In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

Copolymerization of ethylene and 1-butene with highly active Ticl4/THF/Mgcl2, Ticl4/THF/Mgcl2/SiO2, and TiCl3.1/3AlCl3 catalysts

Highly active catalysts for copolymerization have been prepared by the precipitation of MgCl₂/ToCl₄ complex with or without high surface area silica. Copolymerization of ethylene and 1-butene has been tested by using the prepared catalysts at various concentrations of 1-butene. The catalytic activities are 20–80 kg/g Ti h. The rate of copolymerization is strongly affected by the addition of 1-butene. The decay rate of copolymerization is first order with respect to time. Analyses of copolymers with solvent extraction, DSC, IR, XRD, and NMR were performed. Ethylene reactivity ratio (k₁₁) for TiCl₄/MgCl₂/THF catalyst is calculated to be about 26 by NMR spectrum. © 1994 John Wiley & Sons, Inc.     

Formation of nanostructured polymer filaments in nanochannels

We describe the use of hard etching methods to create nanodimensional channels and their use as templates for the formation of polymer filament arrays with precise dimensional and orientational control in a single integrated step. The procedure is general as illustrated by the radical, coordination, and photochemical polymerizations that were performed in these nanochannels. The nanochannel templates (20 nm high, 20-200 nm wide, and 100 mum long) were fabricated by the combined use of electron-beam lithography and a sacrificial metal line etching technique. Radical polymerization of acrylates, metal-catalyzed polymerization of norbornene, and photochemical polymerization of 1,4-diiodothiophene were carried out in these nanochannels. The polymers grown follow the dimensions and orientation of the channels, and the polymer filaments can be released without breaking. The approach opens up the possibility of just-in-place manufacturing and processing of patterns and devices from nanostructured polymers using well-established polymer chemistry.     

Pattern generation of biological ligands on a biodegradable poly(glycolic acid) film

The micropatterns of biological ligands (biotin and RGD peptides) were generated on a flat surface of biodegradable polymer, poly(glycolic acid) (PGA). The immobilization of biological ligands onto the surface of biodegradable polymers (especially aliphatic polyesters) is usually hampered by the absence of functionalizable groups on the polymer backbone. We demonstrate herein that PGA polymer films were modified by surface hydrolysis to introduce carboxylic acid groups on the film surfaces, which were subsequently used for patterning amine-terminated ligands by microcontact printing. Fluorescence microscopy was used to verify the pattern of biotin on the surface of the PGA films after complexation with fluorescein-conjugated streptavidin. In addition, the cellular micropatterns were obtained from micropatterns of RGD peptides on the surface-hydrolyzed PGA films.     

Methyl abstraction kinetics of CpFe(CO)2Me using the benzyl radical clock

The rate constant for the methyl abstraction reaction of CpFe(CO)₂Me has been measured with the benzyl radical clock as (1.1 ± 0.2) × 10⁵ M⁻¹ s⁻¹ at room temperature. Time-resolved Fourier-transform Infrared (FTIR) absorption spectroscopy pointed towards the formation of the CpFe(CO)₂ radical upon benzyl abstraction. The main stable product has been established by a linear scan of the reaction mixture as Cp₂Fe₂(CO)₄ produced by the dimerization of the CpFe(CO)₂ radicals. The transition state structure for the abstraction process was also found at UB3LYP/6-311+G* level of theory to contain a planar CH₃ group.     

Lithium isotope separation by chemical exchange with polymer-bound azacrown compounds

The chromatographic separation of lithium isotopes was investigated by chemical exchange with the recently synthesized polymer-bound dibenzo pyridino diamide azacrown (DBPDA) and reduced dibenzo pyridino diamide azacrown (RDBPDA). Column chromatography was employed for the determination of the effect of solvents and ligand conformation on the separation coefficients. The maximum separation coefficients, , for the DBPDA and RDBPDA at 20.0±0.02°C with acetonitrile as eluent, were found to be 0.034±0.002 and 0.035±0.002, respectively. The isotope separation coefficient and adsorption capability of the lithium ion on the DBPDA and RDBPDA were only slightly dependent on ligand structure, but strongly dependent on the solvent. DBPDA and RDBPDA appeared to have almost the same value for the isotope separation coefficient of lithium.     

