Molecular Engineering of Isomeric Benzofurocarbazole Donors for Photophysical Management of Thermally Activated Delayed Fluorescence Emitters

Benzofurocarbazole moieties are commonly used donor structures in the design of thermally activated delayed fluorescence (TADF) emitters. However, only 5 H-benzofuro[3,2-c]carbazole (34BFCz) has been reported and, to the best of our knowledge, no other benzofurocarbazole derivatives have been covered in the literature. In the present study, two further benzofurocarbazole moieties, 12 H-benzofuro[3,2-a]carbazole (12BFCz) and 7 H-benzofuro[2,3-b]carbazole (23BFCz), have been synthesized to investigate the effect of the donor structure on the photophysics and device parameters of TADF emitters. Two benzofurocarbazole-derived TADF emitters, 12-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-12 H-benzofuro[3,2-a]carbazole (o12BFCzTrz) and 7-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-7 H-benzofuro[2,3-b]carbazole (o23BFCzTrz), have been compared with 5-(2-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-5 H-benzofuro[3,2-c]carbazole (oBFCzTrz). The benzofurocarbazole donor structure governs the TADF characteristics, such as charge-transfer property and emission color. The 12BFCz donor has proved to be effective in blue-shifting the emission color, and 34BFCz has proven useful for improving the external quantum efficiency (EQE). The 12BFCz-derived o12BFCzTrz showed blue-shifted color coordinates of (0.159, 0.288), compared to (0.178, 0388) for o23BFCzTrz and (0.169, 0.341) for oBFCzTrz. The 34BFCz-derived oBFCzTrz exhibited an EQE of 22.9 %, compared to 19.2 % for o12BFCzTrz and 21.1 % for o23BFCzTrz.     

Colloidal lithographic nanopatterning via reactive ion etching

We report here a novel colloidal lithographic approach to the fabrication of nonspherical colloidal particle arrays with a long-range order by selective reactive ion etching (RIE) of multilayered spherical colloidal particles. First, layered colloidal crystals with different crystal structures (or orientations) were self-organized onto substrates. Then, during the RIE, the upper layer in the colloidal multilayer acted as a mask for the lower layer and the resulting anisotropic etching created nonspherical particle arrays and new patterns. The new patterns have shapes that are different from the original as a result of the relative shadowing of the RIE process by the top layer and the lower layers. The shape and size of the particles and patterns were dependent on the crystal orientation relative to the etchant flow, the number of colloidal layers, and the RIE conditions. The various colloidal patterns can be used as masks for two-dimensional (2-D) nanopatterns. In addition, the resulting nonspherical particles can be used as novel building blocks for colloidal photonic crystals.     

Morphology and size control of barium carbonate in ethanol–water mixed solvents

Barium carbonate (BaCO₃) particles have been obtained by the precipitation reaction of CO₂ bubbles to barium hydroxide [Ba(OH)₂] in the ethanol–water mixed solvents. Various morphologies, from rounded peanut, leaf-like, rod, and needle particles, were controlled by the precipitation step, where CO₂ gas was fed to Ba(OH)₂ in ethanol–water mixed solvent. The CO₂ gas as a carbonate source and Ba(OH)₂ slurry as a barium ion source are dissolved in the mixed solvents, within the solubility limit, to precipitate. The reactants dissolve progressively while they precipitate to BaCO₃. Ba(OH) ₂ slurry becomes translucent and opaque while the reaction proceeds. It becomes more opaque, upon which the dissolution of Ba(OH)₂ proceeds and BaCO₃ precipitates. The opaqueness of the products depends on the particle size of BaCO₃ in the product. The characteristics of BaCO₃ were confirmed by the X-ray diffraction (XRD), transmission electron microscope (TEM), and electrophoretic light scattering methods. The amount of water in the mixed solvents and of Ba(OH) ₂ in the reaction batch is related to the reaction rate in the nucleation and growing step, so that it was possible to control the shape of particles. Based on the understanding of the size and morphology of BaCO₃ in the solid/liquid–gas system, it was possible to obtain a well-dispersed average 40-nm BaCO₃ colloid.     

Sequential injection analysis system for on-line monitoring of l-cysteine concentration in biological processes

A sequential injection analysis (SIA) system was developed to monitor the concentration of l-cysteine in biological processes on-line. It is based on the redox reaction of l-cysteine with iron(III) in the presence of 1,10-phenanthroline (phen) and the detection of the red-iron(II)-phen complex with a spectrophotometry. The system was fully automated using software written in the LabVIEW™ development environment. A number of system variables such as the flow rate of the carrier buffer solution, the volume ratio of the sample to the reagents, and the reaction coil length, etc., were evaluated to increase the sensitivity and performance of the SIA system. Under partially optimized operating conditions the performance of the SIA system was linear up to a concentration of l-cysteine of 1 mM (R² = 0.998) with a detection limit of 0.005 mM and a sample frequency of 15 hr⁻¹. The SIA system was employed to monitor the concentration of l-cysteine on-line in a continuously stirred reactor and a fermentation process of Saccharomyces cerevisiae. The on-line monitored data were in good agreement with the off-line data measured by a HPLC with a fluorescence detector (n = 15, R² = 09899).     

