State of titanium in Ti-containing silica and silicalite catalysts in relation to their oxidation activity

The nature of active titanium species for epoxidation of olefins with H₂O₂ and t-butyl hydroperoxide has been investigated for titanium silicalite (TS-1), titania silica (TiO₂/SiO₂) prepared by a sol-gel method, and titanium oxide supported on silica by a CVD method (TiO₂/SiO₂-CVD). IR and XANES analyses suggested that Ti in TiO₂/SiO₂ and TiO₂/SiO₂-CVD has a tetrahedral configuration bonded to SiO₂ and that in TS-1 has a configuration composed of >Ti=O or related to it. Their configurations are closely related to their reactivities for epoxidation of olefins in which the former works with t-butyl hydroperoxide and the latter with H₂O₂.     

Preparation,stability, reactivity and synthetic utility of a cadmium stabilized complex of difluoromethylene phosphonic acid ester

Diethyl bromodifluoromethyl phosphonate reacts readily with cadmium metal to form a stable cadmium complex. Depending on solvent, this functionalized organocadmium reagent exhibits stability for days to months. It reacts with a variety of electrophiles and serves as a synthetically useful source for the introduction of the difluoromethylene phosphonate group into organic compounds.The synthetic utility of a wide variety of fluoromethylene phosphonium ylides has been a major effort in our laboratory over the past several years [1]. The generation and capture of difluoromethylene ylides ($\text{1}$) as a general route to difluoromethylene olefins has been of especial interest to us [2]. In an effort to increase the nucleophilicity of the ylide, we have attempted to prepare the analogous phosphonate ylide ($\text{2}$). Although we have achieved modest success [3] by $\text{insitu}$ capture of ($\text{2}$) in the reaction of

sodium dialkyl phosphites with diethyl bromodifluoromethylphosphonate ($\text{3}$), attempts to pregenerate ($\text{2}$), either from diethyl difluoromethylphosphonate ($\text{4}$) or ($\text{3}$), have met with little success. ($\text{2}$) appears to have minimal stability even at low temperatures, and scale up processes of synthetic value would seem to be difficult.     

Molecular dynamics study of the methanol effect on the membrane morphology of perfluorosulfonic ionomers

The membranes of a perfluorosulfonic acid polymer swollen in 10-80 wt % methanol solution were investigated to elucidate the methanol effect on their morphologies, such as size of the solvent cluster, solvent location, and polymer structure, by using isothermal-isobaric molecular dynamics simulations. In higher methanol concentrations, we found less-spherical solvent aggregation and a more spread polymer structure because of the ampholytic nature of methanol. The partial radial distribution functions between solvent oxygen and fluorocarbons, which are composed of the main chain, clearly show that methanol is located closer to the polymer matrix than water. On the other hand, water is preferentially located in the vicinity of an acidic headgroup, SO(3)(-), compared with methanol, although both have similar attractive interaction energies to the acidic group. Furthermore, we discussed solvent dynamics and hydrogen bonding between sulfonic oxygen and solvent O-H groups.     

A simple and general chiral silicon Lewis acid for asymmetric synthesis: highly enantioselective [3+2] acylhydrazone-enol ether cycloadditions

A highly diastereo- and enantioselective [3 + 2] acylhydrazone-enol ether cycloaddition mediated by a simple chiral silane Lewis acid is described. The reactions are highly practical, as demonstrated by a larger scale (5 g of the hydrazone) reaction in which the product was obtained after recrystallization in 93% yield and 99% ee. Evidence for a stepwise mechanism and a model for the asymmetric induction are presented, as well.     

Synthetic studies directed toward the assembly of the C-glycoside fragment of the telomerase inhibitor D8646-2-6

[reaction: see text] Construction and characterization of the C-glycosidic moiety of telomerase inhibitor D8646-2-6 (1) are described. This is the first example of the C-glycosylation using electron-poor aromatics, 4-hydroxypyrone, as a glycosyl acceptor. The glycosylation reaction and base-promoted isomerization affords desired beta-C-glycoside in a 61% overall yield.     

