NMR studies into colloidal stability and magnetic order in fatty acid stabilised aqueous magnetic fluids

We report the physico-chemical characterisation of fatty acid stabilised aqueous magnetic fluids, which are ideal systems for studying the influence of nanoparticle aggregation on the emergent magnetic resonance properties of the suspensions. Stable colloids of superparamagnetic magnetite, Fe(3)O(4), nanoparticle clusters in the 80 to 100 nm size range were produced by in situ nanoparticle growth and stabilisation, and by suspending pre-formed nanoparticles. NMR relaxation analysis shows that the magnetic resonance properties of the two types of suspension differ substantially and provides new insights into how the relaxation mechanisms are determined by the organisation of the nanoparticles within the clusters.     

Redetermination of the X-ray structure of nitroxylcobalamin: base-on nitroxylcobalamin exhibits a remarkably long Co-N(dimethylbenzimidazole) bond distance

The X-ray structures of three new crystals of nitroxylcobalamin (NOCbl) have been determined. Unlike our earlier reported structure in which NOCbl was partially oxidized (L. Hannibal, C. A. Smith, D. W. Jacobsen and N. E. Brasch, Angew. Chem., Int. Ed. 2007, 46, 5140), the O atom of the nitroxyl ligand is located in a single position with a N=O bond distance of 1.12-1.14 ?, consistent with a double bond. The Co-N-O angle is in the 118.9-120.3 ? range. The α-axial Co-N(dimethylbenzimidazole) (Co-NB3) bond distance is a remarkable 2.32-2.35 ? in length, ~0.1 ? longer than that reported for all other cobalamin structures. The change in the Gibbs free energy for the base-on/base-off equilibrium now correlates extremely well with the Co-NB3 bond distance, as observed for other cobalamins.     

Pyroxene inclusions in paleo-Christian mosaic tesserae: a new tool for constraining the glass manufacturing temperature

The mineral inclusions of two orange glass tesserae from paleo-Christian mosaics were investigated in order to derive the melting temperature reached during their production (sourced from Padua and Vicenza, Veneto region, Italy). In particular, clinopyroxene crystals were studied by single-crystal X-ray diffraction and electron microprobe WDS analysis. The crystals show C2/c symmetry, typical of disordered Ca/Na and Mg/Al distributions indicating high-temperature of formation (>700°C). The cation site populations were obtained by combining results from the two experimental techniques enabled us to derive the following stoichiometric formula:

Asymptotics of decreasing solutions of coupled p-Laplacian systems in the framework of regular variation

Under the assumption that the coefficients are regularly varying functions, existence and asymptotic form of strongly decreasing solutions are here studied for a system of two coupled nonlinear second-order equations of Emden–Fowler type, satisfying a subhomogeneity condition. Several examples of application of the main result and a comparison with existing literature complete the paper.     

Metal oxidation states in biological water splitting

A central question in biological water splitting concerns the oxidation states of the manganese ions that comprise the oxygen-evolving complex of photosystem II. Understanding the nature and order of oxidation events that occur during the catalytic cycle of five S_i states (i = 0–4) is of fundamental importance both for the natural system and for artificial water oxidation catalysts. Despite the widespread adoption of the so-called “high-valent scheme”—where, for example, the Mn oxidation states in the S₂ state are assigned as III, IV, IV, IV—the competing “low-valent scheme” that differs by a total of two metal unpaired electrons (i.e. III, III, III, IV in the S₂ state) is favored by several recent studies for the biological catalyst. The question of the correct oxidation state assignment is addressed here by a detailed computational comparison of the two schemes using a common structural platform and theoretical approach. Models based on crystallographic constraints were constructed for all conceivable oxidation state assignments in the four (semi)stable S states of the oxygen evolving complex, sampling various protonation levels and patterns to ensure comprehensive coverage. The models are evaluated with respect to their geometric, energetic, electronic, and spectroscopic properties against available experimental EXAFS, XFEL-XRD, EPR, ENDOR and Mn K pre-edge XANES data. New 2.5 K ⁵⁵Mn ENDOR data of the S₂ state are also reported. Our results conclusively show that the entire S state phenomenology can only be accommodated within the high-valent scheme by adopting a single motif and protonation pattern that progresses smoothly from S₀ (III, III, III, IV) to S₃ (IV, IV, IV, IV), satisfying all experimental constraints and reproducing all observables. By contrast, it was impossible to construct a consistent cycle based on the low-valent scheme for all S states. Instead, the low-valent models developed here may provide new insight into the over-reduced S states and the states involved in the assembly of the catalytically active water oxidizing cluster.     

