Glycopolymers Made from Polyrotaxanes Terminated with Bile Acids: Preparation,Self‐Assembly,and Targeting Delivery

The use of natural compounds to construct biomaterials, including delivery system, is an attractive strategy. In the present study, through threading functional α‐cyclodextrins onto the conjugated macromolecules of poly(ethylene glycol) (PEG) and natural compound bile acid, glycopolymers of polyrotaxanes with the active targeting ability are obtained. These glycopolymers self‐assemble into micelles as evidenced by dynamic light scattering and transmission electron microscopy, in which glucosamine, as an example of targeting groups, is introduced. These micelles after loading doxorubicin (DOX) exhibit the selective recognition with cancer cells 4T1. Meanwhile, the maximal half inhibitory concentration is determined to be ≈2.5 mg L^?1 for the DOX‐loaded micelles, close to the value of free DOX·HCl (1.9 mg L^?1). The cumulative release of DOX at pH 5.5 is faster than at pH 7.4, which may be used as the controlled release system. This drug delivery system assembled by glycopolymers features high drug loading of DOX, superior biocompatibility. The strategy not only utilizes the micellization induced by bile acids, but also overcomes the major limitation of PEG such as the lack of targeting groups. In particular, this drug delivery platform can extend to grafting the other targeting groups, rendering this system more versatile.     

Iterative method for dynamic condensation combined with substructuring scheme

An iterated improved reduced system (IIRS) procedure combined with substructuring scheme for both undamped and nonclassically damped structures is presented. Iterated IIRS method is an efficient reduction technique because the highly accurate eigenproperties from the repeatedly updated condensed matrices can be obtained without consuming expensive computational cost. However, single domain direct approach of this method to large structures requires much computational resources and even makes analysis intractable in the case only limited computer storage is available. These problems can be overcome by combining the substructuring scheme with IIRS procedure. The newly developed IIRS method combined with a substructuring scheme can provide an efficient methodology for large-scale eigenvalue problems. The validation of the present method and the evaluation of computational efficiency are demonstrated through the numerical examples.     

Numerical analysis of spatial evolution of the small signal gain in a chemical oxygen–iodine laser operating without primary buffer gas

A chemical oxygen–iodine laser (COIL) that operates without primary buffer gas has become a new way of facilitating the compact integration of laser systems. To clarify the properties of spatial gain distribution, three-dimensional (3-D) computational fluid dynamics (CFD) technology was used to study the mixing and reactive flow in a COIL nozzle with an interleaving jet configuration in the supersonic section. The results show that the molecular iodine fraction in the secondary flow has a notable effect on the spatial distribution of the small signal gain. The rich iodine condition produces some negative gain regions along the jet trajectory, while the lean iodine condition slows down the development of the gain in the streamwise direction. It is also found that the new configuration of an interleaving jet helps form a reasonable gain field under appropriate operation conditions.     

A study of the thermal-induced nonlinearity of Au and Ag colloids prepared by the chemical reaction method

The nonlinear optical properties of metal Au and Ag colloidal solutions prepared by the chemical reaction method were investigated by a single beam Z-scan technique. Under CW 633 nm excitation, the Au and Ag colloidal solutions exhibited a large thermal-induced refractive index n₂. At the same time, the thermo-optic coefficients dn/dT of the Au and Ag colloidal solutions were obtained. The mechanism responsible for the process of nonlinear refraction was discussed in term of laser heating effect.     

Laboratory vacuum spectrometer for the soft x‐ray region

A laboratory surface x‐ray absorption near edge structure ((S)XANES) spectrometer used for measurements in the soft x‐ray region is described. The x‐ray beam path of the spectrometer is enclosed in a vacuum chamber directly connected to the x‐ray generator output port. With this setup, the absorption of the x‐rays in the air is avoided. The developed spectrometer uses a monochromator equipped with cylindrically bent PET(002), KAP(001), and Ge(111) crystals of different Rowland radii working in the Johann focusing geometry. Nine stepping motors are used to control the positions of the monochromator, receiving slit, sample, and detectors. An x‐ray photon energy available in experiment ranges from about 1 keV to 5 keV. A registration of the photoelectrons emitted from the sample with the channeltron is used to carry out surface‐sensitive measurements. The performance of the developed spectrometer is illustrated by spectra measured at the absorption K‐edges of several elements from the Na‐Ti set. Copyright © 2008 John Wiley & Sons, Ltd.     

