新型超导量子比特及量子物理问题的研究

近年来,超导量子计算的研究有了很大的进展.本文首先介绍了nSQUID新型超导量子比特的制备和研究进展,包括器件的平面多层膜制备工艺和量子相干性的研究.这类器件在量子态的传输速度和二维势系统的基础物理问题研究方面有着很大的优越性.其次,国际上新近发展的平面形式的transmon和Xmon超导量子比特具有更长的量子相干时间,在器件的设计和耦合方面也有相当的灵活性.本文介绍了我们和浙江大学与中国科学技术大学等单位合作逐步完善的这种形式的Xmon器件的制备工艺、制备出的多种耦合量子比特芯片,以及参与合作,在国际上首次完成的多达10个超导量子比特的量子态纠缠、线性方程组量子算法的实现和多体局域态等固体物理问题的量子模拟.最后介绍了基于这些超导量子比特器件开展的大量的量子物理、非线性物理和量子光学方面的研究,包括在Autler-Townes劈裂、电磁诱导透明、受激拉曼绝热通道、循环跃迁和关联激光等方面形成的一整套系统和独特的研究成果.     

纠缠相干态的量子隐形传态

提出利用双模纠缠相干态作为量子信道，实现纠缠相干态量子隐形传态的方案. 分别在非正交的相干态表象和另一个由相干态构成的正交态表象对双模纠缠相干态的隐形传态进行具体分析. 发现在相干态表象，虽然只要线性光学元件就可以完成隐形传态，但成功的概率小于1/2，而在正交态表象，只要能分辨4个由相干态构成的Bell态，成功的概率就是1. 关键词： 隐形传态 纠缠相干态 纠缠相干态量子信道     

用于测量材料高温动态力学性能的SHPB技术

讨论了高温下分离式Hopkinson压杆(SHPB)实验的两种方案:单独加热试样并快速对杆与同时加热试样和杆再修正温度梯度的影响。前者避免了杆被加热但是操作复杂,后者简单稳定。为了分析后者温度梯度的影响设计了一个简化模型,采用数值计算进行修正,提出了精度适当的假设,并且进行了实验验证。测量了试件和杆一起加热时杆上的温度分布,证实计算采用的温度分布是合理的。据此得到的专用于材料高温动态力学性能测试的SHPB数据处理公式简单实用,便于推广使用。     

复宗量Laguerre-Gauss光束在强非局域非线性介质中的传输

研究得到了偏离束腰入射的复宗量Laguerre-Gauss光束在强非局域非线性介质中传输的解析表达式,并且得到了其二阶矩束宽的解析解.通过例子研究了偏离束腰入射的复宗量Laguerre-Gauss光束在强非局域非线性介质中传输性质.结果表明：非(0, m)模的复宗量Laguerre-Gauss光束的光束形状随着传输而发生改变,并以Δz=πz_c为周期做周期性演化.而(0,m)模复宗量Laguerre-Gauss光束在演化过程中则形状保持不变,仅改变光束宽度;不论功率多大,在偏离束腰入射条件下总是表现为呼吸子;只有当其为束腰入射,并且入射功率等于临界功率时才能形成孤子.     

Characterization and Bioavailability of Vitamin C Nanoliposomes Prepared by Film Evaporation-Dynamic High Pressure Microfluidization

Vitamin C nanoliposomes were prepared by combining a conventional method (film evaporation) with dynamic high pressure microfluidization. Their physicochemical characterizations (antioxidant activity, particle size, entrapment efficiency, morphology, in vitro drug release, and storage stability) and skin permeation behavior were investigated. The results showed that vitamin C nanoliposomes, having equivalent DPPH (2, 2-diphenyl-1-picrylhydrazyl) free radical scavenging capacity of pure vitamin C solution without loss of their biological activity, exhibited better storage stability at 37°C for 24 hours and at 4°C for 60 days, a more excellent sustained drug release as well as higher skin penetration rate than vitamin C liposomes.     

The behavior of technetium in technetium-scrubbing stage of PUREX process

Technetium decontamination factor as a function of the acidity, flow ratio, scrubbing stage number was investigated by counter-current cascade experiments or mixer-settler batch tests. Results showed that the acidity of the scrubbing acid has little influence on the decontamination factor of technetium when the acidity was kept in the range of 4.5–6 M. The most effective method to increase the decontamination factor is to lower the feed-to-acid flow ratio. Keeping other condition same the factor increased to 10.3 from 3.1 when feed-to-acid ratio changed to 4 from 5.6. The loss of uranium and plutonium can be recovered through a re-extraction technology.     

Monte Carlo simulations of down-scattered neutron and knock-on deuteron spectra in deuterium-tritium capsule implosions

A Monte Carlo particle tracking (MCPT) code has been developed and coupled to hydrodynamic simulations to generate and track primary and scattered neutrons in addition to scattered charged particles by post-processing. This code uses one dimensional (1-D) deuterium-tritium implosion profiles, and the computed down-scattered neutron and knock-on deuteron spectra are analyzed for different areal densities. The mixing effects on the spectra of down-scattered neutron and knock-on deuteron are also investigated. The implementation of the numerical scheme is analyzed, and the particle splitting technique is adopted, which is proven to efficiently reduce computational effort.     

用光刺激放电法研究纳米粉末掺杂低密度聚乙烯中陷阱能级

通过光刺激放电(PSD)技术研究了纳米粉末掺杂低密度聚乙烯(LDPE)中的陷阱能级.利用连续扫描法得到了不同掺杂比例的Al₂O₃,MgO纳米粉末掺杂试样以及相同掺杂比例的多种纳米粉末掺杂试样的PSD电流谱,定性地得出了试样陷阱能级的深浅变化.分步扫描法定量地描述了LDPE试样在Al₂O₃纳米掺杂前后陷阱能量分布的变化.结果表明,掺杂比例大于0.2%的Al₂O₃纳米粉末掺杂、大于0.5%的MgO纳米粉末掺杂能够显著地使得LDPE陷阱能级变深.结合纳米掺杂对LDPE空间电荷注入影响的相关报道,可推测纳米掺杂对空间电荷注入的抑制与试样中陷阱能级变深存在密切的关联.     

On-line writing identical and weak fiber Bragg grating arrays

We investigate the on-line writing identical fiber Bragg grating (FBG) arrays using the phase mask technique. Given the limitation of laser power, the energy density uniformity and the horizontal width of the writing spot cannot be further optimized. The results show that the FBG arrays obtained in the optimal process (drawing speed of 12 ± 0.15 m/min and average tension of 38.2 g) have a central wavelength bandwidth of less than 0.1 nm and an average reflectivity of 0.26%. Thus, the phase mask method is a promising alternative for on-line writing identical FBG arrays.On-line writing identical and weak fiber Bragg grating arrays.