Direct catalytic aldol-type reactions using RCH2CN

[reaction: see text] A copper fluoride-catalyzed cyanomethylation that can be applied to a wide range of ketones and aldehydes was developed using TMSCH(2)CN as a nucleophile. The reaction was extended to a conceptually more advanced copper alkoxide-catalyzed direct addition of alkylnitriles to aldehydes, which can act as a surrogate direct catalytic aldol reaction of esters. These reactions can be applied to the first catalytic enantioselective cyanomethylation of ketones and direct catalytic enantioselective cyanomethylation of aldehydes.     

Structure and ethanol complexation of cyclic tetrasaccharide in aqueous solution studied by NMR and molecular mechanics

The structure and ethanol complexation of a cyclic tetrasaccharide (CTS) in aqueous solution were investigated by proton NMR spectroscopy and molecular mechanics calculations. Two glucose units, A and B, of CTS are alternatively bonded by alpha-1,3 and alpha-1,6 linkages. The overlapped signals of protons A5, A6S, A6R, B3, B6S and B6R were resolved by spectral simulations to determine their chemical shifts and vicinal coupling constants. All vicinal coupling constants except for the A5-A6 spin system are consistent with the dihedral angles in the X-ray crystal structure. Each of protons A5, A6S, and A6R in the two units of A is equivalent with respect to the chemical shift. The vicinal coupling constants of (3)J(5-6S) and (3)J(5-6R) for unit A are close to the average of two rotamers that are present in crystals. The intensities of cross-peaks in the rotating frame nuclear Overhauser effect spectroscopy (ROESY) spectrum were rather well correlated with the effective distances calculated for the X-ray structure and molecular mechanics structures calculated in vacuo and water, although they are slightly better correlated with molecular mechanics structure in vacuo than with the other structures. From the changes of the chemical shifts of several CTS protons with increasing ethanol concentration, it was suggested that adsorption sites of ethanol on the plate structure of CTS are protons B2 and B4 (site B) in the concave face side and protons A1 and A2 (site A) in the convex back side. The binding constants for sites A and B are 0.0061 and 0.0176 M(-1), respectively. These binding constants are much smaller than a value of 4.1 M(-1) for the ethanol-alpha-cyclodextrin complex.     

Isolation and crystal structure of a water-soluble iridium hydride: a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds in acidic media

This paper reports the isolation and structural determination of a water-soluble hydride complex [Cp*Ir(III)(bpy)H](+) (1, Cp* = eta(5)-C(5)Me(5), bpy = 2,2'-bipyridine) that serves as a robust and highly active catalyst for acid-catalyzed transfer hydrogenations of carbonyl compounds at pH 2.0-3.0 at 70 degrees C. The catalyst 1 was synthesized from the reaction of a precatalyst [Cp*Ir(III)(bpy)(OH(2))](2+) (2) with hydrogen donors HCOOX (X = H or Na) in H(2)O under controlled conditions (2.0 < pH < 6.0, 25 degrees C) which avoid protonation of the hydrido ligand of 1 below pH ca. 1.0 and deprotonation of the aqua ligand of 2 above pH ca. 6.0 (pK(a) value of 2 = 6.6). X-ray analysis shows that complex 1 adopts a distorted octahedral geometry with the Ir atom coordinated by one eta(5)-Cp*, one bidentate bpy, and one terminal hydrido ligand that occupies a bond position. The isolation of 1 allowed us to investigate the robust ability of 1 in acidic media and reducing ability of 1 in the reaction with carbonyl compounds under both stoichiometric and catalytic conditions. The rate of the acid-catalyzed transfer hydrogenation is drastically dependent on pH of the solution, reaction temperature, and concentration of HCOOH. The effect of pH on the rate of the transfer hydrogenation is rationalized by the pH-dependent formation of 1 and activation process of the carbonyl compounds by protons. High turnover frequencies of the acid-catalyzed transfer hydrogenations at pH 2.0-3.0 are ascribed not only to nucleophilicity of 1 toward the carbonyl groups activated by protons but also to a protonic character of the hydrido ligand of 1 that inhibits the protonation of the hydrido ligand.     

Purification by HPLC and the UV/Vis absorption spectra of the nitrogen-containing incar-fullerenes iNC60, and iNC70

We report the purification of the nitrogen-containing incar-fullerenes iNC(60) and iNC(70), and their characterisation by UV-Vis absorption spectroscopy.