Effect of short-term ethanol on the proliferative response of Swiss 3T3 cells to mitogenic growth factors

Both adaptive and deleterious responses of cells to ethanol are likely triggered by short-term interactions of the cells with ethanol. Many studies have demonstrated the direct effect of ethanol on growth factor-stimulated cell proliferation. Using Swiss 3T3 cells whose growth was inhibited by ethanol in a concentration-dependent manner, we further investigated the molecular mechanisms of acute ethanol treatment by examining its effect on EGF- and PDGF-mediated cellular signaling systems for the mitogenic function. Tyrosine autophosphorylation of the growth factor receptors was partially prevented by ethanol in intact cells. When ethanol was included before or after EGF stimulation, no effect on the receptor signaling was observed. Here we also report that ethanol inhibits activation of ERK induced by both EGF and PDGF. EGF-induced JNK activation was reduced but PDGF-induced rapid JNK activation was delayed by the addition of ethanol. The balance between its inhibitory and stimulatory effect on the signaling molecules might determine the rate of cell growth.     

Efficient light harvesting and energy transfer in organic-inorganic hybrid multichromophoric materials

Thin films of silica hybrid materials consisting of two to three covalently bound organic chromophores at different ratios were conveniently synthesized and fabricated. The photophysical properties of these materials have been studied. The fluorescence spectra reveal complete fluorescence resonance energy transfer (FRET) from donor to acceptor, and the light-harvesting ability of these hybrid materials increases with increasing the molar fraction of donor chromophore. In a three-chromophore system, the energy is transferred from 300 to 530 nm successfully. Time-resolved fluorescence experiments are employed to elucidate the average rates and efficiencies (84-97%) of energy transfer in these organic/inorganic hybrid systems. The hybrid materials have been shown to provide antenna effect to facilitate energy transfer and light harvesting.     

Interleukin-1beta stimulates matrix metalloproteinase-2 expression via a prostaglandin E2-dependent mechanism in human chondrocytes

IL-1beta is known promote cyclooxygenase-2 (COX- 2) and matrix metalloproteinase-2 (MMP-2) expression. This study focuses on the characterization of the signaling cascade associated with IL-1beta-induced matrix metalloproteinase-2 (MMP-2) regulation in human chondrocytes. The decrease in collagen levels in the conditioned media was prevented by a broad spectrum MMP inhibitor, suggesting that IL-1beta promotes the proteolytic process leading to MMP-2 activation. IL-1beta-related MMP-2 expression was found to be dependent on prostaglandin E2 (PGE2) production. In addition, the induction of COX-2 and MMP-2 was inhibited by the pretreatment of chondrocytes with a SB203580 or Ro 31-8220, indicating the involvement of protein kinase C (PKC) or p38 mitogen-activated protein kinase (MAPK). However, there is no cross-talk between PKC and p38 MAPK in the IL-1beta-induced MMP-2 activation. Taken together, these results demonstrated that IL-1beta induces MMP-2 expression through the PGE2-dependent mechanism in human chondrocytes.     

Determination of Glimepiride in Human Plasma by LC-MS-MS and Comparison of Sample Preparation Methods for Glimepiride

A sensitive and selective method for quantitation of glimepiride in human plasma was established using liquid chromatography-electrospray ionization tandem mass spectrometry. Three different methods for the sample preparation of glimepiride and an internal standard were investigated (liquid-liquid extraction, solid-phase extraction and protein precipitation). Glipizide was used as an internal standard. Compounds were separated on a C₁₈ column with 80% acetonitrile and 20% deionized water (adjusted to pH 3.5 with acetic acid), as mobile phase at a flow rate of 200 L min^–1. By use of multiple reaction monitoring mode in MS-MS with liquid-liquid extraction and solid-phase extraction, glimepiride and glipizide were detected without severe interference from the human plasma matrix. Glimepiride produced a protonated precursor ion ([M+H]⁺) at m/z 491 and a corresponding product ion at m/z 352, and the internal standard produced a protonated precursor ion ([M+H]⁺) at m/z 446 and a corresponding product ion at m/z 321. The limit of quantitation was 0.1 ng mL^–1, 0.5 ng mL^–1 and 1.0 ng mL^–1 when using liquid-liquid extraction, solid-phase extraction and protein precipitation, respectively. The validation, reproducibility, stability, and recovery of the different sample preparation methods were comparable and all the methods gave reliable results. The method has been successfully applied to pharmacokinetic study of glimepiride in human plasma.     

