Complex impure systems: Sheaves,freeways, and chains

Fundamental to the approach of Complex Impure Systems is the definition of the concept of an s‐impure set as a set of perceptual beliefs or denotative significances (relative beings) of material and/or energetic real objects (absolute beings). But any Subject not only the subject S perceives objects O as significances, and he perceives the existing relations between these significances or, alternatively, he infers them. The study of these relations, conceived not as a singular relation between singular objects, but as sheaves of relations in both directions and forming relational freeways, will be studied here. In this work, we approach the structure of the system, from a synchronous point of view, as a first approach to this class of systems. © 2016 Wiley Periodicals, Inc. Complexity 21: 387–400, 2016     

Solubility of hydrocarbons in water: Experimental measurements and modeling using a group contribution with association equation of state (GCA-EoS)

In this communication, new experimental data on the solubility of n-hexane, cyclo-hexane and iso-octane in pure water are reported. The data have been measured using a static-analytic technique that takes advantage of a Rolsi™ sampling device in the temperature range of 298–353 K and at pressures up to 0.5 MPa. The experimental data measured in this work at 298 K have been compared with some selected data from the literature and good agreement is found. A group contribution plus association equation of state, namely the GCA-EoS, is used to model the phase equilibrium of water + hydrocarbon (C₂ to n-C₆, cy-C₆, i-C₄ and i-C₈) system. The predictions of the model are found in good agreement with the experimental data measured in this work and some selected data from the literature.     

Peptide anchored Langmuir–Blodgett films of a fullerene amphiphile

A new amphiphilic derivative of fullerene C₆₀ bearing an oligoglycyl tail (C₆₀CHCOgly₂OEt, 2) formed stable Langmuir floating films at the air–water interface. This occurred when the molecular assembly was stabilized by anchoring the amphiphilic C₆₀'s to the aqueous subphase, via hydrogen bonding interactions between a dipeptide (Gly–L–Leu) dissolved in the water subphase, and the oligoglycyl chain. The compression (π−A) isotherm of the Langmuir floating film constructed in such a way showed no hysteresis, was steep, and evidenced that the monolayer collapsed at a surface pressure π65 mN m⁻¹, thus confirming that the film was tightly packed, extremely stable, and rigid. A limiting area per molecule of 89.1 Ų was extrapolated, in agreement with the calculated cross-section area of the C₆₀ fullerene. On the contrary, when the dipeptide was absent and pure water was used as the subphase, the π−A isotherm yielded a limiting area <55 Ų which indicated the formation of multiple layers; moreover it showed significant hysteresis, the film was fragile, and it collapsed at π≈50 mN m⁻¹. Once anchored by the dipeptide, the floating monolayer of 2 could be transferred onto hydrophobic quartz, glass and silicon substrates, by successive vertical dipping cycles, each cycle made up of two down-strokes and two up-strokes, to yield the Langmuir–Blodgett film. Up to 200 down- and up-strokes could be repeated reproducibly, a noteworthy result for non-covalently assembled LB films of fullerenes. The transfer ratio was 1.0, except for the second down-stroke of each cycle that gave a transfer ratio of zero, making the sequence of successful transfers: D, U, U, (cleaning and spreading), D, U, U, (cleaning and spreading), and so on (D=down-stroke, U=up-stroke). The total number of deposited layers was therefore 150. X-ray diffraction spectra were registered and exhibited a peak, which was fitted by a Montecarlo method of simulation to obtain the distribution of the repeat unit responsible for scattering; such distribution, with thickness between 20 and 60 Å, was consistent with the size of the amphiphile and the transfer sequence. The UV–Vis spectra of the LB film exhibited the characteristic C₆₀ bands, and the absorption peaks in the 200–400 nm range were proportional to the number of layers, indicating that the deposition was reproducible and that the molecular environment of C₆₀ in each layer remained constant.     

Synthesis,spectroscopic and magnetic characterization of some iron(III)-nucleotide compounds

Summary Magnetic moments and⁵⁷Fe M?ssbauer spectra at various temperatures of polycrystalline samples of some Fe^III-nucleotide compounds are described and have been characterized by u.v.-visible and fluorescence spectroscopy. Conclusions regarding the binding of iron(III) to nucleic acids are discussed.     