Development of a highway traffic noise prediction model that considers various road surface types

A highway traffic noise prediction model has been developed for environmental assessment in South Korea. The model is based on an outdoor sound propagation method and is fully compliant with ISO 9613 and the sound power level (PWL) estimation for a road segment, as suggested in the ASJ Model-1998 that is based on PWLs. Due to that model’s selection of two pavement types, such as asphalt or concrete pavement, an unacceptable traffic noise prediction is made in cases where the road surface is different from that on which the model is based. In order to address this problem, several road surface types are categorized, and the PWL of each surface type is determined and modeled by measuring the noise levels obtained from newly developed methods. An evaluation of the traffic noise prediction model using field measurements finds good agreement between predicted and measured noise levels.     

Multilevel fast multipole algorithm for acoustic wave scattering by truncated ground with trenches

The multilevel fast multipole algorithm (MLFMA) is extended to solve for acoustic wave scattering by very large objects with three-dimensional arbitrary shapes. Although the fast multipole method as the prototype of MLFMA was introduced to acoustics early, it has not been used to study acoustic problems with millions of unknowns. In this work, the MLFMA is applied to analyze the acoustic behavior for very large truncated ground with many trenches in order to investigate the approach for mitigating gun blast noise at proving grounds. The implementation of the MLFMA is based on the Nystrom method to create matrix equations for the acoustic boundary integral equation. As the Nystrom method has a simpler mechanism in the generation of far-interaction terms, which MLFMA acts on, the resulting scheme is more efficient than those based on the method of moments and the boundary element method (BEM). For near-interaction terms, the singular or near-singular integrals are evaluated using a robust technique, which differs from that in BEM. Due to the enhanced efficiency, the MLFMA can rapidly solve acoustic wave scattering problems with more than two million unknowns on workstations without involving parallel algorithms. Numerical examples are used to demonstrate the performance of the MLFMA with report of consumed CPU time and memory usage.     

Observation of a new DsJ meson in B+-->D0D0K+ decays

We report the observation of a new DsJ meson produced in B+-->D0DsJ-->D0D0K+. This state has a mass of M=2708+/-9(-10)(+11) MeV/c2, a width Gamma=108+/-23(-31)(+36) MeV/c2 and a 1- spin-parity. The statistical significance of this observation is 8.4 sigma. The results are based on an analysis of 449 x 10(6) BB events collected at the Upsilon(4S) resonance with the Belle detector at the KEKB asymmetric-energy e+e- collider.     

NMR measurement of the magnetic field correlation function in porous media

The structure factor provides a fundamental characterization of porous and granular materials as it is the key for solid crystals via measurements of x-ray and neutron scattering. Here, we demonstrate that the structure factor of the granular and porous media can be approximated by the pair correlation function of the inhomogeneous internal magnetic field, which arises from the susceptibility difference between the pore filling liquid and the solid matrix. In-depth understanding of the internal field is likely to contribute to further development of techniques to study porous and granular media.     

Adaptive field-of-view imaging for efficient receive beamforming in medical ultrasound imaging systems

Quadrature demodulation-based phase rotation beamforming (QD-PRBF) is commonly used to support dynamic receive focusing in medical ultrasound systems. However, it is computationally demanding since it requires two demodulation filters for each receive channel. To reduce the computational requirements of QD-PRBF, we have previously developed two-stage demodulation (TSD), which reduces the number of lowpass filters by performing demodulation filtering on summation signals. However, it suffers from image quality degradation due to aliasing at lower beamforming frequencies. To improve the performance of TSD-PRBF with reduced number of beamforming points, we propose a new adaptive field-of-view (AFOV) imaging method. In AFOV imaging, the beamforming frequency is adjusted depending on displayed FOV size and the center frequency of received signals. To study its impact on image quality, simulation was conducted using Field II, phantom data were acquired from a commercial ultrasound machine, and the image quality was quantified using spatial (i.e., axial and lateral) and contrast resolution. The developed beamformer (i.e., TSD-AFOV-PRBF) with 1024 beamforming points provided comparable image resolution to QD-PRBF for typical FOV sizes (e.g., 4.6% and 1.3% degradation in contrast resolution for 160 mm and 112 mm, respectively for a 3.5 MHz transducer). Furthermore, it reduced the number of operations by 86.8% compared to QD-PRBF. These results indicate that the developed TSD-AFOV-PRBF can lower the computational requirement for receive beamforming without significant image quality degradation.