Chiral ligand-controlled asymmetric conjugate addition of alpha-trimethylsilanylacetate to acyclic and cyclic enones

The reaction of lithium ester enolate with enones provides a challenge for chemoselectivity, that is, discrimination between a conjugate addition and a 1,2-addition. Asymmetric conjugate addition of a lithium enolate of alpha-trimethylsilanylacetate to acyclic and cyclic alpha,beta-unsaturated ketones was mediated by an external chiral ligand to give the corresponding 1,4-adducts in good enantioselectivity of 74% and good chemoselectivity.     

Novel phenoxyalkylamine derivatives. VII. Synthesis and pharmacological activities of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives.

To find a novel alpha-blocker with high alpha-blocking selectivity against dopamine D2-receptor affinity, we performed structural modification of the alkylene chains and the substituents on two benzene rings of 2-alkoxy-5-[(phenoxyalkylamino)alkyl]benzenesulfonamide derivatives. The modification of the alkylene chain between the amino moiety in the center of the molecule and the benzene ring (ring A) was found to be the most significant. 5-[2-[[2-(5-Fluoro-2-methoxyphenoxy)ethyl]amino]propyl]-2- methoxybenzenesulfonamide (II-4), which possesses 1-methylethyl as the alkylene chain, exhibited high alpha-blocking selectivity as well as potent alpha-blocking activity.     

Aggregated structure analysis of polymer-protected platinum/ruthenium colloidal dispersions using EXAFS, HRTEM, and electron diffraction measurements

Polymer-protected platinum/ruthenium colloidal dispersions were prepared by refluxing mixed solutions of hexachloroplatinic(IV) acid and ruthenium(III) chloride in a mixture of ethanol/water (1/1 v/v) in the presence of poly(N-vinyl-2-pyrrolidone). The electronic spectra and transmission electron micrographs suggested that the colloidal dispersions are almost composed of the mixture of the small monometallic Pt and Ru clusters over all the ratio of Pt/Ru compositions. Extended X-ray absorption fine structure analyses and high resolution electron microprobe analyses indicated that no Pt/Ru alloy clusters exist in the dispersions, and the aggregation occurs between small monometallic Pt clusters (diameter ca. 15 A) and partially oxidized Ru microclusters (diameter less than 10 A). Electron diffraction measurements also suggested that the diffraction pattern of aggregated Pt/Ru cluster particles prepared by the simultaneous reduction of Pt and Ru ions is the same as that of the physical mixture of the small monometallic Pt and Ru clusters separately prepared. Therefore, it can be concluded that the aggregated Pt/Ru cluster particles, with 10 to 60 A in diameter, are built up by small monometallic Pt clusters and partially oxidized Ru microclusters, and that Pt/Ru alloy clusters are not formed.     

Charge-transfer phenomena in novel,dual-component,sugar-based organogels

The synthesis of a new saccharide-based gelator (2) containing a donor moiety has been described. Gelation experiments of a dual-component gel consisting of a saccharide-based gelator bearing an acceptor group (1) and of 2 have been performed in a variety of organic solvents and water. Moreover, gelation tests at different molar ratios of 1 and 2 have been performed in water, octanol, and diphenyl ether. In these last two solvents a gel color change was observed, from colorless to yellow, upon cooling of the sample to room temperature. This phenomenon was further investigated by UV-visible spectroscopy, which revealed the presence of charge-transfer interactions in the gel, in octanol. Temperature-dependence UV spectroscopy confirmed that such interactions occur in the gel but not in the corresponding solution sample. Furthermore, T(gel) measurements show that dual-component gels of 1 and 2 present increased thermal stability at a 50:50 ratio of the two gelators, in dependence of the solvent. Transmission electron microscopy (TEM) images of the single-component gels in diphenyl ether revealed that they consist of a fibrous network, while the dual-component gel presents a novel, helical, fibrous-bundle structure.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Studies on the syntheses of analgesics. Part 50. Synthesis of optically active 2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid. [Studies on the syntheses of heterocyclic compounds. Part 742]

2-[4-(1-Oxo-2-isoindolinyl)phenyl]propanoic acid ( 1 ) having a potent analgesic and anti-inflammatory activity could be obtained by three methods, which were found to provide extremely useful ways for the synthesis of 1 from the industrial point of view. (E)- and (Z)-Isomers of 2-butenoic acid and oxiranecarboxylic acid derivatives as the intermedaites in the synthesis of 1 were separated and characterized. Furthermore, the optical resolution of (±)-2-[4-(1-oxo-2-isoindolinyl)phenyl]propanoic acid was successfully achieved using cinchonidine as a resolution reagent.     

