Synthesis,spectroscopic, electrochemical,DNA binding and photocleavage studies on coordination compounds of bis(4-aminophenyl)methane based novel Schiff bases

Two novel Schiff bases, 4,4′-methylenedianilidene-bis(3-methoxy-4-hydroxy-benzaldehyde) (L₁) and 4,4′-methylenedianilidene-bis(3,4-dimethoxybenzaldehyde) (L₂), have been prepared by condensing 4,4′-methylenedianiline (MDA) with vanillin and 3,4-dimethoxybenzaldehyde (DMB) respectively in ethanolic medium. Metal complexes of the above Schiff bases are prepared from salts of Cu(II), Zn(II), Co(II) and VO(IV). They are characterized by elemental analysis, molar conductivity, magnetic moment measurements, IR, ¹H NMR, UV-Vis., FAB Mass, and EPR spectra. The elemental analysis data exhibit the formation of 1: 1 [M: L] ratio. The mode of bonding and the geometry of the complexes have been confirmed on the basis of IR, UV-Vis. and magnetic moment measurements. These data reveal a square-planar geometry for all the complexes except VO(IV) which has square-pyramidal geometry. The molar conductance measurements of the Schiff base complexes reveal the existence of non-electrolytic nature. The interactions of complexes with calf thymus DNA (CT-DNA) have been investigated by electronic absorption spectroscopy, viscosity measurements and cyclic voltammetry. The results indicate that the complex can bind to DNA by intercalation modes. The Schiff bases and their metal complexes have been evaluated for their antifungal and antibacterial activities against different species of pathogenic fungi and bacteria and their results are compared with standard drugs.     

Scandium and yttrium metallocene borohydride complexes: comparisons of (BH4)1- vs. (BPh4)1- coordination and reactivity

The synthetically accessible borohydride complexes (C(5)Me(4)H)(2)Ln(THF)(BH(4)) and (C(5)Me(5))(2)Ln(THF)(BH(4)) (Ln = Sc, Y) were examined as precursors alternative to the heavily-used tetraphenylborate analogs, [(C(5)Me(4)H)(2)Ln][BPh(4)] and [(C(5)Me(5))(2)Ln][BPh(4)], employed in LnA(2)A'/M reduction reactions (A = anion; M = alkali metal) that generate "LnA(2)" reactivity and form reduced dinitrogen complexes [(C(5)R(5))(2)(THF)(x)Ln](2)(μ-η(2):η(2)-N(2)) (x = 0, 1). The crystal structures of the yttrium borohydrides, (C(5)Me(4)H)(2)Y(THF)(μ-H)(3)BH, 1, and (C(5)Me(5))(2)Y(THF)(μ-H)(2)BH(2), 2, were determined for comparison with those of the yttrium tetraphenylborates, [(C(5)Me(4)H)(2)Y][(μ-Ph)(2)BPh(2)], 3, and [(C(5)Me(5))(2)Y][(μ-Ph)(2)BPh(2)], 4. The complex (C(5)Me(4)H)(2)Sc(μ-H)(2)BH(2), 5, was synthesized and structurally characterized for comparison with (C(5)Me(5))(2)Sc(μ-H)(2)BH(2), 6, [(C(5)Me(4)H)(2)Sc][(μ-Ph)BPh(3)], 7, and [(C(5)Me(5))(2)Sc][(μ-Ph)BPh(3)], 8. Structural information was also obtained on the borohydride derivatives, (C(5)Me(4)H)(2)Sc(μ-H)(2)BC(8)H(14), 9, and (C(5)Me(5))(2)Sc(μ-H)(2)BC(8)H(14), 10, obtained from 9-borabicyclo(3.3.1)nonane (9-BBN) and (C(5)Me(4)R)(2)Sc(η(3)-C(3)H(5)), where R = H, 11; Me, 12. The preference of the metals for borohydride over tetraphenylborate binding was shown by the facile displacement of (BPh(4))(1-) in 3, 4, 7, and 8 by (BH(4))(1-) to make the respective borohydride complexes 1, 2, 5, and 6. These results are consistent with the fact that the borohydrides are not as useful as precursors in A(2)LnA'/M reductions of N(2). An unusual structural isomer of [(C(5)Me(4)H)(2)Sc](2)(μ-η(2):η(2)-N(2)), 13', was isolated from this study that shows the variations in ligand orientation that can occur in the solid state.     

A theoretical study of the 21Ag ← 11Ag two-photon transition and its vibronic band in trans-stilbene

The two-photon spectrum of the 2¹A_g ← 1¹A_g transition in trans-stilbene has been calculated at the complete active space self-consistent field (CASSCF) level of theory. Energies were obtained at the complete active space second-order perturbation (CASPT2) level of theory, while the geometries of both the initial and final states were optimized at the CASSCF level. The energy and the geometry optimizations were performed using an active space of 14 electrons in 14 active π orbitals. The vibrational frequencies of both states and the two-photon transition (TPT) cross-section were calculated with a smaller active space where the two lowest π orbitals were kept inactive. A newly implemented algorithm, in the quantum chemical package Molcas was used to determine the two-photon transition intensity. This method requires only the linear response of the CASSCF wavefunction. Furthermore, the vibronic structure of this TPT was studied. The Franck-Condon factors were obtained by calculating the overlap between the vibrational states involved, which were determined from the force fields of both the initial and final states, at the CASSCF level of theory. The results are in agreement with experiment.     

