Reaction of layered sodium disilicate SKS-6 with calcium chloride solution as revealed by solid state NMR spectroscopy: exploring the calcium ion extracting mechanism of SKS-6

Solid-state 1H, 29Si NMR and 23Na MQMAS NMR spectroscopy combined with X-ray powder diffraction (XRD) technique was used to study the reaction between layered sodium disilicate SKS-6 and calcium chloride solution with different concentrations. Based on the experimental results the calcium ion extracting mechanism of SKS-6 was demonstrated to be via ion replacement, during which calcium ions replace sodium ions and combine with the non-bridging oxygen in SKS-6 for charge compensation, and simultaneously sodium ions leave the interlayer. This ion-replacement process was greatly influenced by the substitution of sodium ions by protons as well as the calcium ions concentration. Increasing calcium ions concentration favors the replacement of sodium ions by calcium ions, but prevents sodium ions from being substituted by protons.     

Transflective liquid-crystal display using low-twisted vertically aligned mode

We present the design of a transflective and low-power LCD using a low-twist vertically aligned liquid crystal (LC) cell, achieved by blending a chiral additive with a patterned reflector in a single-domain configuration. Unlike the conventional single-domain transflective LCD, in which it is possible to optimize only one of the transmissive and reflective regions, the device suggests that it is possible to optimize both the transmission and reflection design to obtain favorable results in both reflective and transmissive light conditions by optimizing the chiral pitch and twist angle. From the parameter space diagram (PSD) method, which does not include the information on chiral pitch and the nonuniform LC director tilt angle, optimization focused on the transmissive region is performed. By analyzing the relation between the transmittance and the chiral pitch under the applied voltage, the optimized twist angle and chiral pitch are proposed. It is described that the optimized twist angle is also available for the reflective region by the dynamic PSD method by considering the average tilt angle under applied voltage.     

Microlens array diffuser for a light-emitting diode backlight system

Microlens array (MLA) diffusers for light-emitting diode (LED) backlight systems have been developed. A high fill-factor photoresist mold for the MLA was fabricated using three-dimensional diffuser lithography, and the patterns were transferred to a nickel master mold for UV-curable polymer replication. The fabricated microlens had various paraboloidal profiles, and its aspect ratio was controlled from 1.0 to 2.1. The MLA diffuser showed a batwing radiation pattern with a radiation angle of 150 degrees. The fabricated MLA diffuser may greatly enhance the color-mixing characteristics of LED backlight systems and help reduce the number of LEDs required.     

考虑运动受限的履带式移动机器人轨迹跟踪控制

针对履带式移动机器人的轨迹跟踪控制问题进行研究,首先,建立了履带式移动机器人的运动学模型和跟踪误差模型;其次,设计了转速有限时间控制和线速度滑模控制的轨迹跟踪控制律,并给出了考虑运动受限作用下的控制律修正表达式;最后,基于MATLAB对所提控制律进行仿真,对比分析了不考虑运动受限情况下跟踪控制效果;结果表明,设计的跟踪控制律能够实现履带式移动机器人对圆轨迹的有效跟踪,且考虑运动受限作用的控制律更加符合实际;文章研究分析了运动受限作用对于移动机器人轨迹跟踪控制的影响,分析结果对其他移动机器人的运动控制研究具有参考价值。     

磁力平衡悬梁式液体界面张力仪的研制

液体界面张力系数是液体的重要物性参数之一,实现液体界面张力系数的精确测量具有重要的应用价值,所以我们以吊环法为基础开发出一套新型液体界面张力仪,该型仪器借助杠杆原理,利用霍尔式位移传感器以及永磁/电磁复合磁悬浮技术,通过对一个单摆式悬梁悬浮状态的监测和控制,将作用于金属吊环上的拉力适度放大并反映为电磁线圈的工作电流,进而实现液体界面张力的电法精确测量.所设计的仪器结构简单、测量精确、重复性好.     

Assisted Cloning and Orthogonal Complementing of an Arbitrary Unknown Two-Qubit Entangled State

Based on A.K. Pati‘s original idea [Phys. Rev. A 61 (2000) 022308] on single-qubit-state-assisted clone, very recently Zhan has proposed two assisted quantum cloning protocols of a special class of unknown two-qubit entangled states [Phys. Lett. A 336 (2005) 317]. In this paper we further generalize Zhan‘s protocols such that an arbitrary unknown two-qubit entangled state can be treated.     

La掺杂对Bi4Ti3O12薄膜铁电性能的影响

利用Sol-Gel法在Pt/Ti/SiO2/Si衬底上制备出Bi4Ti3O12和Bi3.25La0.75Ti3O12薄膜,研究了La掺杂对Bi4Ti3O12薄膜的晶体结构、铁电性能和疲劳特性的影响,发现La掺杂没有改变Bi4Ti3O12薄膜的基本晶体结构,并且提高了Bi4Ti3O12铁电薄膜的剩余极化值和抗疲劳性能,对La掺杂改善Bi4Ti3O12铁电薄膜性能的机理进行了讨论.     

V3+:YAG晶体的生长、色心与光谱性能研究

采用石墨电阻加热的温梯法生长了V:YAG晶体,晶体的不同部位呈现两种不同的颜色:浅绿色和黄褐色.通过对比分析不同颜色V:YAG晶体的室温吸收光谱,推断出石墨发热体高温下扩散出来的C可以起到还原作用,提高晶体中V3+tetra离子的浓度,同时诱导了F心的形成.在1300℃下,对不同颜色的V:YAG晶体进行真空退火处理,发现处于八面体格位中的V3+离子在热激发作用下与近邻的四面体格位Al3+离子存在置换反应,由此产生一定浓度的四面体格位V3+离子.同时,F心在退火过程中被完全消除,释放出来的自由电子被高价态的V离子俘获,可以进一步提高晶体中四面体格位V3+离子的浓度.     

Generalized eikonal treatment of the Gouy phase shift

We use a generalized refractive index that includes diffraction effects to show that the Gouy phase shift can be seen as an intensity averaged optical path difference between the generalized eikonal and the geometrical eikonal. This approach generalizes previous treatments to include the effects of phase distortion and confirms the role of transverse spatial confinement in the Gouy shift.     

机载大气探测激光雷达人眼安全分析

 依据美国ANSI标准,模拟计算了0~12 km的高度范围内不同的激光束发散角和不同激光脉冲能量比例的532和1 064 nm激光脉冲人眼安全最大阈值能量。给出两种532和1 064 nm激光脉冲人眼安全最大阈值能量分配方案：(1)激光束发散角为0.3 mrad且532与1 064 nm的激光脉冲最大阈值能量之比为1∶2;（2）激光束发散角为0.4 mrad且532与1 064 nm的激光脉冲最大阈值能量之比为1∶1。分析了用这两种激光脉冲人眼安全最大阈值能量分配方案探测模式大气时所对应的信噪比。分析结果表明：这两种方案既能保证机载激光雷达对模式大气探测时地面人眼安全又能达到探测所要求的信噪比。