Molecular versus Silica-Supported Iridium Water Oxidation Catalysts

A stringent comparison between two pairs of molecular/immobilized water oxidation catalysts ([Cp^*Ir(Me-pica)Cl], 1 , versus 1_SiO₂ , Me-pica=κ²-N-methyl-picolinamide; [Cp^*Ir(pysa)NO₃], 2 , versus 2_SiO₂ , pysa=κ²-pyridine-2-sulfonamide]) reveals distinctive catalytic trends. While the molecular compound 1 exhibits a substantial higher activity than the analogous immobilized system 1_SiO₂ , under all the experimental conditions explored, the contrary is found with 2 that is far less active than its immobilized counterpart 2_SiO₂ . This is explained by the unique tendency of 2 to form dimeric complexes [Cp^*Ir-(κ²-μ₂-Hpysa)(κ²-μ₂-pysa)IrCp^*], 2 a , in phosphate buffered solution at pH 7, and [Cp^*Ir-(κ²-μ₂-Hpysa)₂IrCp^*], 2 b , in water. 2 a and 2 b have been completely characterized in solution by multinuclear and multidimensional NMR spectroscopy. They have been also isolated as single crystals and their structure in solid state determined by X-Ray diffractometry. 2 a and 2 b appear to be off-cycle species, whose formation is detrimental for water oxidation activity, as indicated by the observation of a long induction period when 2 a is used as catalytic precursor. In addition, TOF versus ΔE (E−E⁰=−RT/nF ln([IO₄⁻]/[IO₃⁻]) trends for the first two runs do not overlap for catalyst 2 and TOF_max is remarkably higher in the second run upon the addition of fresh NaIO₄. In the immobilized system 2_SiO₂ the detrimental associative processes are likely inhibited leading to an activity higher than that of 2 .     

Force field parameters for molecular mechanical simulation of dehydroamino acid residues

Parameters suitable to describe the conformational behavior of α – β unsaturated aminoacids and peptides in the framework of an existing force field for nucleic acids and proteins (S.J. Weiner, P.A. Kollman, D.A. Case, U. Chandra Singh, C. Ghio, G. Alagona, S. Profeta, Jr., and P. Weiner, J. Am. Chem. Soc., 106 , 765 (1984)) are proposed and tested. Attention is primarily focused on dehydrophenylalanine and dehydroalanine containing peptides. The values of the parameters needed were obtained from experimental measurements available in the literature and from ad hoc quantum mechanical calculations. The selected values have subsequently been adapted and refined through molecular mechanical simulations on model compounds, such as Ac-ΔPhe-NMe, for which it was possible to carry out STO-3G/SCF calculations to check selected points on the ?,ψ conformational map, and Ac-ΔAla-NMe, where the comparison was carried out at the 4-31G level. The newly determined force field was then applied to Ac-ΔPhe-Ala-ΔPhe-NMe, whose minimal energy structures allowed us to explain the different circular dichroism behavior observed in CH₂Cl₂ and in dioxane. Starting from two minimum energy geometries of this tripeptide, the full optimization with AM1 produced an independent guess to their structure and stability in good agreement with the molecular mechanical one.     

On the chromatic polynomial of a graph

Let P(G,λ) be the chromatic polynomial of a graph G with n vertices, independence number α and clique number ω. We show that for every λ≥n, ()^α≤≤ () ^{n −ω}. We characterize the graphs that yield the lower bound or the upper bound.?These results give new bounds on the mean colour number μ(G) of G: n− (n−ω)() ^{n −ω}≤μ(G)≤n−α() ^α. Received: December 12, 2000 / Accepted: October 18, 2001?Published online February 14, 2002     

Approximation by an iterative method of a low‐Mach model with temperature dependent viscosity

In this work, we prove the existence and the uniqueness of the strong solution of a low‐Mach model, for which the dynamic viscosity of the fluid is a given function of its temperature. The method is based on the convergence study of a sequence towards the solution, for which the rates are also given. The originality of the approach is to consider the system in terms of the temperature and the velocity, leading to a nonlinear temperature equation and the development of some specific tools and results.     