The ammonia dimer equilibrium dissociation energy: convergence to the basis set limit at the correlated level

The low-energy region of the intermolecular potential energy hypersurface (PES) of the ammonia dimer was studied at the level of second-order Moller-Plesset perturbation theory (MP2) using a very large basis set. Individual minima were located on the PES employing the counterpoise (CP) correction to account for the basis set superposition error (BSSE). Apart from these canonical MP2 calculations local MP2 (LMP2) calculations were performed. For the latter the BSSE at the correlated level is inherently absent by virtue of the local truncation of the virtual space. Results from canonical and local MP2 calculations are compared and the reliability of the LMP2 method for intermolecular complexes and clusters is discussed. The canonical MP2 calculations predicted five minimum structures, the four most stable ones lying energetically very close. For these four structures single point MP2 energy calculations with a further extended basis set (1024 functions for the ammonia dimer) were performed. The equilibrium dissociation energies so obtained are close to the one-particle basis set limit, as illustrated by a remaining BSSE of less than 0.2 kJ mol^?1. The geometry optimizations at the LMP2 level, using the three most stable canonical MP2 structures as initial geometries, all collapsed to a single minimum corresponding to an asymmetric structural arrangement. A canonical MP2 single point calculation, at that geometry, revealed that the LMP2 minimum structure is virtually as stable as the lowest minima on the canonical MP2 PES. Based on these calculations the global minimum of the ammonia dimer was assigned to a part of the PES represented by an asymmetric structure with an equilibrium dissociation energy of 13.5±0.3 kJ mol^?1     

Electrochemical supercapacitor studies of hierarchical structured Co2+-substituted SnO2 nanoparticles by a hydrothermal method

Hierarchical structured Co-doped SnO₂ nanoparticles are prepared by a low temperature hydrothermal process. The structural and surface morphologies of the SnO₂ and Sn_1?xCo_xO₂ nanoparticles are studied by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The Sn_1?xCo_xO₂ nanoparticles form with a tetragonal rutile structure during the hydrothermal process without further calcination. The pseudocapacitance behavior of the Sn_1?xCo_xO₂ nanoparticles is characterized by cyclic voltammetry (CV) in 1.0 M H₂SO₄ electrolyte. The specific capacitance (SC) is found to increase with an increase in cobalt content. A maximum SC of 840 F g^?1 is obtained for a Sn_0.96Co_0.04O₂ composite at a 10 mV s^?1 scan rate.     

Evaluation of long chain monoamide extractants for the reprocessing of U–Pu–Zr metallic fuel solution

Long chain monoamide extractants, N,N-di-decyloctanamide(DDOA), N,N-di-hexyldecanamide(DHDA), N,N-di-2-ethylhexyloctanamide(D2EHOA) and N,N-dihexyl-2-ethylhexanamide(DH2EHA) were synthesized and studied for the recovery of U(VI), Pu(IV) and Zr(IV) from a simulated dissolver solution of un-irradiated U–Zr metallic fuel. The results were compared with the results of N,N-dihexyloctanamide(DHOA) and tri-n-butylphosphate(TBP) under similar conditions. Solvent extraction studies were carried out for comparing the extraction behavior of U(VI), Pu(IV) and Zr(IV) in monoamide extractants with TBP system. The influence of length and branching of alkyl chains on either side of the amidic group on the extraction efficiency, third phase behaviour and metal ion selectivity in long chain monoamides has been discussed based on the results of above studies.

     

Silica-coated nanocomposites of magnetic nanoparticles and quantum dots

Quantum dots (QDs) and magnetic nanoparticles (MPs) are of interest for biological imaging, drug targeting, and bioconjugation because of their unique optoelectronic and magnetic properties, respectively. To provide for water solubility and biocompatibility, QDs and MPs were encapsulated within a silica shell using a reverse microemulsion synthesis. The resulting SiO2/MP-QD nanocomposite particles present a unique combination of magnetic and optical properties. Their nonporous silica shell allows them to be surface modified for bioconjugation in various biomedical applications.     

Solid state structural aspects of electrochemically prepared poly (p -phenylene) thin films – crystalline order and spherulite morphology

The electrochemical polymerization of benzene via the microemulsion approach yields highly crystalline and anisotropic “spherulitic” polyparaphenylene (PPP) thin films. The crystalline order and the origin of spherulite morphology are discussed. Received: 29 July 1997 / Accepted: 27 October 1997