Determination of the acyl moieties of the antibiotic complex A40926 and their relation with the membrane lipids of the producer strain.

Structures of the fatty acid residues characterizing the various components of A40926 were determined by gas chromatography/mass spectrometry on the methyl esters obtained by methanolysis of the complex. The results confirm the residues previously assigned to Factor A (n-undecanoic acid) and B (10-methyl-undecanoic acid) and establish the residues of Factor A1 (9-methyl-decanoic acid), B1 (n-dodecanoic acid), RS1 (8-methyl-nonanoic acid), RS2 (n-decanoic acid), and RS3 (n-tridecanoic acid). As the Actinomadura species contain in their mycelia large quantities of C15-C17 fatty acid residues as membrane phospholipids, these mycelia were saponified and the fatty acids obtained were analyzed as above. There is a close correlation between the fatty acid content of A40926 complex and that of the longer homologues in the producer mycelia.     

Influence of monofunctional reactants on the physical properties of dimer acid‐based polyamides

Dimer acid‐based polyamides were synthesized by condensation polymerization in the absence and presence of monofunctional reactants. Acetic acid, oleic acid and propyl amine were used as monofunctional reactants. The influences of the equivalent percentage (E%) and type of monofunctional reactant on the physical properties of dimer acid‐based polyamides such as glass transition temperature (T_g), melting point (T_m), heat of fusion (ΔH), degree of polymerization (DP), number average molecular weight (M_n), and kinematic viscosity were investigated. The molecular weight and viscosity of dimer acid‐based polyamides decreased with the increase in equivalent percentage of monofunctional reactant. Differential scanning calorimetry (DSC) studies showed that acetic acid and propyl amine had higher effect on the thermal properties of polyamides than that of oleic acid. In the case of polyamides prepared in the presence of acetic acid, the values of T_g, T_m, and ΔH of the polyamides increased remarkably with the increase in acetic acid content. On the contrary, propyl amine had a decreasing effect on the values of T_g, T_m, and ΔH of the polyamides. Incorporation of oleic acid into the polymer structure had no significant effect on the values of T_g and T_m of the dimer acid‐based polyamides. Copyright © 2006 John Wiley & Sons, Ltd.     

Mass spectrometry of heterocyclic compounds. XV—The mechanism of the fragmentation under electron impact of 3-p-NH2-phenyl-5-phenyl-1,2,4-oxadiazole. A CNDO/2 treatment

Molecular orbital calculations using the semi-empirical CNDO/2 method were carried out on the molecular ion of 3-p-NH₂-phenyl-5-phenyl-1,2,4-oxadiazole, whose structure had been determined by X-ray diffraction. The calculated diatomic interaction energy values are consistent with the mechanistic proposals made previously in terms of the quasi-equilibrium theory concerning the cleavage of the heterocycle ring after electron impact.     

Heck reaction catalyzed by Pd/C, in a triphasic-organic/Aliquat 336/aqueous-solvent system

The rate of the Pd/C catalyzed Heck coupling of Ar-I with CH(2)=CH-R is accelerated tenfold by the presence of Aliquat 336 (A336), a well known phase transfer catalyst, and an ionic liquid. Both when conducted in A336 as solvent, and in an isooctane/A336/aqueous triphasic mixture, the Heck reaction of aryl iodides with electron deficient olefins, catalyzed by Pd/C, proceeds with high yields and selectivity. When KOH is used instead of Et(3)N, selective formation of the biphenyl rather than the Heck product, is observed. Aryl bromides react more sluggishly, and only the more activated ones undergo the Heck reaction. In the absence of the olefin, aryl halides possessing an electron withdrawing group are reduced to the corresponding Ar-H.     

Design and synthesis of novel 1,4-benzodiazepine surrogates as potential CCKA and CCKB antagonists via palladium-catalyzed three-component cascade reactions

Structurally diverse novel 1,4-benzodiazepine analogues related to selective CCKA antagonist MK-329, and CCKB antagonists L-365,260 and YM022 are prepared via palladium-catalyzed three component domino reactions involving allenylation-carbonylation-anion capture in one-pot cascade protocol in good to excellent yields.