Glucose Oxidase/Cellulose–Carbon Nanotube Composite Paper as a Biocompatible Bioelectrode for Biofuel Cells

Biofuel cells are devices for generating electrical energy directly from chemical energy of renewable biomass using biocatalysts such as enzymes. Efficient electrical communication between redox enzymes and electrodes is essential for enzymatic biofuel cells. Carbon nanotubes (CNTs) have been recognized as ideal electrode materials because of their high electrical conductivity, large surface area, and inertness. Electrodes consisting entirely of CNTs, which are known as CNT paper, have high surface areas but are typically weak in mechanical strength. In this study, cellulose (CL)–CNT composite paper was fabricated as electrodes for enzymatic biofuel cells. This composite electrode was prepared by vacuum filtration of CNTs followed by reconstitution of cellulose dissolved in ionic liquid, 1-ethyl-3-methylimidazolium acetate. Glucose oxidase (GOx), which is a redox enzyme capable of oxidizing glucose as a renewable fuel using oxygen, was immobilized on the CL–CNT composite paper. Cyclic voltammograms revealed that the GOx/CL–CNT paper electrode showed a pair of well-defined peaks, which agreed well with that of FAD/FADH_2, the redox center of GOx. This result clearly shows that the direct electron transfer (DET) between the GOx and the composite electrode was achieved. However, this DET was dependent on the type of CNTs. It was also found that the GOx immobilized on the composite electrode retained catalytic activity for the oxidation of glucose.     

Investigation on ion movement in the fringe-field switching mode depending on resistivity of alignment layer and dielectric anisotropic sign of liquid crystal

Adsorption and desorption of ions at interface between liquid crystal and alignment layer in liquid crystal displays play a crucial role in residual direct current voltage associated with image sticking. In this article, the dependency of such adsorption and desorption of ions on resistivity of alignment layer and sign of liquid crystal dielectric anisotropy in the fringe-field liquid crystal cell has been investigated. Our studies show that the time constant of ions during adsorption and desorption depends upon resistivity and dielectric constant of liquid crystal and alignment layer, and most strongly influenced by the resistivity of alignment layer such that the one with lower resistivity in two orders shows much faster adsorption and desorption at the interface than that of the one with higher resistivity.     

Morphology-Directed Selective Production of Ethylene or Ethane from CO2 on a Cu Mesopore Electrode

The electrocatalytic conversion of CO₂ to value-added hydrocarbons is receiving significant attention as a promising way to close the broken carbon-cycle. While most metal catalysts produce C₁ species, such as carbon monoxide and formate, the production of various hydrocarbons and alcohols comprising more than two carbons has been achieved using copper (Cu)-based catalysts only. Methods for producing specific C₂ reduction outcomes with high selectivity, however, are not available thus far. Herein, the morphological effect of a Cu mesopore electrode on the selective production of C₂ products, ethylene or ethane, is presented. Cu mesopore electrodes with precisely controlled pore widths and depths were prepared by using a thermal deposition process on anodized aluminum oxide. With this simple synthesis method, we demonstrated that C₂ chemical selectivity can be tuned by systematically altering the morphology. Supported by computational simulations, we proved that nanomorphology can change the local pH and, additionally, retention time of key intermediates by confining the chemicals inside the pores.     

Synthesis and characterization of copoly(arylene sulfide)s

Copolymerizations of p-dichlorobenzene (DCB)/4-bromophenyl ether (BPE), DCB/4,4′-dibromobiphenyl (DBB), and DBB/BPE pairs with sodium sulfide under high temperature (270–290°C) utilizing N-methyl-2-pyrrolidinone (NMP) as solvent were carried out to give C(DCB/BPE), C(DCB/DBB), and C(DBB/BPE) copolymers, respectively. The reactivity of dihaloaromatic monomers toward thiolate anion in the polycondensation reaction followed the order DBB > DCB > BPE. The reactivity gap between DBB and DCB toward thiolate anion seemed to be smaller than that between BPE and DCB, resulting in both high yield and high molecular weight in the C(DCB/DBB) copolymers compared to C(DCB/BPE) copolymers. The copolymerization of DBB/BPE pair with sodium sulfide, which has larger reactivity gap than the DCB/DBB or DCB/BPE pair, gave mixtures of PBS and PPSE homopolymers especially in the range of 50–80 mol % BPE in the feed. The C(DCB/DBB) and C(DCB/BPE) copolymers, however, exhibited random copolymer character in all comonomer ratios in the feed as evidenced by copolymer composition and DSC data. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2311–2317, 1999