Indirect complexometric titration of potassium,rubidium, cesium,thallium and ammonium

A titrimetric method using EDTA for the determination of potassium, rubidium, cesium, thallium and ammonium has been developed. These cations are precipitated as M₂Ag[Co(NO₂)₆] and the blue cobalt thiocyanate complex in acetone-water mixed system is titrated with EDTA. Milligram quantities have been determined in the present work     

基于非生物折叠体的分子识别

利用分子自组装的方法控制大分子量的线性有机分子的构象是物理有机化学一个富于挑战性的研究课题. 近年来, 化学家已经成功利用不同的分子内非共价键作用力如氢键和疏溶剂作用等诱导线性分子的折叠乃至螺旋构象的产生. 综述了近年来这种新的非生物二级结构形式在分子识别研究中的应用.     

Mg改性对Co/γ-Al2O3-TiO2催化燃烧丙烷性能影响

采用分步浸渍法制备了系列Mg改性的Co/γ-Al_2O_3-TiO_2催化剂,通过X射线衍射(XRD)、紫外可见漫反射光谱(DR-UV-vis)、N_2吸附-脱附(BET)、X射线光电子能谱(XPS)和H_2程序升温还原(H_2-TPR)等技术对催化剂进行表征,并考察了其对丙烷燃烧的催化性能。结果表明,Co在原始γ-Al_2O_3-TiO_2载体和Mg改性MgO/γ-Al_2O_3-TiO_2载体上均以Co_3O_4的形式存在;Mg掺入后与Al_2O_3作用形成MgAl_2O_4尖晶石,改善了载体的织构性质,提升了Co_3O_4在催化剂载体表面的暴露数量和分散程度。此外,MgAl_2O_4与Co_3O_4相互作用提升了Co_3O_4颗粒表面Co~(3+)/Co~(2+)和O_(ads)/O_(latt)的比例,并削弱了Co-O键键能,从而提升了其对丙烷的催化燃烧活性。当Mg负载量为15%(质量分数)时,在Co/MgO(15%)/γ-Al_2O_3-TiO_2催化剂上进行丙烷燃烧,丙烷90%转化率的温度比无Mg掺杂的Co/γ-Al_2O_3-TiO_2催化剂的降低了45℃,并且连续反应40 h其活性保持稳定。     

Preliminary study on dual fluorescence behavior of porphyrin

It is well known that porphyrin derivatives play a key role in the primary process of photo-synthesis[1], in which porphyrins directly absorb the sunlight or indirectly acquire excitation en-ergy from light-harvesting antenna system to reach their excited state, and then donate electrons to quinone acceptors to yield a series of charge-separated species. In general, only first singlet ex-cited state of porphyrins is involved in energy transfer process[2]. However, highly excited state (S2 stat…     

（η^2—C60）[Pt（PPh3）2]8的合成与表征

C60是高度共轭的宠状结构碳素体．分子结构中六元环间的共价碳碳双键是富电子区，其反应性能与烯键类似，以碳碳双键与中心金属形成η2配位化合物．富勒烯η2配合物的合成及性能研究是当前研究热点之一[1~7]．本文在（η2-C60）［Pt（PPh3）2］n（n=1～6）系列研究[7]的基础上制备了（η2－C60）［Pt（PPh3）2］8，并用元素分析、红外光谱和光电子能谱进行鉴定和表征．1实验部分四（三苯基膦）合铂Pt（PPh3）4按文献[8]方法制备；C60纯度为99％；其余试剂均为分析纯．元素分析在ERLA－1106型元素分析仪上进行；光电子能谱在VGESCA…     

不同构象铂(Ⅱ)配合物与G-肌动蛋白作用的光谱研究

The cyclohexamethylene-diamine squaric acid platinum(Ⅱ) complexs(R,R, S,S) binding to G-actin and the consquence conformation change were studied by N-(1-pyrenyl) maleimide(NPM) labeled fluorescence and intrinsic fluorescence. The binding and chemical kinetics were determined by fluorometry. The results showed that when R (Pt/actin molar ratio) was lower than 30, the Pt binded to G-actin strong binding sites(-SH), when R was larger than 30, the Pt binded to G-actin weaker binding sites. The consquence conformation changes were determined by CD. The CD results showed that R was smaller than 60, G-actin α-helix contents decreased slowly, R was larger than 60, G-actin conformation changed obviously. The reaction of R,R complex of platinum(Ⅱ) S,S complex of platinum(Ⅱ) with G-actin was similar to that of with S,S complex of platinum(Ⅱ).     

溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的研究

采用溶胶凝胶法制氧化铝负载铜基超细粒子催化剂的制备了氧化铝负载的铜基超细粒子催化剂，用ＴＧ－ＤＴＡ，ＸＲＤ，ＢＥＴ以及ＴＥＭ等技术手段，对催化剂的物相结构，表面孔结构，粒子形貌以及催化性能等进行了研究。结果表明，利用溶胶凝胶法，可以直接帛备出高比表面积，低堆积密度的纤维状纳米级负载型Ｃｕ／Ａｌ２Ｏ３超细粒子；活性组分以远低于纳米级的微晶粒子簇状态，均匀地分散在纳米级氧化铝载体表面上，而且在低于５０     

带功能基的全氟烷基乙烯基醚的研究——3、四氟乙烯与-7,7-二氯-3-氧杂全氟庚烯-1的共聚反应及共聚物的转化

 研究了二个新的全氟烷基乙烯基醚7,7-二氯-3-氧杂全氟庚烯-1(M_0)和10,10-二氯-3,6-二氧杂全氟5-甲基癸烯-1(M₁)-与四氟乙烯(TFE)的共聚反应,聚合物的性质,并测定了TFE-M₀竞聚率。竞聚率的测定证明M₀较其它已报道的全氟烷基乙烯基醚的聚合活性都大。TFE-M₀共聚物通过化学反应可转化成相应的全氟羧酸甲酯树脂。     

一种新的判断高分子相容性的粘度判据

依据最近提出的高分子稀溶液粘度的浓度 依赖性的团簇理论 ,对高分子‘理想混合物’的定义进行了更新的理论分析 .在此基础上提出了一个新的判定高分子相容性的粘度判据 .从现有的大量实验数据看 ,该判据是和事实相符合的     

The Surface Imprinted Polystyrene Beads Prepared via Emulsion Templates

In this paper, the surface imprinted cross-linked polystyrene beads were prepared via suspension polymerization with styrene (St), divinylbezene (DVB), polyvinyl alcohol (PVA1788),the mixture of Span 85 and xylene or the mixture of Span 85 and paraffin as monomer,cross-linking agent, dispersion stabilizer and templates, respectively. The results indicate that there are dense cavities on the surface of beads, and the diameter and density of cavity are related with the composition and amount of emulsion template. The forming mechanism of cavity from thermodynamics and dynamics was proposed.