Protein release behavior from porous microparticle with lysozyme/hyaluronate ionic complex

Porous microparticles (PMs) with a low density (<0.4 g/cm3) for pulmonary protein delivery were prepared by the water-in-oil-in-water (W1/O/W2) multi-emulsion method using a cyclodextrin derivative as a porogen. The complexation of positively charged lysozyme (Lys) and negative-charged hyaluronate (HA) was investigated for long-term protein release from PMs. The interaction of Lys and HA not only increased protein encapsulation efficiency but also stabilized Lys against a denaturing organic solvent (dichloromethane). Furthermore, PMs with Lys/HA complexes increased the Lys release period up to 7 days, as opposed to a 4h Lys release time from PMs without Lys/HA complexes. In particular, PMs containing 10mg of HA and 50mg of Lys showed almost zero-order Lys release kinetic for 7 days and preserved the bioactivity of Lys more than 98% during its entire release period. This result suggests that PMs with Lys/HA complexes may be applied in long-term pulmonary administration of protein or peptide drugs, including those that require particles to arrive at a deep lung epithelium with the help of low density (high porosity) of PMs.     

Evaluation of pH-sensitive poly(β-amino ester)-graft-poly(ethylene glycol) and its usefulness as a pH-sensor and protein carrier

In this study, some possible biomedical applications of a pH-sensitive and amphiphilic copolymer as a pH sensor and protein delivery system are reported. PAE-g-PEG was used as a pH-sensitive polymer that can exhibit a sharp pH-dependent transition. Various fluorescent dyes including pyrene and RITC can be used to label the pH-sensitive polymer PAE-g-PEG, which was evaluated for protein encapsulation. pH-sensing was possible by observing excimer formation of the labeled pyrene via pH-dependent expansion of the polymeric chain. Also, it was confirmed that FITC-BSA could be entrapped in RITC-labeled pH-sensitive micelles of PAE-g-PEG by FRET. As a result, PAE-g-PEG can be a pH sensor and carrier for protein delivery.     

Electrophilic Addition Reaction of Ethene with Hydrogen Chloride on Cold Molecular Films: Evidence of Ethyl Cationic Intermediate

We studied the initial‐stage mechanism of the electrophilic addition reaction of ethene with HCl by examining the interactions between ethene and HCl on water‐ice and frozen molecular films at temperatures of 80–140 K. Cs⁺ reactive ion scattering (RIS) and low‐energy sputtering (LES) techniques were used to probe the reaction intermediates that were kinetically trapped on the surface, in conjunction with temperature‐programmed desorption (TPD) mass spectrometry to monitor the desorbing species. The reaction initially produced the π complex of HCl and ethene at temperatures below about 93 K and an “ethyl cationic species” at temperatures below about 100 K. The ethyl cationic species was formed via direct proton transfer from the HCl molecule to ethene with the assistance of water solvation, rather than via the interaction of hydronium ions and ethene. At high temperatures, this species dissociated into ethene and hydronium and chloride ions. The reaction did not, however, complete the final transition state on the ice surface to produce ethyl chloride. The observation gives evidence that the electrophilic addition reaction of ethene occurs through an ethyl‐like intermediate with an ionic character.     

Sheathless elasto-inertial particle focusing and continuous separation in a straight rectangular microchannel

Particle focusing in planar geometries is essentially required in order to develop cost-effective lab-on-a-chips, such as cell counting and point-of-care (POC) devices. In this study, a novel method for sheathless particle focusing, called "Elasto-Inertial Particle Focusing", was demonstrated in a straight microchannel. The particles were notably aligned along the centerline of the straight channel under a pressure-driven flow without any additional external force or apparatus after the addition of an elasticity enhancer: PEO (poly(ethylene oxide)) (～O(100) ppm). As theoretically predicted (elasticity number: El≈O(100)), multiple equilibrium positions (centerline and corners) were observed for the viscoelastic flow without inertia, whereas three-dimensional particle focusing only occurred when neither the elasticity nor the inertia was negligible. Therefore, the three-dimensional particle focusing mechanism was attributed to the synergetic combination of the elasticity and the inertia (elasticity number: El≈O(1-10)). Furthermore, from the size dependence of the elastic force upon particles, we demonstrated that a mixture of 5.9 and 2.4 μm particles was separated at the exit of the channel in viscoelastic flows. We expect that this method can contribute to develop the miniaturized flow cytometry and microdevices for cell and particle manipulation.     

Stereoselective synthesis of 2,6-trans-tetrahydropyran via primary diamine-catalyzed oxa-conjugate addition reaction of α,β-unsaturated ketone: total synthesis of psymberin

The total synthesis of psymberin was achieved employing a readily available chiral epoxide to prepare two of the three subunits in the natural product. The key reaction was a highly stereoselective organocatalytic oxa-conjugate addition reaction of α,β-unsaturated ketone catalyzed by primary diamine for the synthesis of the 2,6-trans-tetrahydropyran embedded in psymberin.     

