Probing buried carbon nanotubes within polymer-nanotube composite matrices by atomic force microscopy

Multi-walled carbon nanotubes (MW-CNT) inside a polyamide-6 (PA6)-MW-CNT composite were visualized by atomic force microscopy (i) in a field-assisted intermittent contact and (ii) in the tunneling (TUNA) mode. Individual buried MW-CNTs were clearly discerned within the PA6 matrix. An average diameter of 33 ± 5 nm of the MW-CNTs was determined based on field-assisted intermittent contact mode AFM images, which is consistent with the expected size of PA6-coated MW-CNTs. Single well dispersed MW-CNTs that are located in the sub-surface region of the composite were also observed in the TUNA mode. These new AFM approaches circumvent the tedious sample preparation based on ultramicrotoming required for high resolution electron microscopy studies to obtain “in-depth” morphological information and hence are expected to facilitate the analysis of CNT-based and other nanocomposites in the future.     

Catalytic combustion of chlorobenzene over V2O5/TiO2 catalysts prepared by the precipitation-deposition method

Catalytic combustion of chlorobenzene over supported vanadium oxides has been investigated. TiO₂ was prepared by the sol-gel method from titanium isopropoxide. The supported vanadium oxide catalysts have been prepared by precipitation-deposition and impregnation method and characterized by XRD, FT-Raman and TPR. In the VO_x/TiO₂catalysts prepared using the impregnation method, when vanadium loading reaches 3 wt.%, the activity shows a maximum. However, in the VO_x/TiO₂catalysts prepared by precipitation-deposition, when vanadium loading reaches 7 wt.%, the activity shows a maximum. This result suggests that the precipitation-deposition can yield a higher metal loading on the support and a high dispersion compared to the impregnation method. This revised version was published online in August 2006 with corrections to the Cover Date.     

Direct observation of an intermediate state for a surface photochemical reaction initiated by hot electron transfer

The photoinduced charge transfer that had been suggested to result in the dissociation of phenol on Ag(111) was investigated by two-photon photoemission spectroscopy. An unoccupied intermediate state was positively identified, which was found to be located 3.22 eV above the Fermi level. From the photoelectron energy dispersion, the effective mass of the intermediate state was determined to be (15 +/- 10)m(e) for a 1 ML coverage of phenol. This implies that the excited electron is localized mainly on the adsorbed phenol, forming a molecular resonance state. Polarization dependence of the photoelectron intensity suggested that the initial photoexcitation of the substrate produces hot electrons that scatter into the molecular resonance state, leading ultimately to the dissociation of the adsorbate. These results are the first two-photon photoemission study to characterize the transient anionic state involved in photodissociation of a molecule adsorbed on a metal surface.     

Determination of oxidized and reduced glutathione, by capillary zone electrophoresis, in Brassica juncea plants treated with copper and cadmium

A rapid method of capillary zone electrophoresis is described to determine the oxidized (GSSG) and reduced (GSH) form of glutathione in plant tissue. In order to separate both analytes in a fused-silica capillary, the pH and composition of the electrolyte solution were optimized. The electrolyte composition was 100 mmol/L, borate 25 mmol/L Tris, and 0.2% w/v metaphosphoric acid (MPA), pH 8.2. Some instrumental conditions used to run the samples were hydrostatic injection for 30 s, 30 kV applied voltage, and UV detection (185 nm) at 25 degrees C. Linearity and useful range obtained for the calibration curves were optimum, with correlation coefficients about 0.999 in the 0-120 micromol/L range. The migration time was highly reproducible, less than 5 min being afforded to run a sample. Electrolyte buffer and samples required a careful pH control for optimal separation of both analytes. This aspect constitutes a critical analytical step when acids are used in the procedure for sample preparation. Simultaneous analysis of GSH and GSSG may provide a useful tool for comparative studies of plants in order to select those species with a potential capacity for detoxification from toxic elements or those appearing promising from phytoremediation for these elements.     

Zirconocene-mediated route to enantiopure 9-oxabicyclononanes functionalized on both carbon bridges

[reaction: see text] A zirconocene-mediated ring contraction of 4-vinylfuranosides generated either from d-arabinose or d-glucose is followed by sequential oxidation to the ketone and alkynyl Grignard addition. The resulting cis-cyclobutanediols are subjected in turn to thermal rearrangement and intramolecular oxymercuration-demercuration. The regiochemistry of the final ring closure is controlled by the nature of R.     

An efficient preparation of novel 5-fluoropyrazolin-3-one derivatives from α-trifluoromethylated α-arylacetates

The reactions of α-trifluoromethylated α-arylacetates 1 with 3 equiv of hydrazine, methylhydrazine or benzylhydrazine in 1,4-dioxane at reflux for 24 h afforded the corresponding 5-fluoropyrazolin-3-one derivatives 3a-m in high yields. Similarly, treatment of 1 with 3 equiv of PhNLiNH₂ in THF at −78 °C, followed by warming to room temperature, resulted in the formation of 3n-s in high yields.     

The role of complexing ligands in the formation of non-aggregated nanoparticles of zirconia

The hydrolysis and condensation of zirconium n-propoxide in n-propanol have been chemically controlled via the complexation of the zirconium precursor with acetylacetone. The size of the zirconium oxide-based particles is mainly controlled by the complexation ratio x=[acac]/[Zr]. the mean size increases from nanometric to submicronic range when x decreases from 1 to 0.1. Amorphous colloidal particles are obtained at room temperature. They result from a competitive growth/termination mechanism of zirconium-oxo species in the presence of acac surface capping agents. However non-aggregated nanocrystalline particles of tetragonal zirconia, about 2 nm in diameter are formed upon aging at 60°C when hydrolysis is performed in the presence of paratoluene sulfonic acid (PTSA).     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.