Fabrication of a solution-processed thin-film transistor using zinc oxide nanoparticles and zinc acetate

We have fabricated a solution-processed ZnO thin-film transistor without vacuum deposition. ZnO nanoparticles were prepared by the polyol method from zinc acetate, polyvinyl pyrrolidone, and diethyleneglycol. The solution-processable semiconductor ink was prepared by dispersing the synthesized ZnO in a solvent. Inverted stagger type thin-film transistors were fabricated by spin casting the ZnO ink on the heavily doped Si wafer with 200 nm thick SiO₂, followed by evaporation of Cr/Au source and drain electrodes. After the drying and heat treatment at 600 C, a relatively dense ZnO film was obtained. The film characteristics were investigated by scanning electron microscopy (SEM) and X-ray diffraction (XRD). In order to obtain the electrical properties of the solution-derived transistor, the on–off ratio, threshold voltage, and mobility were measured.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Low C24‐OH and C22‐OH sulfatides in human renal cell carcinoma

Histopathologic diagnosis of renal cell carcinoma (RCC) may sometimes be difficult with small biopsy samples. We applied histology‐directed matrix‐assisted laser desorption/ionization mass spectrometry to RCC samples to evaluate whether and how lipid profiles are different between RCC and normal tissue. We evaluated 59 RCC samples and 24 adjacent normal tissue samples collected from patients who underwent surgery. Five peaks were significantly differently expressed (p < 10^?7) between RCCs and adjacent normal tissue samples. C24‐OH sulfatide (ST‐OH {18:1/24:0}[M‐H]^?; m/z 906.7 in the negative ion mode) and C22‐OH sulfatide (ST‐OH {18:1/22:0}[M‐H]^?; m/z 878.6 in the negative ion mode) were most significantly underexpressed in RCC samples, compared with adjacent normal tissue samples. With 100 random training‐to‐test partitions within these samples, the median prediction accuracy (RCC vs. normal) ranged from 96.3% to 100% at p cutoff values for feature selection ranging from 0.001 to 10^?7. Two oncocytoma samples were predicted as normal tissue by five lipids that were differentially expressed between RCC and normal tissue at p < 10^?7. Clear‐cell, papillary, and chromophobe RCCs were different in lipid profiles. Permutation p‐ values for 0.632+ bootstrap cross‐validated misclassification rates were less than 0.05 for all the classifiers. Thus, lipid profiles differentiate RCC from normal tissue and may possibly classify the histology of RCC. © 2014 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

Optimized precursor ion selection for labile ions in a linear ion trap mass spectrometer and its impact on quantification using selected reaction monitoring

The fragmentation of fragile ions during the application of an isolation waveform for precursor ion selection and the resulting loss of isolated ion intensity is well‐known in ion trap mass spectrometry (ITMS). To obtain adequate ion intensity in the selected reaction monitoring (SRM) of fragile precursor ions, a wider ion isolation width is required. However, the increased isolation width significantly diminishes the selectivity of the channels chosen for SRM, which is a serious problem for samples with complex matrices. The sensitive and selective quantification of many lipid molecules, including ceramides from real biological samples, using a linear ion trap mass spectrometer is also hindered by the same problem because of the ease of water loss from protonated ceramide ions. In this study, a method for the reliable quantification of ceramides using SRM with near unity precursor ion isolation has been developed for ITMS by utilizing alternative precursor ions generated by in‐source dissociation. The selected precursor ions allow the isolation of ions with unit mass width and the selective analysis of ceramides using SRM with negligible loss of sensitivity. The quantification of C18:0‐, C24:0‐ and C24:1‐ceramides using the present method shows excellent linearity over the concentration ranges from 6 to 100, 25 to 1000 and 25 to 1000 nM, respectively. The limits of detection of C18:0‐, C24:0‐ and C24:1‐ceramides were 0.25, 0.25 and 5 fmol, respectively. The developed method was successfully applied to quantify ceramides in fetal bovine serum. Copyright © 2014 John Wiley & Sons, Ltd.     