Styrene polymerization in ternary microemulsions: effects of water-soluble and oil-soluble initiators

The polymerization of styrene in ternary microemulsions stabilized by the cationic surfactant tetradecyltrimethylammonium bromide was studied as a function of concentrations of water-soluble (potassium persulfate, KPS) and oil-soluble (AIBN) initiators. At a particular molar ratio of the initiators, similar maximum rates of polymerization can be achieved from using both types of the initiators. In addition, both initiated systems produced microlatexes with similar hydrodynamic radius, number of polymer particles, molecular weight of polystyrene and number of polymer chain per latex particle. But the dependencies of these latex parameters on concentrations of KPS and AIBN may not be the same. The polymerization mechanism appears to be similar, irrespective of using KPS or AIBN. It is discussed in terms of effective radicals produced for the polymerization. While the different dependencies of some latex parameters on concentrations of the initiators are attributed to the different efficiencies of the initiators in producing effective radicals.     

Expedient synthesis of indoles from N-Boc arylhydrazines

The readily available N-Boc arylhydrazines undergo efficient Fischer cyclizations to provide the indoles in good yields, when reacted with enolizable ketones.     

High-performance liquid chromatographic assays for protoporphyrinogen oxidase and ferrochelatase in human leucocytes

Rapid, sensitive and specific high-performance liquid chromatographic assays are described for protoporphyrinogen oxidase and ferrochelatase in human leucocytes. The enzyme reaction products were separated and quantitated by reversed-phase high-performance liquid chromatography with fluorescence detection. The optimal pH for the protoporphyrinogen oxidase assay was 8.6 and the Michaelis constant for protoporphyrinogen IX was 9.78 +/- 0.96 microM (mean +/- S.D.). The mean (+/- S.D.) activity of protoporphyrinogen oxidase in fourteen apparently healthy subjects was 0.146 +/- 0.023 nmol protoporphyrin IX per min per mg protein. In one patient with variegate porphyria, the activity was 0.028 nmol protoporphyrin IX per min per mg protein. The optimal pH for ferrochelatase was 7.4 and with protoporphyrin and Zn2+ as substrates, the Michaelis constants were 1.49 and 8.33 microM, respectively. The mean activity of ferrochelatase in ten control subjects was 0.24 nM Zn-protoporphyrin or 2.05 nM Zn-mesoporphyrin formed per h per mg protein.     

A serpentine laminating micromixer combining splitting/recombination and advection

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.     

TR-FTIR absorption spectroscopy of transition metal carbonyl radicals generated by photodissociation of metal-metal bonds, by halogen abstraction or by radical ligand substitution

Three methods of obtaining time-resolved Fourier-Transform infrared (TR-FTIR) absorption spectra of transition metal carbonyl radicals in hexane are reported here. For the first method, CpM(CO)₂L and Cp*M(CO)₂L (M = Mo, W; L = CO, PR₃) radicals have been generated by photodissociation of the corresponding metal-metal bonded dimers. Radicals of formula M(CO)₄L (M = Mn, Re; L = CO, PR₃, AsPh₃, SbPh₃) and CpM(CO)_n (M = Fe, Mo; n = 2, 3) have been produced via the second method which is halogen abstraction of the transition metal carbonyl halides using CpMo(CO)₃ radical. For the third method, fast radical ligand substitution kinetics has been exploited to generate CpMo(CO)₂PR₃ radicals from CpMo(CO)₃ in the presence of free phosphines. An assessment of the three methods with respect to TR-FTIR spectroscopic detection of radicals was also discussed.     

Isothermal vapor–liquid equilibrium at 303.15 K and excess molar volumes at 298.15 K for the ternary system of propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane and its binary sub-systems

Isothermal vapor–liquid equilibrium data determined by the static method at 303.15 K are reported for the binary systems propyl vinyl ether + 1-propanol, 1-propanol + 2,2,4-trimethylpentane and propyl vinyl ether + 2,2,4-trimethylpentane and also for the ternary system propyl vinyl ether + 1-propanol + 2,2,4-trimethyl-pentane. Additionally, new excess volume data are reported for the same systems at 298.15 K. The experimental binary and ternary vapor–liquid equilibrium data were correlated with different G^E models and excess molar volume data were correlated with the Redlich–Kister equation for the binary systems and the Cibulka equation for the ternary system, respectively.