Differentiation of herbs linked to "Chinese herb nephropathy" from the liquid chromatographic determination of aristolochic acids

A HPLC method was developed and applied to analyze aristolochic acids (AA-I and AA-II) in Chinese medicinal herbs. The herb samples were extracted by using ultrasonication with the extraction efficiency of better than 82%. Extracts were then filtered and injected onto a C18 column eluting under a gradient program using methanol and water-containing 0.5% acetic acid. The method with the detection limits of 1.33 ng for AA-I and 7.29 ng for AA-II per injection was successfully applied for the analysis of traditional Chinese medicine (TCM) and related products and differentiation of Chinese medicinal herbs that have previously been misused and caused toxicological effects. The developed protocol provided an example that analysis of selected component markers could serve for health security and quality control of TCM consumption.     

Tandem Diels-Alder cycloadditions of 2-pyrone-5-acrylates for the efficient synthesis of novel tetracyclolactones

Readily prepared from the regioselective Pd-catalyzed coupling reactions of 3,5-dibromo-2-pyrone, 3-bromo-2-pyrone-5-carboxylates undergo tandem uninterrupted sequential Diels-Alder cycloaddition reactions with allyl vinyl ethers in a highly regio- and stereoselective fashion to provide a series of novel tetracyclolactones in good yields.     

Improving the robustness of a partial least squares (PLS) model based on pure component selectivity analysis and range optimization: case study for the analysis of an etching solution containing hydrogen peroxide

Pure component selectivity analysis (PCSA) was successfully utilized to enhance the robustness of a partial least squares (PLS) model by examining the selectivity of a given component to other components. The samples used in this study were composed of NH₄OH, H₂O₂ and H₂O, a popular etchant solution in the electronic industry. Corresponding near-infrared (NIR) spectra (9000-7500 cm⁻¹) were used to build PLS models. The selective determination of H₂O₂ without influences from NH₄OH and H₂O was a key issue since its molecular structure is similar to that of H₂O and NH₄OH also has a hydroxyl functional group. The best spectral ranges for the determination of NH₄OH and H₂O₂ were found with the use of moving window PLS (MW-PLS) and corresponding selectivity was examined by pure component selectivity analysis. The PLS calibration for NH₄OH was free from interferences from the other components due to the presence of its unique NH absorption bands. Since the spectral variation from H₂O₂ was broadly overlapping and much less distinct than that from NH₄OH, the selectivity and prediction performance for the H₂O₂ calibration were sensitively varied depending on the spectral ranges and number of factors used. PCSA, based on the comparison between regression vectors from PLS and the net analyte signal (NAS), was an effective method to prevent over-fitting of the H₂O₂ calibration. A robust H₂O₂ calibration model with minimal interferences from other components was developed. PCSA should be included as a standard method in PLS calibrations where prediction error only is the usual measure of performance.     

Structural, thermal, spectroscopic, specific-heat, and magnetic studies of (C5H18N3)[Fe3(HPO3)6].3H2O: a new organically templated iron(III) phosphite with a pillared structure formed by the interpenetration of two subnets

A new open framework iron(III) phosphite with formula (C5H18N3)[Fe3(HPO3)6].3H2O has been prepared by hydrothermal synthesis with N-(2-aminoethyl)-1,3-propanediamine as a templating agent. The crystal structure was solved from single-crystal X-ray diffraction data in the trigonal space group R. The unit cell parameters are a= 8.803(1) A and c= 25.292(2) A with Z = 3. The complex pillared structure can be described as two interpenetrating subnets, one organic, [(C5H18N3).3H2O]3+, and one inorganic, [Fe3(HPO3)6]3-. In the inorganic subnet, the pillars are formed by FeO6 trimers linked by vertex sharing phosphite groups, while in the cationic subnet the organic molecules act like pillars. With increasing temperature, the flexibility of the structure allows contraction due to dehydration followed by thermal expansion before reaching the thermal stability limit. The Dq and Racah parameters calculated for (C5H18N3)[Fe3(HPO3)6].3H2O are Dq = 965, B = 1080, and C = 2472 cm(-1). M?ssbauer spectroscopy confirms the trivalent oxidation state of iron cations and the crystallographic multiplicities of their sites. The ESR spectra show isotropic signals with a g-value of 2.00(1). Specific-heat measurements show a three-dimensional (lambda-type) peak at a critical temperature Tc = 32 K. The value of the entropy at saturation is 46 J/mol K, very near the expected value of 44.7 J/mol K for the iron(III) cations with S = 5/2. Magnetic measurements indicate a three-dimensional antiferromagnetic ordering below 32 K and a reorientation of spins below 15 K with an incomplete cancellation of spins due to triangular interactions inherent to the structure.     