Understanding run-in behavior of diamond-like carbon friction and preventing diamond-like carbon wear in humid air

The friction behavior of diamond-like carbon (DLC) is very sensitive to the test environment. For hydrogen-rich DLC tested in dry argon and hydrogen, there was always an induction period, so-called "run-in" period, during which the friction coefficient was high and gradually decreased before DLC showed an ultralow friction coefficient (less than 0.01) behavior. Regardless of friction coefficients and hydrogen contents, small amounts of wear were observed in dry argon, hydrogen, oxygen, and humid argon environments. Surprisingly, there were no wear or rubbing scar on DLC surfaces tested in n-pentanol vapor conditions, although the friction coefficient was relatively high among the five test environments. Ex situ X-ray photoelectron and near-edge X-ray absorption fine-structure spectroscopy analyses failed to reveal any differences in chemical composition attributable to the environment dependence of DLC friction and wear. The failure of getting chemical information of oxygenated surface species from the ex situ analysis was found to be due to facile oxidation of the DLC surface upon exposure to air. The removal or wear of this surface oxide layer is responsible for the run-in behavior of DLC. It was discovered that the alcohol vapor can also prevent the oxidized DLC surface from wear in humid air conditions.     

Identification of novel inhibitors of mitogen-activated protein kinase phosphatase-1 with structure-based virtual screening

Mitogen-activated protein kinase phosphatase-1 (MKP-1) has proved to be an attractive target for the development of therapeutics for the treatment of cancer. We report the first example for a successful application of the structure-based virtual screening to identify the novel inhibitors of MKP-1. It is shown that the efficiency of virtual screening can be enhanced significantly by the incorporation of a new solvation energy term in the scoring function. The newly found inhibitors have desirable physicochemical properties as a drug candidate and reveal a moderate potency with IC₅₀ values ranging from 20 to 50 μM. Therefore, they deserve a consideration for further development by structure–activity relationship studies to optimize the inhibitory activities. Structural features relevant to the stabilization of the inhibitors in the active site of MKP-1 are discussed in detail.     

Effects of deposition temperatures and annealing conditions on the microstructural, electrical and optical properties of polycrystalline Al-doped ZnO thin films

Al-doped ZnO (AZO, ZnO:Al₂O₃ = 98:2 wt%) films are deposited on different substrates by an RF magnetron sputtering and subsequently annealed at three different conditions to investigate the microstructural, electrical, and optical properties. X-ray diffraction and scanning electron microscope results show that all the samples are polycrystalline and the samples rapid-thermal-annealed at 900 °C in an N₂ ambient contain larger grains compared to the furnace-annealed samples. It is shown that the sample deposited at room temperature on the sapphire gives a resistivity of 5.57 × 10⁻⁴ Ω cm when furnace-annealed at 500 °C in a mixture of N₂:H₂ (9:1). It is also shown that the Hall mobility vs. carrier concentration (μ-n) relation is divided into two groups, depending on the annealing conditions, namely, either rapid-thermal annealing or furnace annealing. The relations are described in terms of either grain boundary scattering or ionized impurity scattering mechanism. In addition, the samples produce fairly high transmittance of 91-96.99% across the wavelength region of 400-1100 nm. The optical bandgaps of the samples increase with increasing carrier concentration.     

Thickness‐dependent electroforming behavior of ultra‐thin Ta2O5 resistance switching layer

Electroforming behaviours of Ta₂O₅ resistance switching memory cell with a diameter of 28 nm and different thickness (0.5–2.0 nm) of Ta₂O₅ layer have been examined. The devices showed a constant forming electric field of 0.54 V/nm regardless of Ta₂O₅ thickness. The electroforming with negative bias to top TiN electrode was ascribed to electric field‐ driven migration of oxygen vacancies, originally residing near the bottom interface, toward the top electrode interface and formation of conducting filaments. The estimated electroforming energy (0.094–0.14 eV) was favourably compared with the hopping energy of electrons from the V_O site to a nearby Ta site. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Graphene‐Assisted Room‐Temperature Synthesis of 2D Nanostructured Hybrid Electrode Materials: Dramatic Acceleration of the Formation Rate of 2D Metal Oxide Nanoplates Induced by Reduced Graphene Oxide Nanosheets

A new prompt room temperature synthetic route to 2D nanostructured metal oxide–graphene‐hybrid electrode materials can be developed by the application of colloidal reduced graphene oxide (RGO) nanosheets as an efficient reaction accelerator for the synthesis of δ‐MnO₂ 2D nanoplates. Whereas the synthesis of the 2D nanostructured δ‐MnO₂ at room temperature requires treating divalent manganese compounds with persulfate ions for at least 24 h, the addition of RGO nanosheet causes a dramatic shortening of synthesis time to 1 h, underscoring its effectiveness for the promotion of the formation of 2D nanostructured metal oxide. To the best of our knowledge, this is the first example of the accelerated synthesis of 2D nanostructured hybrid material induced by the RGO nanosheets. The observed acceleration of nanoplate formation upon the addition of RGO nanosheets is attributable to the enhancement of the oxidizing power of persulfate ions, the increase of the solubility of precursor MnCO₃, and the promoted crystal growth of δ‐MnO₂ 2D nanoplates. The resulting hybridization between RGO nanosheets and δ‐MnO₂ nanoplates is quite powerful not only in increasing the surface area of manganese oxide nanoplate but also in enhancing its electrochemical activity. Of prime importance is that the present δ‐MnO₂–RGO nanocomposites show much superior electrode performance over most of 2D nanostructured manganate systems including a similar porous assembly of RGO and layered MnO₂ nanosheets. This result underscores that the present RGO‐assisted solution‐based synthesis can provide a prompt and scalable method to produce nanostructured hybrid electrode materials.