Reaction diastereoselectivity of chiral aminoalcohols/[Co(II)NO3]+ complexes in evaporating ESI nanodroplets: new insights from a joint experimental and computational investigation

The nature of the ionic species, formed by electrospray ionization (ESI) of Co(NO₃)₂/CH₃OH solutions with a pair of aminoalcohols W and Y, has been investigated by mass spectrometric and computational methods. Collision induced dissociation (CID) of ions, formally corresponding to the [WYCoNO₃]⁺ structures, yields fragmentation patterns which reflect not only the expected [WYCoNO₃]⁺ connectivity but also that of other isomeric structures. Formation of these latter species is observed only in the presence of a tertiary aminoalcohol, like N‐methylpseudoephedrine. The CID patterns are found to be strongly dependent on the chemical form (whether the free aminoalcohol or its hydrochloride), the configuration, and the relative concentration of the W and Y aminoalcohols. This variability parallels the results of classical MD (molecular dynamics) simulations of the [WYCoNO₃]⁺ adducts which show a drastic alteration of the mechanical–dynamical features of the adducts by simply changing the charge state of W and/or Y, their absolute configuration, or by removing the solvent. The present experimental and computational study confirms the observation of fast stereoselective reactions in ESI nanodroplets before their evaporation and warns against any automatic correlation between the ESI spectrum of an analyte and its structure in solution. Copyright © 2009 John Wiley & Sons, Ltd.     

Au2trien: a dinuclear gold(III) complex with unprecedented structura features

The X-ray structure of a dinuclear gold(III) complex, Au2trien, shows the presence of two square planar gold(III) centers bridged by a nitrogen donor, in a very unusual fashion.     

Rapid Classification and Recognition Method of the Species and Chemotypes of Essential Oils by ATR-FTIR Spectroscopy Coupled with Chemometrics

In the present work, the applicability of attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, coupled with chemometric tools in recognizing essential oils (EOs) for routine control, was evaluated. EOs belonging to Mentha, Cymbopogon, and Lavandula families and to S. rosmarinus and T. vulgaris species were analyzed, and the performance of several untargeted approaches, based on the synergistic combination of ATR-FTIR and Partial Least Squares Discriminant Analysis (PLS-DA), was tested to classify the species and chemotypes. Different spectra pre-processing methods were employed, and the robustness of the built models was tested by means of a Receiver Operating Characteristic (ROC) curve and random permutations test. The application of these approaches revealed fruitful results in terms of sensitivity and specificity, highlighting the potentiality of ATR-FTIR and chemometrics techniques to be used as a sensitive, cost-effective, and rapid tool to differentiate EO samples according to their species and chemotype.     

Polymerization of (E)‐1,3‐Pentadiene and (E)‐2‐methyl‐1,3‐pentadiene with neodymium catalysts: Examination of the factors that affect the stereoselectivity

(E)‐1,3‐Pentadiene (EP) and (E)‐2‐methyl‐1,3‐pentadiene (2MP) were polymerized to cis‐1,4 polymers with homogeneous and heterogeneous neodymium catalysts to examine the influence of the physical state of the catalyst on the polymerization stereoselectivity. Data on the polymerization of (E)‐1,3‐hexadiene (EH) are also reported. EP and EH gave cis‐1,4 isotactic polymers both with the homogeneous and with the heterogeneous system, whereas 2MP gave an isotactic cis‐1,4 polymer with the heterogeneous catalyst and a syndiotactic cis‐1,4 polymer, never reported earlier, with the homogeneous one. For comparison, the results obtained with the soluble CpTiCl₃‐based catalyst (Cp = cyclopentadienyl), which gives cis‐1,4 isotactic poly(2MP), are examined. A tentative interpretation is given for the mechanism of the formation of the stereoregular polymers obtained and a complete NMR characterization of the cis‐1,4‐syndiotactic poly(2MP) is reported. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3227–3232     

Understanding the role of stereoelectronic effects in determining collagen stability. 2. A quantum mechanical/molecular mechanical study of (Proline-Proline-Glycine)(n) polypeptides

The importance of vicinal and long-range interresidue effects in determining the stability of the collagen triple helix has been investigated by quantum mechanical (QM) and molecular mechanical (MM) computations on suitable model polypeptides, taking into account solvent effects by the polarizable continuum model (PCM). At the QM level, the PII conformation corresponds to an energy minimum for pentapeptide analogues incorporating the sequence Gly-Pro-Pro-Gly, irrespective of the down or up puckering of the pyrrolidine ring. However, our computations indicate that the alternation of down and up prolines characterizing collagen and collagen-like peptides is not due to an intrinsic preference of the Pro-Pro-Gly sequence. This result is confirmed by MM computations of longer polypeptides. Next, MM computations on model triple helices show that a better packing is obtained for specific values of backbone dihedrals, which, in turn, favor the alternation of down and up prolines along each chain.     

Carbon nanohorns grown from ruthenium nanoparticles

A nanoscale ruthenium/gold bimetallic cluster of clusters has been used as a molecular precursor to produce pure ruthenium nanoparticles (seeds) as catalysts for the growth of carbon nanohorns (CNHs).