Preparation of soluble and fusible poly(2,5-dimethoxy-1,4-phenylene)

Poly(2,5-dimethoxy-1,4-phenylene) was prepared by oxidative polymerization of p-dimethoxybenzene with aluminum chloride and copper(II) chloride in nitrobenzene under reduced pressure. The polymers obtained were soluble in sulfuric acid and fusible at 320°C. The intrinsic viscosity of the polymer was ca. 0.07 in sulfuric acid. Demethylation of methoxy groups did not occur during the polymerization.     

An anomalous emission excited near the absorption edge of pyrene crystals

Emission spectra and decay times of the fluorescence excited at the absorption edge region in pyrene crystals were measured. At liquid nitrogen temperature, the fluorescence under the excitation at 390 nm is considered as the excimer emission and its band peak shifts a little to the short wavelength in comparison with that of the excimer emission under the excitation at 360 nm. The emission decay times under the excitation at the 390 nm and 360 nm are about 155 ns and 180 ns, respectively, at liquid nitrogen temperature. The former decay time changes its value abruptly near 127 K. This abrupt change of the decay time may be due to the phase transition in pyrene crystals.     

Photochemical ligation of DNA conjugates through anthracene cyclodimer formation and its fidelity to the template sequences

Anthracene readily forms photoadducts, anthracene dimers, and this photodimerization reaction has been well characterized. In general, however, the reaction requires close proximity and certain spatial alignment of both reaction partners. DNA could provide an ideal scaffold for accelerating the photocyclic addition. We synthesized a number of anthracene-DNA conjugates. The sequences of the conjugates, 5'AntODNn and 3'AntODNn (the length of methylene linkers: n = 3 or 6), were designed to bind adjacent sequences of the template with the anthracene units directed such that they stacked with each other. The conjugates were only dimerized in the presence of the template by light irradiation. The efficiency was affected by one-base displacement in the template sequence.     

Group-velocity-matched cascaded quadratic nonlinearities of femtosecond pulses in periodically poled MgO:LiNbO3

Large nonlinear phase shifts were generated with femtosecond pulses at 1560 nm through cascaded quadratic interactions in periodically poled MgO-doped LiNbO3. The off-diagonal component of the nonlinear coefficient was utilized for simultaneous quasi phase matching and group-velocity matching. The effective nonlinear refractive index was varied from -2.9 x 10(-14) to +3.3 x 10(-14) cm2/W by tuning the phase-mismatch conditions.     

Synthesis of block and end‐functionalized polyesters by triflimide‐catalyzed ring‐opening polymerization of ε‐caprolactone, 1,5‐dioxepan‐2‐one,and rac‐lactide

The ring‐opening polymerization (ROP) of cyclic esters, such as ε‐caprolactone, 1,5‐dioxepan‐2‐one, and racemic lactide using the combination of 3‐phenyl‐1‐propanol as the initiator and triflimide (HNTf₂) as the catalyst at room temperature with the [monomer]₀/[initiator]₀ ratio of 50/1 was investigated. The polymerizations homogeneously proceeded to afford poly(ε‐caprolactone) (PCL), poly(1,5‐dioxepan‐2‐one) (PDXO), and polylactide (PLA) with controlled molecular weights and narrow polydispersity indices. The molecular weight determined from an ¹H NMR analysis (PCL, M_n,NMR = 5380; PDXO, M_n,NMR = 5820; PLA, M_n,NMR = 6490) showed good agreement with the calculated values. The ¹H NMR and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry analyses strongly indicated that the obtained compounds were the desired polyesters. The kinetic measurements confirmed the controlled/living nature for the HNTf₂‐catalyzed ROP of cyclic esters. A series of functional alcohols, such as propargyl alcohol, 6‐azido‐1‐hexanol, N‐(2‐hydroxyethyl)maleimide, 5‐hexen‐1‐ol, and 2‐hydroxyethyl methacrylate, successfully produced end‐functionalized polyesters. In addition, poly(ethylene glycol)‐block‐polyester, poly(δ‐valerolactone)‐block‐poly(ε‐caprolactone), and poly(ε‐caprolactone)‐block‐polylactide were synthesized using the HNTf₂‐catalyzed ROP. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2455–2463     

Birefringence simulation of annealed ingot of magnesium fluoride single crystal

We developed a method for simulating birefringence of an annealed ingot of MgF₂ single crystal for lithography optics. This method provides the optical path difference caused by crystal symmetry and residual stress existing in the crystal. The method consists of the heat conduction analysis, the residual stress analysis and the birefringence analysis. Because there exists no experimental data on the inelastic behavior of MgF₂ single crystal, the residual stress was estimated with the elastic thermal stress analysis using the finite element method by assuming a stress-free temperature. In this analysis, the temperature dependence of material properties and crystal anisotropy were taken into account. In the birefringence analysis, the distributions of optical path difference were calculated by an approximate method using the result of the residual stress analysis. This approximate method uses the average stress along the wave normal and is equivalent to the exact method in case of low stress dealt with the present study. In this analysis, it is possible to consider both the intrinsic birefringence and the stress birefringence in any crystal orientation. The distribution of the optical path difference in the annealed ingot obtained from the present calculation agrees qualitatively with that of the experiment. Its calculated value also agrees reasonably well with that of the experiment, when a stress-free temperature is adequately selected.     

Bose-Einstein correlations for pions produced inp p collisions at 360 GeV/c

Zeitschrift für Physik C Particles and Fields - Correlations among identically charged pions were measured for pions produced inp p collisions at 360 GeV/c using the EHS spectrometer. The...