Control of photoinduced energy- and electron-transfer steps in zinc porphyrin-oligothiophene-fullerene linked triads with solvent polarity

The dramatic changes of the lifetimes of the charge-separated (CS) states were confirmed in zinc porphyrin (ZnP)-oligothiophene (nT)-fullerene (C(60)) linked triads (ZnP-nT-C(60)) with the solvent polarity. After the selective excitation of the ZnP moiety of ZnP-nT-C(60), an energy transfer took place from the (1)ZnP moiety to the C(60) moiety, generating ZnP-nT-(1)C(60). In polar solvents, the CS process also took place directly via the (1)ZnP moiety, generating ZnP(*+)-nT-C(60)(*-), as well as the energy transfer to the C(60) moiety. After this energy transfer, an indirect CS process took place from the (1)C(60) moiety. In the less polar solvent anisole, the radical cation (hole) of ZnP(*+)-nT-C(60)(*-) shifted to the nT moiety; thus, the nT moiety behaves as a cation trapper, and the rates of the hole shift were evaluated to be in the order of 10(8) s(-1); then, the final CS states ZnP-nT(*+)-C(60)(*-) were lasting for 6-7 mus. In the medium polar solvent o-dichlorobenzene (o-DCB), ZnP-nT(*+)-C(60)(*-) and ZnP(*+)-nT-C(60)(*-) were present as an equilibrium, because both states have almost the same thermodynamic stability. This equilibrium resulted in quite long lifetimes of the CS states (450-910 mus) in o-DCB. In the more polar benzonitrile, the generation of ZnP-nT(*+)-C(60)(*-) was confirmed with apparent short lifetimes (0.6-0.8 mus), which can be explained by the fast hole shift to more stable ZnP(*+)-nT-C(60)(*-) followed by the faster charge recombination. It was revealed that the relation between the energy levels of two CS states, which strongly depend on the solvent polarity, causes dramatic changes of the lifetimes of the CS states in ZnP-nT-C(60); that is, the most appropriate solvents for the long-lived CS state are intermediately polar solvents such as o-DCB. Compared with our previous data for H(2)P-nT-C(60), in which H(2)P is free-base porphyrin, the lifetimes of the CS states of ZnP-nT-C(60) are approximately 30 times longer than those in o-DCB.     

Carrier generation process on photoconductive polymer films as studied by magnetic field effects on the charge-transfer fluorescence and photocurrent

We have studied the magnetic field effects (MFEs) on the charge-transfer fluorescence and transient photocurrent of a 1,2,4,5-tetracyanobenzene-doped poly(N-vinylcarbazole) film, which reflect the recombination and escape yields of the carriers, respectively. The recombination yield dependence of the external magnetic field (B) clearly shows two types of the MFEs, growth with increasing B due to the hyperfine mechanism (HFM) and a negative dip due to the level-crossing mechanism (LCM). On the other hand, the escape yield indicates complementary MFEs with a sharp decrease in yield with increasing B and then a positive dip. Simultaneous observation of the HFM- and LCM-MFEs proves the stepwise hole-hopping mechanism rather the long-range hole-jumping one. The quantitative analysis of the recombination and escape MFEs is performed using the stochastic Liouville equations (SLE) for a one-dimensional lattice model in which the stepwise hole hops take place between the nearest neighbor carbazole units with spin conservation. The SLE analysis provides the recombination and hole transfer rate constants of 7.0 x 10(7) and 4.5 x 10(8) s(-1), respectively. The boundary site number for the ion pairs in the one-dimensional model is estimated by the best fit to the experimental results. The interionic distance of the boundary ion pair in the one-dimensional model including eight sites agrees with the thermalization distance in the Onsager model. Hence, it is concluded that the elementary processes in the Onsager model applied to molecular amorphous solids are the stepwise hole hops rather than a long-range hole jump.