Bioelectrochemical determination of lactic and malic acids in wine

Electroanalytical methods based on biosensor technology and differential pH measurement for the determination of l-lactic and l-malic acids in wine were developed. Lactic acid was determined according to two procedures consisting of the use of two lactate electrochemical biosensors, one based on a Clark O(2) probe and the other based on the H(2)O(2) probe. The two probes were assembled employing a polymeric membrane where the enzyme lactate oxidase was previously immobilized. Both sensors exhibited high storage and operational stabilities, and good reproducibility when used in wine matrix. Measurement of lactate was carried out using two different flow-through cells assembled with the lactate probes. The low detection limit of these probes and the relatively high concentration of lactate in wine samples required a serial dilution in the range 1:100 to 1:200, thus eliminating all potential electrochemical or enzyme interferences present in the sample. Malic acid was determined using a differential commercially available pH-meter and an enzymatic procedure. For this analysis, we employed the malic enzyme (EC 1.1.1.40) and the NADP(+) cofactor. The pH variation due to the action of this enzyme on malic acid was found to be proportional to the malic acid present in the sample. Experimental parameters such as pH, temperature, and co-factor concentration were optimized, resulting in malate determination in less than 1 min with good reproducibility. Various samples of wine and wine musts were assayed for lactate with the two biosensor procedures, and for malate with differential pH-metry. The results when compared with those obtained with the commonly used spectrophotometric procedure correlated well.     

Preparation of USY zeolite VOx supported catalysts from V(AcAc)3 and NH4VO3. Catalytic properties for the dehydrogenation of n-butane in oxygen-free atmosphere

The preparation of different samples of vanadia supported on ultrastable zeolite (VO(x)/USY) is discussed. The samples were prepared in order to obtain highly dispersed V-species, avoiding the formation of crystalline vanadia and the destruction of the zeolite framework. Two methods were employed for preparing VO(x)/USY samples: an organic route using V(AcAc)3 and an inorganic route using NH4VO3. The characterization of the samples was performed with XRD, TPR, NH3-TPD, and N2 isotherms. From these results it is concluded that when VO(x) is supported on the surface of USY from acidic aqueous solution of ammonium metavanadate, the destruction of the zeolite framework is accomplished. For higher pH values in the impregnating solution, undesired V2O5 is formed on the USY surface. On the other hand, VO(x)/USY prepared from the organic precursor shows no destruction of the USY structure. In addition, highly dispersed VO(x) are formed, though for relatively high V loadings (6%) an obstruction of the zeolite windows takes place. The samples are tested as catalysts for gas phase dehydrogenation of n-butane to olefins. The catalysts prepared from NH4VO3 are almost inactive for the reaction. On the other hand, both samples prepared from V(AcAc)3 present initial conversion levels in the 8-12% range. However, the selectivity depends on the V loading, the catalysts with 6% loading being the most selective (75%). The catalytic patterns of the samples (activity and selectivity) are in agreement with the physicochemical features of the VO(x)/USY surface.     

Solid-state supramolecular organization, established directly from powder diffraction data, and photoluminescence efficiency of rigid-core oligothiophene-S,S-dioxides

The "rigid-core" material 3,5-dimethyl-2,3'-bis(3-methylthiophene)-dithieno[3,2-b:',3'-d]thiophene-4,4-dioxide (DTTOMe4) has the highest photoluminescence ever reported for thiophene-based molecules in the solid state. We report the structure of this material, determined directly from powder X-ray diffraction data using the Genetic Algorithm method for structure solution, followed by Rietveld refinement, and the structural properties are discussed in relation to the structures of the corresponding subsystems DTTO and DTTOMe. While the crystal structures of the latter compounds contain cofacial dimers, the crystal structure of DTTOMe4 comprises layers of molecules aligned in an antiparallel fashion. Intermediate neglect of differential overlap with single configuration interaction (INDO/SCI) calculations on the intermolecular interactions in the three crystal structures show that the different solid-state photoluminescence efficiencies of DTTOMe4, DTTOMe, and DTTO cannot be correlated with the different types of dipole-dipole alignment in the solid state. Instead, photoluminescence efficiencies correlate well with the rate of formation of nonradiatively decaying charge-transfer pairs upon photoexcitation. Because of larger intermolecular distances in DTTOMe4, the photoluminescence is less effectively quenched by charge-transfer processes than in DTTOMe and DTTO.     

Dramatic changes in geometry after ionization: experimental and theoretical studies on the electronic properties of fluorocarbonyl (mono-, di-, and tri-) sulfur compounds

In this work, we present a complete study on He I photoelectron spectroscopy (PES) for the fluorocarbonyl mono-, di-, and trisulfur compounds FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F. After optimizations of the structure for stable conformers at different levels of theory, a complete theoretical study involving the calculation of the ionization energies using orbital valence Green's functional (OVGF) was performed. Calculations of radical-cationic forms were carried out in order to compare their properties with those of the neutral molecules. The first IP values are 10.7, 9.0, and 10.5 eV for FC(O)SCl, FC(O)SSCH(3), and FC(O)SSSC(O)F, respectively. The groups bonded to the S atom mainly influence the ionizations originating from the sulfur lone pairs. A wide electronic delocalization in the FC(O)S moiety can be deduced from experimental and theoretical results, which leads to a strong energetic stabilization of the n' '(S) (sulfur lone pair pi orbital). Other conclusions relate to effects on the substituents attached to the S atom and the importance of the molecular planarity in the orbital stabilization of the FC(O)S moiety for the neutral molecules. It is worthwhile mentioning that FC(O)SCl retains its planar structure after ionization, but drastic changes occur in the geometry of both FC(O)SSCH(3) and FC(O)SSSC(O)F. The FC(O)SSCH(3) molecule adopts a heavy atom planar structure after ionization. The FC(O)SSS moiety becomes a planar form after the ionization of the FC(O)SSSC(O)F molecule, whereas the second C(O)F group maintains its original conformation with respect to the SSS group.     

