Development and operation of fiber-based radiation protection beam-loss monitor for PAL-XFEL

Journal of Radioanalytical and Nuclear Chemistry - Beam loss monitor using a long optical fiber has been developed and operated for radiation protection in PAL-XFEL, which is an X-ray free electron...     

Electrode performance and X-ray absorption spectroscopy of La0.8Sr0.2Mn1−x Cu x O3 (0 ≤ x ≤ 0.2)–GDC composite cathodes for SOFCs

Electrochemical properties of composite cathodes consisting of La_0.8Sr_0.2Mn_1?x Cu _x O₃ (LSMCu, 0?≤?x?≤?0.2) and Ce_0.8Gd_0.2O_2?x (GDC) were determined by impedance spectroscopy, and conduction mechanism for the composite cathodes was investigated by a near-edge X-ray absorption fine-structure analysis (NEXAFS). LSMCu–GDC cathodes showed lower polarization resistance (R _p) than LSM–GDC up to 750 °C, whereas they exhibited better performance at higher temperature (≥800 °C). The best performance was achieved with the LSMCu10–GDC cathode: 0.27 and 0.08?Ω cm² at 800 °C and 850 °C, respectively. NEXAFS and refinement results confirmed that Cu doping caused the oxidation of Mn³⁺ to Mn⁴⁺ and lattice contraction. This additional Mn⁴⁺ can lead to the formation of oxygen vacancies when Mn⁴⁺ is converted to Mn³⁺ at relatively high temperatures (above 600 °C). This in turn contributes to improved oxygen ion transport in LSM. The LSMCu–GDC composite cathode can thus be considered a suitable potential cathode for SOFC applications.     

Spectroscopic Monitoring of the Acidity of Water Films on Ru(0001): Orientation‐Specific Acidity of Adsorbed Water

We examined the acid–base properties of water films adsorbed onto a Ru(0001) substrate by using surface spectroscopic methods in vacuum environments. Ammonia adsorption experiments combined with low‐energy sputtering (LES), reactive ion scattering (RIS), reflection–absorption infrared spectroscopy (RAIRS) and temperature‐programmed desorption (TPD) measurements showed that the adsorbed water is acidic enough to transfer protons to ammonia. Only the water molecules in an intact water monolayer and water clusters larger than the hexamer exhibit such acidity, whereas small clusters, a thick ice film or a partially dissociated water monolayer that contains OH, H₂O and H species are not acidic. The observations indicate the orientation‐specific acidity of adsorbed water. The acidity stems from water molecules with H‐down adsorption geometry present in the monolayer. However, the dissociation of water into H and OH on the surface does not promote but rather suppresses the proton transfer to ammonia.     

Blue Luminescence of Dendrimer‐Encapsulated Gold Nanoclusters

Direct evidence for the blue luminescence of gold nanoclusters encapsulated inside hydroxyl‐terminated polyamidoamine (PAMAM) dendrimers was provided by spectroscopic studies as well as by theoretical calculations. Steady‐state and time‐resolved spectroscopic studies showed that the luminescence of the gold nanoclusters consisted largely of two electronic transitions. Theoretical calculations indicate that the two transitions are attributed to the different sizes of the gold nanoclusters (Au₈ and Au₁₃). The luminescence of the gold nanoclusters was clearly distinguished from that of the dendrimers.     

Synthesis and surface properties of self-crosslinking core–shell acrylic copolymer emulsions containing fluorine/silicone in the shell

Stable emulsions of a core–shell acrylic copolymer (non-crosslinkable V0, and crosslinkable V2, V4, V6, and V8, where the numbers indicate the wt% of crosslinking agent based on the total acrylate monomer content) containing butyl acrylate (BA, 45 wt%), glycidyl methacrylate (GMA, 45 wt%), heptadecafluorodecyl methacrylate (PFA, 10 wt%), and various contents of crosslinking agent (vinyltriethoxysilane, VTES) were synthesized using a three-stage seeded emulsion polymerization process with a small amount of surfactant. The average particle size and viscosity of emulsions increased significantly with increasing VTES content. This study examined the effects of the VTES content on the surface/mechanical properties of self-crosslinked copolymer film samples containing a fixed acrylate monomer content to find the optimum VTES content. XPS showed that the film–air surface of the copolymer samples had a higher fluorine/silicone content than the film–dish interface. The tensile strength/modulus, thermal stability, and two Tgs (α and β Tgs) of the film samples increased significantly with increasing VTES content. The contact angle of the film samples increased with increasing VTES content up to approximately 6 wt%, and then decreased slightly. The optimum VTES content was approximately 6 wt% based on the total acrylate monomer content to obtain a high water/oil repellent coating material (V6) with the highest water/methylene iodide-contact angles (118.2°/81.8°) and lowest surface energy (18.4 mN/m).     

Expanding the chemical space: Discovery of new anticancer 3-arylbenzofuran derivatives

A new chemical space was generated via C₂-functionalization of 3-arylbenzofurans. Mannich reaction of 3-arylbenzofurans with secondary amines and formaldehyde allowed for installation of aminomethyl unit at C₂ position of benzofurans. A formyl group at C₂ site introduced as a result of Vilsmeier-Haack formylation of 3-arylbenzofurans was employed as a reacting partner for three-component Kabachnik-Fields reaction with various amines and triethyl phosphite to give a wide variety of aminomethylphosphonates. Furthermore, several benzo[d]oxazoles and pyrrolo[1,2-a]quinoxalines were prepared by using the formyl group. Biological screening of the synthesized compounds revealed that the benzofuran bearing a pyrrolo[1,2-a]quinoxaline moiety ( 5b ) most potently inhibited the viability of human blood cancer cells, but not solid tumor cells. Caspase activity assay, analysis of Annexin V-positive cells, and Western blot analysis indicated that 5b -induced death of human lymphoma U937 cells could result from its potential to induce the caspase-dependent apoptotic death of blood cancer cells with inhibition of ERK activation.     

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g⁻¹ at 0.7 A g⁻¹ and good rate capability of 34.8% at 4.9 A g⁻¹. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg⁻¹ at a power density of 490 W kg⁻¹ and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.     

Formation and Structure of Fluorescent Silver Nanoclusters at Interfacial Binding Sites Facilitating Oligomerization of DNA Hairpins

Fluorescent, DNA‐stabilized silver nanoclusters (DNA‐AgNCs) are applied in a range of applications within nanoscience and nanotechnology. However, their diverse optical properties, mechanism of formation, and aspects of their composition remain unexplored, making the rational design of nanocluster probes challenging. Herein, a synthetic procedure is described for obtaining a high yield of emissive DNA‐AgNCs with a C‐loop hairpin DNA sequence, with subsequent purification by size‐exclusion chromatography (SEC). Through a combination of optical spectroscopy, gel electrophoresis, inductively coupled plasma mass spectrometry (ICP‐MS), and small‐angle X‐ray scattering (SAXS) in conjunction with the systematic study of various DNA sequences, the low‐resolution structure and mechanism of the formation of AgNCs were investigated. Data indicate that fluorescent DNA‐AgNCs self‐assemble by a head‐to‐head binding of two DNA hairpins, bridged by a silver nanocluster, resulting in the modelling of a dimeric structure harboring an Ag₁₂ cluster.