Synthesis and styrene polymerization properties of dinuclear half-titanocene complexes with xylene linkage

The new dinuclear half-sandwich complexes of titanium with xylene bridge, [Ti(η⁵-cyclopentadienyl)Cl₂L]₂[CH₂-C₆H₄-CH₂] (L = Cl (3), L = O-2,6-iPr₂C₆H₃ (4), L = N(SiMe₃)(2,6-Me₂C₆H₃) (5)), have been synthesized. The complexes 4 and 5 have been prepared by the reaction of the complex 3 with the corresponding lithium salts of aryloxy and anilide. Structure of these complexes has been characterized by ¹H and ¹³C NMR. The change of substituent from chloride, 3, to anilide, 5, at titanium resulted in chemical shift change of cyclopentadienyl protons from 6.92 and 6.79 to 6.13 and 5.95 ppm probably due to the positive electron density delivery from the anilide group. It was found that all three half-titanocenes were effective catalyst for the generation of SPS (syndiotactic polystyrene). Xylene bridged dinuclear catalyst (4) with aryloxy substituent exhibited very high activity (458 kg of SPS/(mol of [Ti])h), at 40 °C, whereas the analogous hexamethylene bridged dinuclear half-titanocene catalyst (7) showed a lower activity (80.7 kg of SPS/(mol of [Ti])h) under the same conditions. While the catalyst 3 was the most active catalyst among three complexes less than 40 °C the catalyst 5 exhibited the highest activity at 70 °C. Xylene linkage was suggested to be too stiff to permit any kind of intramolecular interaction between two active centers. Lack of steric disturbance due to the rigidity of the xylene bridge might give rise to the similar properties of dinuclear metallocene to the corresponding mononuclear metallocene to result in not only the facile coordination of monomer at the active center to lead high activity but also the easier β-H elimination comparing to the dinuclear catalysts with the flexible bridge to result in the formation of lower molecular weight polymer.     

Monosubstituted thermotropic ferrocenomesogens containing heterocyclic pyrazole

The synthesis and mesomorphic properties of two series of ferrocenyl derivatives, 5-[4-(4-alkoxylbenzyloxy)phenyl]-3-(4-ferrocenylphenyl)-1H-pyrazoles 1a and 3-[4-(4-ferrocenylbenzyloxy)phenyl]-5-(4-alkoxylphenyl)-1H-pyrazoles 1b are reported. Compounds 1a exhibited either nematic (N) or smectic A (SmA) phases, whereas compounds 1b formed N/SmC or SmA/SmC phases depending on the terminal carbon length. The formation of SmC phases in compounds 1b was attributed to better molecular interaction between layers since the ferrocenyl unit was remotely located one phenyl ring away from pyrazole core. In contrast, their precursors, ferrocenyl β-diketonates, were in fact non-mesogenic. A less bent shape formed by ferrocenyl pyrazoles than ferrocenyl β-diketones was believed to be responsible for the formation of observed mesophases. The crystal and molecular structure of 3-[4-(4-ferrocenylbenzyloxy)phenyl]-5-(4-hexyloxyphenyl)-1H-pyrazole (1b; n=6) was determined by means of X-ray structural analysis. It crystallizes in the triclinic space group p-1, with a=11.0725(5) Å, b=12.5514(5) Å, c=14.2085(6) Å, and Z=2. The molecular arrangement was quite consistent with the layer structure observed by powder X-ray diffractometer. The cyclic voltammogram measured for 1 and 2 (n=16) indicated that incorporation of pyrazole group hardly influenced the electrochemical behavior of the ferrocenyl moiety.     

A facile synthesis of the basic steroidal skeleton using a Pauson-Khand reaction as a key step

A high-yield synthesis of steroid-type molecules under mild reaction conditions is achieved in two steps involving nucleophilic addition of alkynyl cerium reagent to an easily enolizable carbonyl compound (beta-tetralone) followed by an intramolecular Pauson-Khand reaction.     

Synthesis of a naphthyridone p38 MAP kinase inhibitor

Compound 1 is a p38 MAP kinase inhibitor potentially useful for the treatment of rheumatoid arthritis and psoriasis. A novel six-step synthesis suitable for large-scale preparation was developed in support of a drug development program at Merck Research Laboratories. The key steps include a tandem Heck-lactamization, N-oxidation, and a highly chemoselective Grignard addition of 4-(N-tert-butylpiperidinyl)magnesium chloride to a naphthyridone N-oxide. The N-oxide exerted complete chemoselectivity via chelation in directing the Grignard addition to the alpha position as opposed to 1,4-addition on the ene-lactam. The dihydropyridyl adduct was in situ aromatized with isobutylchloroformate followed by heating in pyridine. Syntheses of Grignard precursor, N-tert-butyl-4-chloro-piperidine, were accomplished via transamination with a quaternary ammonium piperidone or via addition of methylmagnesium chloride to an iminium ion. Utilizing this chemistry, multi-kilogram preparation of compound 1 was successfully demonstrated.     

Investigation of DKP equation for spin-zero system in the presence of Gödel-type background space-time

This paper contains a discussion of a relativistic spin-0 system in the presence of a Gödel-type background space-time. The Duffin–Kemmer–Petiau (DKP) equation in the presence of a Gödel-type background space-time is studied in detail. After a derivation of the final form of this equation in the considered framework, free spin-0 particles have been studied.     

Compositional effects on fluorescence lifetime of Dy3+ ions embedded in chalcogenide Ge–As–S glasses containing very small amount of Ga and CsBr

We have investigated the fluorescence lifetimes of Dy³⁺: 1.3 μm emission in the chalcogenide Ge–As–S glasses with different compositions but identically containing 0.5 mol% Ga and 0.5 mol% CsBr. The measured lifetimes turn out to be sensitive not only to the concentrations of Ga and CsBr but also to compositional variations in the Ge–As–S host glasses. The lifetime is enhanced conspicuously in glass of the S-sufficient compositions, relative to the stoichiometric GeS₂–As₂S₃ composition, while this effect is not significant in the S-exact and S-deficient compositions. We employ Ga K-edge EXAFS analysis to support that the local structural environments of Ga in the modified chalcogenide glasses are closely correlated with the lifetime enhancement effect.