The effects of oxygenation on the optical properties of dimethyl-dithienothiophenes: comparison between experiments and first-principles calculations

Modifications of the optical properties of dimethyl-dithienothiophenes due to the oxygen functionalization of the central sulfur atom are investigated. We have measured the absorption, photoluminescence (PL) and PL excitation spectra, the PL quantum efficiencies, and the PL decay times. These experimental results are interpreted and compared with first-principles time-dependent density-functional theory calculations, which predict, for the considered systems, excitation and emission energies with an accuracy of 0.1 eV. It is found that the oxygenation strongly changes optical and photophysical properties. These effects are related to the modifications of the energetically lowest-unoccupied molecular orbital and the energetically second highest occupied one, which change the relative position of the two lowest singlet and triplet excited states.     

Preparation, characterization and thiol-thione tautomeric studies of 2-thiono-4-methyl-5-(2,2,2-trifluoro-1-trifluoromethylethyl)-1,3-thiazoline

The synthesis of a new trifluoromethyl 2-mercapto-1,3-thiadiazole derivative from 5,5,5-trifluoro-4-(trifluoromethyl)-3-penten-2-one, its structural study in the solid state and in the liquid phase and the thiol-thione tautomeric equilibrium study of the title compound are reported. The crystalline structure shows short intermolecular FF contacts. Theoretical calculations using HF and DFT methods were performed. Vibrational spectra were calculated for both tautomers and compared with experimental data. The experimental and theoretical results can be interpreted in terms of the existence of a thione tautomer in the solid and in solution.     

Diastereoselective synthesis of 2-phenylselenenyl-1,3-anti-diols and 2-phenylselenenyl-1,3-anti-azido-alcohols via hydroxy and azido-selenenylation reactions

A method to synthesize 2-phenylselenenyl-1,3-anti-diols and 2-phenyl- selenenyl-1,3-anti-azidoalcohols via hydroxy- or azido-selenenylation of trans-allylic alcohols is reported. Moreover, the first example of hydroxyl-selenenylation of an allylic azide is presented. Yields ranging from moderate to good and diastereomeric ratios up to 95:5 are achieved.     

Polychloroprene rubbers used for adhesives: a small angle X-ray scattering preliminary investigation under stretching

Summary Three types of polychloroprene rubbers (Du Pont de Nemours Co. Neoprenes AD, WHV and W) used for adhesives and having different crystallization rates have been investigated.The mechanical properties of the Neoprenes samples were determined and the films were examined under stretching by SAXS for a preliminary investigation on their different superreticular order.

---

Zusammenfassung Drei Typen von Polychloropren-Kautschuk mit verschiedener Kristallisationsgeschwindigkeit (Neoprene AD, WHV und W von Du Pont de Nemours), die als Klebemittel dienen, wurden als gedehnte Filme mechanisch und röntgenographisch (SAXS) untersucht. Sie zeigen Unterschiede in der Überstruktur.

     

Direct determination of t,t-muconic acid in human urine by two-dimensional liquid chromatography

The accurate determination of E,E-2,4-hexadiendioic acid (t,t-muconic acid), an important urinary biomarker of benzene exposure, is directly performed in human urine by a new two-dimensional liquid chromatographic method. After a first partial separation of urine components by a reversed-phase mechanism and the focalisation of the anionic analytes on a small anion-chromatographic column, a conventional ion-chromatographic analysis with UV detection is carried out. The analytical procedure is fully controlled by the HPLC instrumentation software using an eight-port switch valve. If compared with conventional one-dimensional procedures, the new method produces chromatograms containing a limited number of well resolved peaks and consequently allows better analytical performances: no interfering peaks, absence of bias, repeatability better than 5% in the concentration range 0.09-5 mg dm-3 and a detection limit of 4.0 micrograms dm-3 (alpha = beta = 0.05) for the analysis of real samples.     

A new class of aromatic polyetheraroylhydrazides. I. Synthesis and chemical–physical characterization

A series of new aromatic polyetheraroylhydrazides incorporating 4-oxybenzoyl units has been synthesized, whose general formula was [CONHNHCO? O? O–(CH₂)_x? O? phenyl O-CONHNHCOO]_n with x values in the range of 2 to 12. The increasing number of methylene units in the backbone gave rise to polymers which melted before the hydrazidic linkage underwent thermal cyclation to oxadiazole. Moreover, many polymers showed multiple endotherms on melting. X-ray diffraction studies confirmed a crystalline organization of polyhydrazides for methylene units above 4. © 1993 John Wiley & Sons, Inc.