Synthesis and electropolymerization studies of non-aggregated (4-{3-[3-(dimethylamino,diethylamino)phenoxy]propoxy}phenyl)propanoxy substituted silicon naphthalocyanines

In this study, 3-(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propan-1-ol, 3-(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propan-1-ol and axially disubstituted silicon naphthalocyanines (SiNc) bearing electropolymerizable bis-[(4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy] and bis-[(4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy] units were synthesized for the first time. Aggregation behavior of SiNcs was examined in different solvents and concentrations in DMSO. In all solvents and concentrations, SiNcs were non-aggregated. Also, electrochemical studies of SiNcs were investigated by cyclic and square wave voltammetry. While SiNcs gave only naphthalocyanine-based reduction process during the cathodic potential scans, they were electropolymerized on the working electrode during the anodic potential scan because of the oxidative electropolymerization of (4-{3-[3-(dimethylamino)phenoxy]propoxy}phenyl)propanoxy and (4-{3-[3-(diethylamino)phenoxy]propoxy}phenyl)propanoxy groups on the substituents of the complexes.     

Novel mixed-ligand complexes of coumarilate/<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>′-diethylnicotinamide with some transition metals

Coordination complexes of transition metal cations (Co^II, Ni^II, Cu^II and Zn^II) containing coumarilate and N,N′-diethylnicotinamide were synthesized. The structural characterization and thermal behaviour analysis of novel samples synthesized were conducted through elemental analysis, magnetic susceptibility, solid-state UV–Vis, direct and injection probe mass spectra, FTIR spectra, thermoanalytic TG-DTG/DTA and single crystal X-ray diffraction methods. The structural details of single crystals of [Co(dena)₂(H₂O)₄](coum)₂ (I) and [Cu(coum)₂(dena)₂(H₂O)₂] (III) complexes were resolved completely. Moreover, the results of analysis obtained for [Ni(coum)₂(dena)₂(H₂O)₂] (II) and [Zn(dena)₂(H₂O)₄](coum)₂ (IV) complexes were interpreted considering the samples with crystal structures defined and made assumptions about the structural details. It was determined that the complex of Co^II metal cation has salt-type structure and the coordination number of metal is accomplished to six as the sum of 4 mol of water and also 2 mol of N,N′-diethylnicotinamide ligands in trans position located within the coordination sphere. It was observed that 2 mol of coumarilate anions are located outside the coordination sphere and have stabilized to the charge (2+) of metal. The Cu^II complex has totally molecular structure, and the coordination sphere of metal cation was 6 as the sum of 2 mol of water, 2 mol of N,N′-diethylnicotinamide and 2 mol of monoanionic monodentate coumarilate ligands. All ligands have been located in –trans position. The geometry of both complex structures is distorted octahedral. It is assumed that the Ni^II complex structure is isostructural with Cu^II complex structure and also does Zn^II complex with Co^II structure. It was determined that the decomposition products obtained from thermal analysis are the oxides of related metal cations.     

Weakly automorphism invariant modules and essential tightness

While a module is pseudo-injective if and only if it is automorphism-invariant, it was not known whether automorphism-invariant modules are tight. It is shown that weakly automorphism-invariant modules are precisely essentially tight. We give various examples of weakly automorphism-invariant and essentially tight modules and study their properties. Some particular results: (1) R is a semiprime right and left Goldie ring if and only if every right (left) ideal is weakly injective if and only if every right (left) ideal is weakly automorphism invariant; (2) R is a CEP-ring if and only if R is right artinian and every indecomposable projective right R-module is uniform and essentially R-tight.     

A spiro to ansa rearrangement in cyclotriphosphazene derivatives

Nucleophilic substitution reactions of cyclotriphosphazene derivatives having five-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(2)X] (X = NH or O) with alkoxides (of tetraethylene glycol and some mono-functional alcohols) give unexpected rearrangements to form stable seven-membered ring ansa compounds, even though crystallographic evidence shows ring distortion and compression of the cyclophosphazene ring. With weaker nucleophiles such as sodium phenoxide and pyrrolidine substitution at a PCl2 group is preferred and no rearrangement takes place. In contrast, reactions of the analogous phosphazenes containing six-membered spiro rings, N(3)P(3)Cl(4)[O(CH(2))(3)X], with all of the above reagents give only normal substitution reactions at the PCl2 moieties and no rearrangement products. The spiro to ansa rearrangements in cyclophosphazenes are remarkable as the reported primary reaction products with the same difunctional reagents HO(CH(2))(2)XH are predominantly spiro, with some dangling and bridging derivatives, but no ansa compounds.     