Electrode performance and X-ray absorption spectroscopy of La0.8Sr0.2Mn1−x Cu x O3 (0 ≤ x ≤ 0.2)–GDC composite cathodes for SOFCs

Electrochemical properties of composite cathodes consisting of La_0.8Sr_0.2Mn_1?x Cu _x O₃ (LSMCu, 0?≤?x?≤?0.2) and Ce_0.8Gd_0.2O_2?x (GDC) were determined by impedance spectroscopy, and conduction mechanism for the composite cathodes was investigated by a near-edge X-ray absorption fine-structure analysis (NEXAFS). LSMCu–GDC cathodes showed lower polarization resistance (R _p) than LSM–GDC up to 750 °C, whereas they exhibited better performance at higher temperature (≥800 °C). The best performance was achieved with the LSMCu10–GDC cathode: 0.27 and 0.08?Ω cm² at 800 °C and 850 °C, respectively. NEXAFS and refinement results confirmed that Cu doping caused the oxidation of Mn³⁺ to Mn⁴⁺ and lattice contraction. This additional Mn⁴⁺ can lead to the formation of oxygen vacancies when Mn⁴⁺ is converted to Mn³⁺ at relatively high temperatures (above 600 °C). This in turn contributes to improved oxygen ion transport in LSM. The LSMCu–GDC composite cathode can thus be considered a suitable potential cathode for SOFC applications.     

Luminous Butterflies: Efficient Exciton Harvesting by Benzophenone Derivatives for Full‐Color Delayed Fluorescence OLEDs

Butterfly‐shaped luminescent benzophenone derivatives with small energy gaps between their singlet and triplet excited states are used to achieve efficient full‐color delayed fluorescence. Organic light‐emitting diodes (OLEDs) with these benzophenone derivatives doped in the emissive layer can generate electroluminescence ranging from blue to orange–red and white, with maximum external quantum efficiencies of up to 14.3 %. Triplet excitons are efficiently harvested through delayed fluorescence channels.     

Blue Luminescence of Dendrimer‐Encapsulated Gold Nanoclusters

Direct evidence for the blue luminescence of gold nanoclusters encapsulated inside hydroxyl‐terminated polyamidoamine (PAMAM) dendrimers was provided by spectroscopic studies as well as by theoretical calculations. Steady‐state and time‐resolved spectroscopic studies showed that the luminescence of the gold nanoclusters consisted largely of two electronic transitions. Theoretical calculations indicate that the two transitions are attributed to the different sizes of the gold nanoclusters (Au₈ and Au₁₃). The luminescence of the gold nanoclusters was clearly distinguished from that of the dendrimers.     

Preparation and electrochemical analysis of graphene/polyaniline composites prepared by aniline polymerization

Polyaniline (PANI)/graphene nanosheet (GNS) composites were prepared by a chemical oxidation polymerization. The morphology, structure, and crystallinity of the composites were examined by scanning electron microscopy, transition electron microscopy, and X-ray diffraction. Electrochemical properties were characterized by cyclic voltammetry in 1 M H₂SO₄ electrolyte. GNS are considered as supporting materials which can provide a large number of active sites. The PANI nanofibers with diameter of 50 nm were homogeneously coated on the surface of GNS. The PANI/GNS composites exhibited a better electrochemical performance than the pure individual components. The PANI/GNS composites showed the highest specific capacitance 923 Fg^?1 at 10 mVs^?1 compared to 465 Fg^?1 for pure PANI and 99 Fg^?1 for GNS.     

CoMnO2-Decorated Polyimide-Based Carbon Fiber Electrodes for Wire-Type Asymmetric Supercapacitor Applications

In this work, we report the carbon fiber-based wire-type asymmetric supercapacitors (ASCs). The highly conductive carbon fibers were prepared by the carbonized and graphitized process using the polyimide (PI) as a carbon fiber precursor. To assemble the ASC device, the CoMnO₂-coated and Fe₂O₃-coated carbon fibers were used as the cathode and the anode materials, respectively. Herein, the nanostructured CoMnO₂ were directly deposited onto carbon fibers by a chemical oxidation route without high temperature treatment in presence of ammonium persulfate (APS) as an oxidizing agent. FE-SEM analysis confirmed that the CoMnO₂-coated carbon fiber electrode exhibited the porous hierarchical interconnected nanosheet structures, depending on the added amount of APS, and Fe₂O₃-coated carbon fiber electrode showed a uniform distribution of porous Fe₂O₃ nanorods over the surface of carbon fibers. The electrochemical properties of the CoMnO₂-coated carbon fiber with the concentration of 6 mmol APS presented the enhanced electrochemical activity, probably due to its porous morphologies and good conductivity. Further, to reduce the interfacial contact resistance as well as improve the adhesion between transition metal nanostructures and carbon fibers, the carbon fibers were pre-coated with the Ni layer as a seed layer using an electrochemical deposition method. The fabricated ASC device delivered a specific capacitance of 221 F g⁻¹ at 0.7 A g⁻¹ and good rate capability of 34.8% at 4.9 A g⁻¹. Moreover, the wire-type device displayed the superior energy density of 60.2 Wh kg⁻¹ at a power density of 490 W kg⁻¹ and excellent capacitance retention of 95% up to 3000 charge/discharge cycles.