Radiation-induced emission from golden hamster embryo cells

Emission from high-energy-electron-irradiated golden hamster embryo (GHE) cells has been studied over the temperature range 12–300 K both by a one-shot-single-photon-counting method and by photocurrent measurements with an oscilloscope. Emission from the irradiated phosphate buffered saline (PBS) also has been studied. The emission spectra from PBS at 12 and 77 K show a maximum around 330 and 380 nm, respectively, which are the same spectra as those from irradiated pure H₂O. The emission from irradiated GHE consists of the new band at 480 nm in addition to the emission from H₂O. The 480 nm emission is observed at the temperature range of 12–300 K, though the emission at 300 K is much lower than that at low temperature. The 480 nm emission is ascribed to the transition from excited organic substances in GHE cells. The intensity of 480 nm emission at 300 K increases linearly with increasing irradiation-dose in the range of 11–600 Gy.     

Addition reactions of pendant epoxide group in poly(glycidyl methacrylate) with various active esters

Addition reactions of pendant epoxide groups in poly(glycidyl methacrylate) (PGMA) with various active esters such as 1-benzotriazolyl benzoate, S-(2-benzoxazolyl) thiobenzoate, S-(2-benzothiazolyl) thiobenzoate, 4-nitrophenyl benzoate (4NPB), and S-phenyl thiobenzoate (PTB) were carried out using quaternary salts as catalysts. The reactions of PGMA with those active esters proceeded in diglyme at 100°C for 24 h quantitatively without the formation of 2-hydroxyl pendant groups in the polymer when 10 mol % of tetraethylammonium bromide was used as a catalyst. Furthermore, it was found that the respective quaternary salts have higher catalytic activity than tertiary amines in the reaction of PGMA with the active esters, and the reaction of PGMA with 4NPB gave the corresponding polymer with the highest conversion by addition of tetrabutylammonium bromide as a catalyst, while tetraethylammonium chloride showed the highest activity for the reaction of PGMA with PTB. In addition, the rate of reaction of PGMA with 4NPB was proportional to third order kinetics of the epoxide concentration, the ester concentration and the catalyst concentration as follows: ?d[Epoxide]/dt = ?[Ester]/dt = k₃[Epoxide] [Ester] [Catalyst].     

Cation-pi interactions of a thiocarbonyl group and a carbonyl group with a pyridinium nucleus

Attractive interactions between a thiocarbonyl group and a pyridinium nucleus, and between a carbonyl group and a pyridinium nucleus have been proven by (1)H and (13)C NMR studies, UV-vis spectral analyses, and X-ray crystallographic analyses of nicotinic amides 1 and 3, and pyridinium salts 2 and 4. Comparison of the Deltadelta values, which are the differences in the chemical shifts with reference compounds 5 or 6, showed that the absolute Deltadelta values of 2 and 4 are much larger than those of 1 and 3. In the UV-vis spectra, the n-->pi absorption of the C=S group of 2a exhibited a significant blue shift in CHCl(3). X-ray crystallographic analysis of 1-4 clearly showed that the C=S group of 2a and the C=O group of 4 are very close to the pyridinium moiety compared to the case of 1 and 3. In addition, the X-ray crystal packing structure of 2a showed the C=S group is sandwiched between two pyridinium rings. These experimental results strongly suggested the existence of attractive (C=S)...Py(+) and (C=O)...Py(+) interactions in solution and in crystal. The optimized geometries of 1 and 2 calculated at the HF/6-311G level are in good agreement with their X-ray geometries. MP2/6-311G calculations for the model systems of pyridinium salts 2 and 4 predicted that the electrostatic and induction energies are the major source of the attractive interactions. Since the larger contribution of electrostatic and induction interactions are characteristic features of cation-pi interactions, the (C=S)...Py(+) and (C=O)...Py(+) interactions would be classified as a cation-pi interaction.     

Changes of plasma L-arginine levels in spontaneously hypertensive rats under induced hypotension

Nicardipine, a dihydropyridine type calcium channel blocker, was infused at two flow-rates into spontaneously hypertensive (SH) and control normotensive Wistar-Kyoto (WKY) rats (young, 6-week-old and adult, 23-week-old, n = 5) under pentobarbital anesthesia, to cause hypotension. Mean arterial blood pressure and the concentrations of plasma amino acids and norepinephrine (NE) were measured before infusion and at each step of the infusion. The reduction in blood pressure caused by nicardipine induced a decrease in plasma L-arginine concentration in both young and adult SH rats, this effect being larger in adult rats. There was no significant change in plasma levels of L-arginine in age-matched WKY rats. The concentration of other amino acids did not change in both rat strains. On the contrary, there was an increase in plasma NE concentration in both SH and WKY rats after infusion with nicardipine. Plasma L-arginine concentration showed a good inverse correlation with the logarithm of plasma NE concentration in SH and WKY rats and the correlation was expressed as Y = -alpha log(X) + m (Y, plasma L-arginine concentration (nmol/mL); X, plasma NE concentration (pmol/mL); alpha, a slope; and m, an intercept). alpha, 43.0 and 4.35 for 23-week-old SH and WKY rats, respectively, and 17.0 and 4.0 for 6-week-old SH and WKY rats, respectively. The present data together with previous data suggest a direct noradrenergic stimulation of the synthesis of nitric oxide (NO) from L-arginine. The findings also indicate an impairment of the L-arginine metabolism or pools in SH rats compared with WKY rats. The deficiency of L-arginine increases with the age of SH rats and could be related to the development and maintenance of hypertension due to inefficient production of NO.     