Self-assembly between silver(I) and di- and tri-2-pyridines with flexible spacer: formation of discrete metallocycle versus coordination polymer

The self-assembly of metallosupramolecules from reactions of flexible 2-pyridyl ligands and silver salts is described. When 1,3-bis(2-pyridyl)propane (L1), tris[(2-pyridyl)methyl]methane (L2), and 1,3-bis(2-pyridyl)-2-tolylpropane (L3) are used in combination with silver ions, novel discrete metallocyclic complexes are formed in crystals. Moreover, the self-assembly of 1,3-bis(2-pyridyl)-2-phenylpropane (L4) with silver nitrate yields a coordination polymer. The examination of its solution shows that this coordination polymer is formed via the solution-based discrete metallocyclic species.     

Infrared-visible and visible-visible double resonance spectroscopy of 1-hydroxy-9,10-anthraquinone-(H2O)n (n=1,2) complexes

The structures of hydrated 1-hydroxyanthraquinone complexes (1-HAQ), 1-HAQ(H2O)n=1,2, with intramolecular and intermolecular hydrogen bonding interactions were studied using laser spectroscopic methods such as laser induced fluorescence, fluorescence-detected infrared, infrared-visible hole burning, and visible-visible hole burning spectroscopy. In the 1:1 complex 1-HAQ(H2O)1, the water binds to the free carbonyl group of 1-HAQ not associated with intramolecular hydrogen bond. The second water in the 1:2 complex, 1-HAQ(H2O)2, binds to the first water of the 1:1 complex rather than other hydrogen bonding sites of 1-HAQ. A pair of two geometric isomers was produced in a supersonic jet for each of the 1:1 and 1:2 complexes. Both isomers of each complex have the same vibrational spectra in the region of the OH stretching vibration of water, but have different energies for the 0-0 band of vibronic transition due to the asymmetry of the two phenyl rings in 1-HAQ. The 0-0 bands for all four species of 1-HAQ(H2O)n=1,2 were unambiguously assigned by comparing with the results of ab initio calculations, which yielded the structures, vibrational frequencies, and relative energies of the frontier molecular orbitals.     

Hydrogen peroxide oxidation of di(hydroxo)platinum(II) species in carboxylic acids

A facile procedure for synthesizing the mono(hydroxo)tris(carboxylato)platinum(IV) species has been achieved. The reaction of [Pt^II(OH)₂(dmpda)] (dmpda=2,2-dimethyl-1,3-propanediamine) with a 30% aqueous solution of H₂O₂ in the presence of a carboxylic acid produces a stable [Pt^IV(OOCR)₃(OH)(dmpda)] (R=Me, Et) complex in high yield. The crystal structures of [Pt^IV(OOCMe)₃(OH)(dmpda)] . H₂O (triclinic P1 bar, a=8.761(2) Å, b=9.245(3) Å, c=10.659(2) Å, =106.25(2)°, =93.90(2)°, =98.92(2)°, V=813.1(3) ų, Z=2, R= 0.0474) and [Pt^IV(OOCEt)₃(OH)(dmpda)] (monoclinic P2₁/c, a=12.777(4) Å, b=10.514(2) Å, c=14.971(3) Å, =107.40(2)°, V=1919.2(8) ų, Z=4, R=0.0611) show that the hydroxyl group has been selectively positioned at an axial site. The intramolecular hydrogen bond between the OH and C=O moiety exists (O(H)...=C, 2.83 Å for [Pt^IV(OOCMe)₃(OH)(dmpda)] · H₂O; 2.72 Å for [Pt^IV(OOCEt)₃(OH)(dmpda)]. Formation of the axial-mono(hydroxo)tris(carboxylato)platinum(IV) species may be ascribed to a combination of `reactive-equatorial effects' with `cis-addition' in the carboxylic acid.