Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998     

Preparation of Water-Soluble Polymers via the Mannich Reaction

The Mannich reaction, defined as the condensation of ammonia or a primary or secondary amine with formaldehyde and a compound containing at least one hydrogen atom of pronounced activity, was first shown to yield polymers from suitably selected reactants as early as 1946 [l]. Surprisingly, very few further attempts to utilize this interesting reaction in polymer formation have been reported in the literature.     

Biomimetic alcohol oxidations by an iron(III) porphyrin complex: relevance to cytochrome P-450 catalytic oxidation and involvement of the two-state radical rebound mechanism

The systematic oxidation reactions of a wide range of alcohols have been carried out by using an iron porphyrin complex in order to understand their relation to cytochrome P-450 enzymes and to have a practical application to organic synthesis. The iron porphyrin complex catalyzed efficiently alcohol oxidation to the respective carbonyl compound via a high-valent iron-oxo porphyrin intermediate ((Porp)Fe=O+). Several mechanistic studies such as isotope 18O labeling, deuterium isotope effect, linear free energy relationship, and ring-opening of radical clock substrate, have suggested that the alcohol is oxidized by a sequence of reactions involving an alpha-hydroxyalkyl radical intermediate and oxygen rebound to form the gem-diol, dehydration of which yields the carbonyl compounds. Moreover, it has been proposed that a two-state reactivity mechanism can also be adopted for alcohol oxidation reactions in iron porphyrin model systems as exhibited by P-450 enzymes.     

Comparative Study of Ruthenium(II) and Ruthenium(III) Complexes with the Ligand dmbpy (dmbpy = 4, 4′‐Dimethyl‐2, 2′‐bipyridine)

The complex cis‐[Ru^III(dmbpy)₂Cl₂](PF₆) ( 2 ) (dmbpy = 4, 4′‐dimethyl‐2, 2′‐bipyridine) was obtained from the reaction of cis‐[Ru^II(dmbpy)₂Cl₂] ( 1 ) with ammonium cerium(IV) nitrate followed by precipitation with saturated ammonium hexafluoridophosphate. The ¹H NMR spectrum of the Ru^III complex confirms the presence of paramagnetic metal atoms, whereas that of the Ru^II complex displays diamagnetism. The ³¹P NMR spectrum of the Ru^III complex shows one signal for the phosphorus atom of the PF₆^– ion. The perspective view of each [Ru^II/III(dmbpy)₂Cl₂]^0/+ unit manifests that the ruthenium atom is in hexacoordinate arrangement with two dmbpy ligands and two chlorido ligands in cis position. As the oxidation state of the central ruthenium metal atom becomes higher, the average Ru–Cl bond length decreases whereas the Ru–N (dmbpy) bond length increases. The cis‐positioned dichloro angle in Ru^III is 1.3° wider than that in the Ru^II. The dihedral angles between pair of planar six‐membered pyridyl ring in the dmbpy ligand for the Ru^II are 4.7(5)° and 5.7(4)°. The observed inter‐planar angle between two dmbpy ligands in the Ru^II is 89.08(15)°, whereas the value for the Ru^III is 85.46(20)°.     

Azido- or hydroxyl-capped half-cubanes containing Cp*Rh fragments: [Cp*3Rh3(mu-X)3(mu3-X)]2+ (X-=OH- or N3-)

Treatment of [Cp*Rh(H(2)O)(3)](OTf)(2) (1) with Me(3)SiNH-t-Bu in acetone gave a hydroxyl-capped half-cubane [Cp*(3)Rh(3)(mu-OH)(3)(mu(3)-OH)](OTf)(3)(t-BuNH(3)) (2). Slow diffusion of Me(3)SiN(3) in diethyl ether into compound in acetone produced an azido-capped half-cubane [Cp*(3)Rh(3)(mu-N(3))(3)(mu(3)-N(3))](OTf)(2) (3). On the other hand, treating 1 with Me(3)SiN(3) in acetone gave an azido-bridged, dinuclear rhodium(III) complex [Cp*Rh(mu-N(3))(OH(2))](2)(OTf)(2) (4). Complexes 2 and 3 represent the first azido- or hydroxyl-capped, incomplete cubane-type Rh clusters. Under appropriate conditions, complexes 2 and 3 could be converted to complex 4. The structures of all products were determined by X-ray diffraction.     

Chromatographic separation and mass spectrometric identification of positional isomers of polyethylene glycol-modified growth hormone-releasing factor (1-29)

A one-step chromatographic method capable of separating all isomers of polyethylene glycol (PEG)-growth hormone-releasing factor (GRF) (1-29) conjugates was developed. The unmodified GRF (1-29) and seven different isomers of PEG-GRF (1-29) conjugates were separated by using a simple reversed-phase HPLC method depending on the differences of hydrophobicity due to the number and site of PEG attachment. The PEGylation sites of all isomers of PEG-GRF (1-29) conjugates were identified by determining the molecular masses of the Lys-C digested fragments with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. This study is a first report for the separation of all PEG-conjugate isomers and would be useful for further studies to find the promising conjugate by evaluating biological activity and stability of each isomer.     

Hydrophilic functionalization of syndiotactic polystyrene via a combination of electrophilic bromination and Suzuki–Miyaura reaction

Postfunctionalization of high‐molecular‐weight syndiotactic polystyrene (sPS) was achieved via combination of electrophilic bromination at the para‐position of the polymer aromatic ring and subsequent Suzuki–Miyaura cross‐coupling reactions with functionalized phenylboronic acids. The concentration of brominated styrene repeating unit in sPS was conveniently controlled by changing the ratio of added bromine relative to the polymer repeating unit. Brominated sPS (8.5 mol %) was converted quantitatively to other polar functional groups via Suzuki–Miyaura cross‐coupling reactions with various functional group‐substituted phenylboronic acids. The surface properties of functionalized sPS were studied by measuring water contact angles. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4335–4343, 2010     

Preparation and characterization of a poly(vinylbenzyl sulfonic acid)‐grafted FEP membrane

In this study, a novel polymer electrolyte membrane, poly(vinylbenzyl sulfonic acid)‐grafted poly(tetrafluoroethylene‐co‐hexafluoropropylene) (FEP‐g‐PVBSA), has been successfully prepared by simultaneous irradiation grafting of vinylbenzyl chloride (VBC) monomer onto a FEP film and taking subsequent chemical modification steps to modify the benzyl chloride moiety to the benzyl sulfonic acid moiety. The chemical reactions for the sulfonation were carried out via the formation of thiouronium salt with thiourea, base‐catalyzed hydrolysis for the formation of thiol, and oxidation with hydrogen peroxide. Each chemical conversion process was confirmed by FTIR, elemental analysis, and SEM‐EDX. A chemical stability study performed with Fenton's reagent (3% H₂O₂ solution containing 4 ppm of Fe²⁺) at 70 °C revealed that FEP‐g‐PVBSA has a higher chemical stability than the poly(styrene sulfonic acid)‐grafted membranes (FEP‐g‐PSSA). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 563–569, 2010