Intramolecularly hydrogen-bonded 3-phenacyl-lH-pyrido[3,4-b]-pyrazin-2-one and 2-Phenacyl-4H-pyrido[3,4-b]pyrazin-3-one

Twelve phenacyl derivatives of 1H-pyrido[3,4-b]pyrazin-2-ones and 4H-pyrido[3,4-b]pyrazin-3-ones have been synthesized. In these compounds, C = N double bonds at the 3 and 4 positions in the former compounds and those at the 1 and 2 positions in the latter compounds migrate onto the side chains to form phenacyli-dene structures. These migrations are facilitated by chelation between side chain carbonyl and the proton attached to the ring nitrogen atom which was generated by the migration. All the hydrogen-bonded structures appear to be stable as shown by their ir spectra in the crystalline state, and by their ¹H nmr spectra in solution.     

Characterization of molecular transport in poly(dimethylsiloxane) microchannels for electrophoresis fabricated with synchrotron radiation-lithography and UV-photolithography

In the present paper, a study was undertaken of molecular transport in ploy(dimethylsiloxane) microchannels that were fabricated by ultraviolet (UV)-photolithography and synchrotron radiation (SR)-lithography characterized and compared for microchip capillary electrophoresis by evaluating in-channel molecular dispersion. A fluorescent tag, sulforhodamine B was used as the probing molecule. It was found that microchannels made by SR-lithography fabrication were superior to those made by UV-photolithography fabrication in terms of molecular transport performance. A deep insight into surface conditions characterized by scanning electron microscopy suggested it was related to the difference in surface roughness. Chromatographic retention in electropherograms further supported such a conclusion, which depended on the phase ratio of the channel surface. The results revealed for PDMS microchannels in this work were in good agreement with the phenomenon found for glass microchannels in the literature.     

Distribution and behavior of long-lived radioiodine in soil

The concentration of¹²⁹I in soil in Japan was determined by neutron activation analysis. For the activation analysis, pre-irradiation chemical separation of the iodine was carried out by acid decomposition and distillation and post-irradiation treatment was performed by ion exchange and solvent extraction. The concentration of stable iodine and¹³⁷Cs were also determined and compared with the behavior of¹²⁹I in soil.Soil samples from Ibaraki, Fukui, Fukushima, and Nagasaki Prefectures were analyzed and¹²⁹I was detected in amounts ranging from 10^–7 to 10^–5 Bq/g soil in uncultivated surface soil. There are apparently small variations in the¹²⁹I concentrations in each of the regions analyzed.From depth profile studies in sandy soil, the iodide form of¹²⁹I was found to migrate downward at a relatively rapid rate while other species remain longer in the surface soil.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

Unambiguously confirmed structure of 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one

To determine the structures of two isomeric products, 2-phenacylidene-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (2) and 3-phenacylidene-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (3) obtained by condensation of 2,3-diaminopyridine (1) with ethyl benzoylpyruvate [1–3], these compounds were hydrolyzed to give 2-methyl-4H-pyrido[2,3-b]pyrazin-3-one (4) and 3-methyl-1H-pyrido[2,3-b]pyrazin-2-one (5) , respectively [4,5]. Both hydrolysates 4 and 5 were hydrogenated to afford 2-methyl-1,2-dihydro-4H-pyrido[2,3-b]pyrazin-3-one (6) and 3-methyl-3,4-dihydro-1H-pyrido[2,3-b]pyrazin-2-one (7) . The latter compound was identical with an unequivocally synthesized compound providing proof for the structures of all these compounds.     

Biosorption of chromium(VI) and arsenic(V) onto methylated yeast biomass

Yeast biomass was methylated in a 0.1 M HCl methyl alcohol solution at room temperature and the methylated yeast (MeYE) was applied to the adsorptive separation of Cr(VI) and As(V) anions from aqueous solutions. At near-neutral pH, while Cr(VI) and As(V) anions were scarcely adsorbed onto unmethylated yeast biomass, the amounts adsorbed increased with increasing methylation degree. The amount of Cr(VI) adsorbed onto MeYE was almost constant at pH 4-6 and decreased with increasing pH above pH 6. The amount of As(V) adsorbed onto MeYE was rather lower than that of Cr(VI) and it had a peak at about pH 7. A metal-binding model was used to describe the adsorption characteristics of Cr(VI) and As(V) on MeYE. The results showed that MeYE has two different types of adsorption sites. The saturated amount of Cr(VI) and As(V) adsorbed onto MeYE having methylation degree 0.94 was 0.55 mmol g(-1).     

Integration of gene amplification and capillary gel electrophoresis on a polydimethylsiloxane-glass hybrid microchip

We report on the development of a hybrid polydimethylsiloxane (PDMS)-glass microchip for genetic analysis by functional integration of polymerase chain reaction (PCR) and capillary gel electrophoresis (CGE), and on related temperature control systems for PCR on a PDMS-glass hybrid microchip. The microchip was produced by molding PDMS against a microfabricated master with comparatively simple and inexpensive methods. PCR was successfully carried out on the PDMS-glass hybrid microchip with 500 bp target of lambdaDNA and the amplified gene was subsequently analyzed by CGE on the same PDMS-glass microchip. The chip could be considered as an inexpensive single-use apparatus compared to glass or silicon-made microchips for the same purpose.     

Acid-catalyzed photoreaction of 6-chloro-1,3-dimethyluracil and mesitylene: formation of photocycloadducts and their characterization

In contrast to the previously reported short time required (1 h) for photolysis of 6-chloro-1,3-dimethyluracil (6-CIDMU) and mesitylene, in the presence of TFA, resulting in two major products: 1,3,6,8,10-pentamethylcyclooctapyrimidine derivative (1d), and diazapentacyclo[6.4.0.0(1,3).0(2,5).0(4,8)]dodecane (2c), prolonged irradiation (18h) of this same mixture yields novel pentalenopyrimidine derivatives, including diazapentacyclo[6.4.0.0(1,3).0(2,6).0(4,8)]dodecane (3c).     

Calorimetric study of the glassy state XII. Plural glass-transition phenomena of ethanol

Ethanol was found to give a metastable crystalline phase (crystal-II) when the liquid was cooled at a moderate rate. Glassy states of liquid and of newly found crystal-II were obtained in the calorimeter cell by controlling the cooling rate of the liquid. The heat capacities of these phases as well as that of the stable crystal-I were measured by an adiabatic calorimeter in the temperature range between 14 and 300 K. The glass transition temperature T_g, the heat-capacity jump at T_g, and the residual entropy were found to be 97 K, 35.3 J K^?1 mol^?1, and 8.93 J K^?1 mol^?1 for the glassy liquid, and 97 K, 22.8 J K^?1 mol^?1, and 4.24 J K^?1 mol^?1 for the glassy crystal-II, respectively. The values for the residual entropy are referred to the third-law entropy for crystal-I.The heat capacities reported previously for the supercooled liquid by Gibson et al. and by Parks and Kelley agree well with those for the metastable crystal-II. Those of the supercooled liquid connect smoothly with those obtained for the liquid above the melting temperature. Thus, ethanol is found to be another example of a low-molecular-weight compound which shows multiple glass-transition phenomena.