Investigation of DTS effect on r.f. magnetron sputtered ZnO thin films

The aim of this study depends on understanding the effect of target‐to‐substrate distance (D_TS) on ZnO thin films deposited by r.f. magnetron sputtering on to glass substrates at room temperature conditions. The D_TS was changed from 35 mm to 65 mm with steps of 5 mm at 165 W and 0.2 Pa. The deposition rate of the films were ranged from 76 Ǻ / min to 146 Ǻ / min, while 10^‐3 Ω.cm was obtained as the resistivity value with the help of four point probe technique. The structural investigations were carried out by using both the x‐ray diffraction (XRD) and high resolution transmission electron microscopy. According to XRD observations, the films were (002) oriented. Surface behaviour of the ZnO films was examined with atomic force microscopy and scanning electron microscopy. The root mean square (RMS) values were varied from 4.6 nm to 22.8 nm. Also, optical properties were obtained from UV–visible spectrophotometer and the transmittances as around 80 %. At 45 mm D_TS value, the minimum resistivity measured as 9 × 10^{− 4} Ω.cm with 76 Ǻ / min deposition rate. The RMS was obtained as 4.9 nm and transmission was measured as 85.30 %, while band gap was 3.45 eV.     

Fabrication of collagen immobilized electrospun poly (vinyl alcohol) scaffolds

In the development of tissue engineering scaffolds, the interactions between material surface and cells play crucial roles. The biomimetic 3‐D scaffolds absolutely provide better results for fulfilling requirements such as porosity, interconnectivity, cell attachment and proliferation. In this study, 3‐D electrospun scaffolds were prepared by using an electrospinning technique. Photo cross‐linkable polyvinyl alcohol was used as a polymeric matrix. During the electrospinning, the nanofibers were cross‐linked with in situ ultraviolet radiation. The crosslinked polymer fibers were achieved in a simple process at a single step. Nanofiber surface was modified with collagen by a chemical approach. The chemical structures were proven by attentuated total reflectance Fourier transform infrared spectroscopy and proton nuclear magnetic resonance. The surface morphology of the nanofibers was characterized by scanning electron microscope (SEM). Morphological investigations show that the resulting nanofibrous matrix has uniform morphology with a diameter of 220–250 nm. In vitro attachment and growth of 3T3 mouse fibroblasts and human umbilical vein endothelial cells (ECV304) cells on polyvinyl alcohol‐based nanofiber mats were also investigated. Cell attachment, proliferation, and methylthiazole tetrazolium cytotoxicity assays indicated good cell viability throughout the culture time, which was also confirmed by SEM analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Tuning Photoinduced Intramolecular Electron Transfer by Electron Accepting and Donating Substituents in Oxazolones

The solvatochromic and spectral properties of oxazolone derivatives in various solvents were reported. Fluorescence spectra clearly showed positive and negative solvatochromism depending on substituents. The solvatochromic plots and quantum chemical computations at DFT-B3LYP/6-31?+?G(d,p) level were used to assess dipole moment changes between the ground and the first excited singlet-states. The electron accepting nitro substituent at the para-position increased the π-electron mobility, however, the 3,5-dinitro substituent decreased the π-electron mobility as a result of inverse accumulation of the electronic density as compared with that of its ground state. Experimental and computational studies proved that the photoinduced intramolecular electron transfer (PIET) is responsible for the observed solvatochromic effects. We demonstrate that PIET can be finely tailored by the position of the electron accepting and donating substituents in the phenyl ring of the oxazolone derivatives. We propose that the photoactive CPO derivatives are new molecular class of conjugated push-pull structures using azlactone moiety as the π-conjugated linker and may find applications in photovoltaic cells and light emitting diodes.     

Structural and photophysical characterization, topological and conformational analysis of 2-o-tolyl-4-(3-N,N-dimethylaminophenyl-methylene)-oxazol-5-one

A novel oxazole-5-one derivative 2-o-tolyl-4-(3-N,N-dimethylaminophenylmethylene)-oxazol-5-one (TDPO) C₁₉H₁₈N₂O₂ is synthesized and characterized and the crystal structure is determined by X-ray crystallography. TDPO is monoclinic in the P2₁/c space group. The molecule adopts the Z configuration. To enlighten the flexibility of TDPO, the selected torsion angle is varied from −180° to 180° in each 10° separately, and the molecular energy profile is calculated and analyzed by density functional calculations. In addition, Bader’s QTAIM analysis is performed to investigate the intramolecular weak interactions.