Application of 1,2,3,5,6,7-hexahydropyrrolizinium perchlorate in the synthesis of 7a-substituted hexahydro-1h-pyrrolizines

The method for preparing 7a-substituted hexahydro-1H-pyrrolizines 2 from 1,2,3,5,6,7-hexahydropyrrol-izinium Perchlorate (3) was investigated, by which introduction of a wide variety of functionalities on C(7a) could be achieved easily.     

Coenzyme models. 32. Catalytic activity of polymer-bound thiazolium ions as estimated by flavin trapping technique

Three thiazolium-containing polymers, Th-7, Th-33, and Th-18-Py [where Th-x and Py mean x mol % thiazolium unit and pyridinium unit (54 mol %), respectively], were synthesized from partially p-chloromethylated polystyrene. The catalytic activities of these polymer catalysts in acyloin condensation of aldehydes and decarboxylation of α-keto acids were estimated kinetically by oxidative trapping of the key intermediate by flavin (flavin-trapping technique). In aqueous solution at 30°C, the catalytic activity of Th-18-Py and Th-33 in condensation of p-chlorobenzaldehyde was comparable with that of the cationic-micelle-bound thiazolium ion, whereas Th-7 and a monomeric thiazolium compound (N-benzylthiazolium bromide) scarcely exhibited any catalytic activity. The catalysis of the polymer-bound thiazolium ions was sensitively suppressed by increased ionic strength. These results suggest that the pendent thiazolium ion is activated by the relatively high charge density along the polymer chain: the cationic environment is able to facilitate dissociation of the thiazolium ion to the ylid form and deprotonation of the thiazolium-aldehyde adduct to the key intermediate.     

Quantitative determination of benzalkonium chloride in treated wood by solid-phase extraction followed by liquid chromatography with ultraviolet detection

Ammoniacal copper quat (ACQ) compound wood preservative is comprised of copper and quaternary ammonium compounds with benzalkonium chloride (BAC) as the active ingredient. Solid-phase extraction (SPE) followed by liquid chromatography with ultraviolet detection (LC-UV) was developed for quantitative determination of BAC in treated wood. Five species of wood were used, Japanese cedar (Cryptomeria japonica), Japanese larch (Larix leptolepis), Yezo spruce (Picea jezoensis), Sakhalin fir (Abies sachalinensis), and western hemlock (Tsuga heterophylla). BAC used in the present study was composed of 66% C12, 33% C14 and less than 1% C16. BAC was added to each wood species (500 mg) then extracted with HCl-ethanol (20 ml) and quantitatively determined with LC-UV (262 nm). Wood extractives from the heartwood of each species, except western hemlock, interfered with quantitative determination of BAC, but SPE with an Oasis MCX cartridge was effective in preventing this. Using the present methods, BAC homologue peaks were clearly confirmed without interference. Recoveries from wood ranged from 92 to 101% and the limit of quantitation was approximately 240 microg/g wood for the C12 and C14 homologues.     

Novel synthesis of heterocycles having a functionalized carbon center via nickel-mediated carboxylation: total synthesis of erythrocarine

Novel synthetic procedure of heterocycles was developed using nickel-mediated alkylative carboxylation, and the total synthesis of erythrocarine was achieved using this method and RCM of dienyne as the key steps. [reaction: see text]     

Requirement for radiation shields of transportation pipe for on line inhalation gases from compact cyclotron in positron emission tomography

In the unit housing of a compact cyclotron and positron emission CT (PET), positron emitting gas such as 15O, 11C, C15O2, C15O etc. is supplied from a cyclotron to a PET room through a transportation pipe with an appropriate shield to reduce positron annihilation radiation. Using lead or concrete shield blocks with various thicknesses, radiation leakage through the shield was measured by an ionization chamber type survey meter during continuous and constant supply of 15O gas of 1.85 GBq/min concentration which is the maximum dose for clinical use. The leakage radiation measured was 213.7, 56.0, 15.3, 5.0 muSv/week for lead shield with 1, 2, 3, and 4 cm thickness, respectively, and 193.3, 30.5 and 5.1 muSv/week for concrete shields with thickness of 10, 20, and 30 cm, respectively. The present study shows that to keep less than 300 muSv/week, which is the permissible dose rate of the boundary zone around the radiation controlled area by Japan Science and Technology Agency, it is required to use more than 8 mm thick lead shield or 7 cm thick concrete for continuous supply of 1.85 GBq/min 15O gas.     

In Situ Processing of Nano Crystalline Oxide Particles/Polymer Hybrid

Nano sized crystalline particles/polymer hybrids were synthesized form designed metal-organic precursors. The newly developed method is composed of the synthesis of organic matrix by polymerization and the in situ nucleation and growth of crystalline oxide particles in the organic matrix below 100°C. The design of metal-organic precursor modified with polymerizable ligand and the selection of reaction conditions does influence the size and crystallinity of ceramic particles in organic matrix. The nano-sized magnetic particle/polymer hybrid exhibits the interesting feature of superparamagnetism and quantum size effect. The crystalline particles of BaTiO₃/, PbTiO₃/, and KNbO₃/polymer hybrids behave to be dielectric and show the typical electro-rheological behavior.