Reversible Mechanical Switching of Magnetic Interactions in a Molecular Shuttle

An acid–base switchable molecular shuttle based on a [2]rotaxane, incorporating stable radical units in both the ring and dumbbell components, is reported. The [2]rotaxane comprises a dibenzo[24]crown-8 ring (DB24C8) interlocked with a dumbbell component that possesses a dialkylammonium (NH₂⁺) and a 4,4′-bipyridinium (BPY²⁺) recognition site. Deprotonation of the rotaxane NH₂⁺ centers effects a quantitative displacement of the DB24C8 macroring to the BPY²⁺ recognition site, a process that can be reversed by acid treatment. Interaction between stable 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radicals connected to the ring and dumbbell components could be switched between noncoupled (three-line electron paramagnetic resonance (EPR) spectrum) and coupled (five-line EPR spectrum) upon displacement of the spin-labelled DB24C8 macroring. The complete base- and acid-induced switching cycle of the EPR pattern was repeated six times without an appreciable loss of signal, highlighting the reversibility of the process. Hence, this molecular machine is capable of switching on/off magnetic interactions by chemically driven reversible mechanical effects. A system of this kind represents an initial step towards a new generation of nanoscale magnetic switches that may be of interest for a variety of applications.     

Competitive Gold‐Promoted Meyer–Schuster and oxy‐Cope Rearrangements of 3‐Acyloxy‐1,5‐enynes: Selective Catalysis for the Synthesis of (+)‐(S)‐γ‐Ionone and (−)‐(2S,6 R)‐cis‐γ‐Irone

We report a simple, highly stereoselective synthesis of (+)‐(S)‐γ‐ionone and (‐)‐(2S,6R)‐cis‐γ‐irone, two characteristic and precious odorants; the latter compound is a constituent of the essential oil obtained from iris rhizomes. Of general interest in this approach are the photoisomerization of an endo trisubstituted cyclohexene double bond to an exo vinyl group and the installation of the enone side chain through a [(NHC)Au^I]‐catalyzed Meyer–Schuster‐like rearrangement. This required a careful investigation of the mechanism of the gold‐catalyzed reaction and a judicious selection of reaction conditions. In fact, it was found that the Meyer–Schuster reaction may compete with the oxy‐Cope rearrangement. Gold‐based catalytic systems can promote either reaction selectively. In the present system, the mononuclear gold complex [Au(IPr)Cl], in combination with the silver salt AgSbF₆ in 100:1 butan‐2‐one/H₂O, proved to efficiently promote the Meyer–Schuster rearrangement of propargylic benzoates, whereas the digold catalyst [{Au(IPr)}₂(μ‐OH)][BF₄] in anhydrous dichloromethane selectively promoted the oxy‐Cope rearrangement of propargylic alcohols.     

Gilch Synthesis of Poly(ortho‐Phenylene Vinylenes): A Powerful Access to High‐Molecular‐Weight Blue‐Emitting Polymers

For the first time, the successful Gilch synthesis of poly(ortho‐phenylene vinylenes) (ortho‐PPVs) is reported. The molar mass of the constitutionally homogeneous ortho‐PPVs reaches values as high as M_w ≈ 300 000 Da. The ortho‐connectivity of the repeating units forces the chains to assume closely packed conformations even in good solvents. Significant perturbation of the π–electron systems and considerable shortening of the conjugation lengths are the consequences. UV–vis absorption and photoluminescence maxima consequently are shifted clearly toward shorter wavelengths compared to, e.g., classic para‐PPVs.

     

Biomimetic anchors for antifouling and antibacterial polymer brushes on stainless steel

Barnacle cement (BC) was beneficially applied on stainless steel (SS) to serve as the initiator anchor for surface-initiated polymerization. The amine and hydroxyl moieties of barnacle cement reacted with 2-bromoisobutyryl bromide to provide the alkyl halide initiator for the surface-initiated atom transfer radical polymerization (ATRP) of 2-hydroxyethyl methacrylate (HEMA). The hydroxyl groups of HEMA polymer (PHEMA) were then converted to carboxyl groups for coupling of chitosan (CS) to impart the SS surface with both antifouling and antibacterial properties. The surface-functionalized SS reduced bovine serum albumin adsorption, bacterial adhesion, and exhibited antibacterial efficacy against Escherichia coli (E. coli). The effectiveness of barnacle cement as an initiator anchor was compared to that of dopamine, a marine mussel inspired biomimetic anchor previously used in surface-initiated polymerization. The results indicate that the barnacle cement is a stable and effective anchor for functional surface coatings and polymer brushes.