxy-2'-C-methyluridine by highly diastereoselective homogeneous hydrogenation

Diastereoselective hydrogenation of 2'-deoxy-2'-exo-methyleneuridine was carried out under homogeneous conditions using a low loading of a chiral Rh catalyst. This, coupled with improvements in the synthesis of the substrate, allowed the smooth pilot plant preparation of the title compound on >10 kg scale.     

Synthesis and cytotoxicity evaluation of diastereoisomers and N-terminal analogues of tubulysin-U

Tubulysins are potent anti-mitotic natural compounds and a scalable and efficient synthetic route for generation of its analogues has been developed and extended to the synthesis of diastereoisomers and N-terminal analogues of tubulysin-U. Structure–activity-relationship studies on these synthetic analogues reaffirmed the significance of native stereochemistry of tubulysins for optimal biological activity and cytotoxicity. However, while modification of Tup stereochemistry has only minor effect on the tubulysins cytotoxicity, Tuv stereochemistry is critically important and modification of either Tuv stereocentre produced a dramatic drop in cytotoxicity.     

Efficient Two-Step Synthesis of 11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a Conventional Initiator for Grafting Polymer Brushes from Gold Surfaces via ATRP

11,11′-Dithiobis[1-(2-bromo-2-methylpropionyloxy)undecane], a conventional initiator for grafting polymers from gold surfaces, was synthesized in two steps from 11-mercapto-1-undecanol in 88–92% overall yield. Oxidative dimerization of 11-mercapto-1-undecanol with a catalytic amount of sodium iodide and 30% hydrogen peroxide in ethyl acetate proceeded in 96% yield. Esterification with 2-bromoisobutyryl bromide in dichloromethane was clean and almost quantitative (92% yield) with pyridine used as base, whereas triethylamine gave a messy reaction (64% yield). Alternatively, esterification with 2-bromo-2-methyl-propanoic acid in dichloromethane occurred readily under Steglich's conditions with N,N′-dicyclohexylcarbodiimide (DCC) and a catalytic amount of dimethylaminopyridine (DMAP; 88% yield).     

Structural characterization techniques for the analysis of semiconductor strained heterostructures

A combined method for structural characterization of strained epitaxial heterostructures involving different techniques such as Rutherford backscattering spectrometry (RBS), multiple crystal X-ray diffractometry (MCD) and transmission electron microscopy (TEM) is presented. In order to obtain a complete characterization of the analysed structure, three different quantities are measured independently: the epilayer thickness, the density of misfit dislocations which may appear at the interface, and the significant components of the strain tensor, mainly the tetragonal distortion, affecting the epilayer lattice. In this way the thermodynamic state and the mechanisms of plastic deformation of the structures can be fully investigated. In this contribution we present and discuss the experimental results concerning a set of InP/GaAs samples having different layer thicknesses ranging from 5 to 500 nm. The thickness of the samples has been determined by RBS. Measurements of in-plane strain and tetragonal distortion have been performed by MCD and RBS-channelling respectively, finally TEM has been used for determining the defects densities and distribution.     

EPR and kinetic investigation of free cyanide oxidation by photocatalysis and ozonation

Oxidation of free cyanide in aqueous suspensions of three commercial TiO₂ specimens, with different anatase crystal size, has been carried out in a batch photoreactor by simultaneously applying ozonation and photocatalysis. Dissolved ozone participates both in homogeneous and catalytic reactions with cyanide; the extents of these two processes are comparable to that of the photodegradation with oxygen. The reactivity results are well described by the Langmuir-Hinshelwood kinetic model, providing the values of the kinetic and equilibrium adsorption constants for the catalytic and photocatalytic reactions contributing to cyanide oxidation. The cyanide concentration decreases faster with time for catalysts with increasing anatase crystal size, being more marked under UV irradiation. EPR studies on gaseous ozone adsorption on the three samples in the dark have shown stronger ozone interactions with Ti⁴⁺ and O^2? ions of the samples with largest anatase crystal size, leading to the formation of significant signals of Ti³⁺ and _s O^??O₂ radicals than with the anatase with the lowest crystal size, where ozone was mainly adsorbed on water molecular arrangements covering its surface. The hampering of the ozone and/or cyanide adsorption by the water molecular arrangements covering the surface of the catalyst with the lowest crystal size would justify the low cyanide degradation rate observed for this sample.     

Structures of Highly Twisted Amides Relevant to Amide N−C Cross‐Coupling: Evidence for Ground‐State Amide Destabilization

Herein, we show that acyclic amides that have recently enabled a series of elusive transition‐metal‐catalyzed N?C activation/cross‐coupling reactions are highly twisted around the N?C(O) axis by a new destabilization mechanism of the amide bond. A unique effect of the N‐glutarimide substituent, leading to uniformly high twist (ca. 90°) irrespective of the steric effect at the carbon side of the amide bond has been found. This represents the first example of a twisted amide that does not bear significant steric hindrance at the α‐carbon atom. The ¹⁵N NMR data show linear correlations between electron density at nitrogen and amide bond twist. This study strongly supports the concept of amide bond ground‐state twist as a blueprint for activation of amides toward N?C bond cleavage. The new mechanism offers considerable opportunities for organic synthesis and biological processes involving non‐planar amide bonds.     

Poly‐l‐Lactic Acid Nanofiber–Polyamidoamine Hydrogel Composites: Preparation,Properties, and Preliminary Evaluation as Scaffolds for Human Pluripotent Stem Cell Culturing

Electrospun poly‐l ‐lactic acid (PLLA) nanofiber mats carrying surface amine groups, previously introduced by nitrogen atmospheric pressure nonequilibrium plasma, are embedded into aqueous solutions of oligomeric acrylamide‐end capped AGMA1, a biocompatible polyamidoamine with arg‐gly‐asp (RGD)‐reminiscent repeating units. The resultant mixture is finally cured giving PLLA‐AGMA1 hydrogel composites that absorb large amounts of water and, in the swollen state, are translucent, soft, and pliable, yet as strong as the parent PLLA mat. They do not split apart from each other when swollen in water and remain highly flexible and resistant, since the hydrogel portion is covalently grafted onto the PLLA nanofibers via the addition reaction of the surface amine groups to a part of the terminal acrylic double bonds of AGMA1 oligomers. Preliminary tested as scaffolds, the composites prove capable of maintaining short‐term undifferentiated cultures of human pluripotent stem cells in feeder‐free conditions.