Gas chromatography of hydrocarbons using packed liquid chromatographic capillary columns

Capillary columns of 0.3-0.5 mm i.d. packed with 3- to 30-μm silica-based stationary phases for liquid chromatography were used for gas chromatographic separation of hydrocarbons. Column efficiencies were evaluated for various commercially available packing material. The best column efficiency was achieved with 5-μm octadecyl group bonded silica gel, the surface of which was coated with a poly (dimethylsiloxane) film. The 30-cm column produced 11,000 theoretical plates.     

Electronic structures and stabilities of sodium clusters: jellium-sphere dimer calculation

Bonding properties of sodium-cluster dimers, (X ₄)₂ and (X ₈)₂, whereX _n is a jellium sphere corresponding to a cluster ofn atoms, were investigated by the linear-combination-of-jellium-orbitals method with local-spin-density-functional approximation. The stability ofn=8 clusters, observed in the experiment, is discussed in relation to the binding properties of dimers. We have found that (1) the (X ₄)₂ bonding has a covalent character, which makes theX ₈ formation favorable, and (2)X ₈ has an inert property because the force between jellium spheres in (X ₈)₂ is due to a weak dispersion force.     

Fluorescence spectra and chemical species of fluorescein molecules adsorbed on a calcinated porous Vycor glass

Properties of fluorescence and the excitation spectra of fluorescein molecules adsorbed onto a calcinated (773 K) porous Vycor glass have been investigated as a function of the amount of adsorbed dye (the surface coverage, θ = 0.00051 and 0.0098). The fluorescence and fluorescence-excitation spectra of fluorescein adsorbed onto Vycor glass showed the spectrum only due to cation species at θ = 0.00051. On the other hand, the spectra observed at θ = 0.0098 suggested the presence of cation, anion, and dianion species on the surface of Vycor glass. These results indicated the existence of at least two different types of adsorption sites involving the Brønsted acid site on the surfaces of Vycor glass.     

Multiplex amplified product-length polymorphism analysis of 36 mitochondrial single-nucleotide polymorphisms for haplogrouping of East Asian populations

We present a reliable, rapid, and economical multiplex amplified product-length polymorphism (APLP) method for analyzing the haplogroup-diagnostic mitochondrial single-nucleotide polymorphisms (mtSNPs) in East Asian populations. By examining only 36 haplogroup-specific mtSNPs in the coding region by using four 9-multiplex polymerase chain reaction (PCR) and subsequent electrophoresis, we could safely assign 1815 individuals from 8 populations of Japanese, Korean, Chinese, and Germans to 45 relevant haplogroups. This multiplex APLP analysis of coding-region mtSNPs for haplogrouping is especially useful not only for molecular phylogenetic studies but also for large-scale association studies due to its rapid and economical nature. This is the first panel of mtSNPs in the coding region to be used for haplogrouping of East Asian populations.     

Fischer indolization and its related compounds—VII : Development of abnormal fischer indolization of ortho-methoxyphenylhydrazone to provide a synthetic method for useful indole derivatives possessing an active methine group at C6 and novel 3,6′-biindole derivatives

Fischer indolization of ethyl pyruvate 2-methoxyphenylhydrazone (1) with p-toluene-sulfonic acid in benzene in the presence of an enolizable dicarbonyl or an indolic compound gave either an indole product having an active methine group at C₆ or a novel type of 3,6′-biindole compound. Structures of the products were established by NMR spectra and chemical evidence.     

Fused silica capillary tube isotachophoresis using a multichannel photodiode array detector

Isotachophoresis carried out in a 0.25 mm i.d. fused-silica capillary tube yielded high resolution, compared with that in a fluorinated ethylene-propylene polymer tube. The use of an ultraviolet-visible multichannel spectrophotometer with photodiode array as detector together with a cross flow cell (volume 0.01 μl) was investigated. The system was successfully applied to the analysis of cationic dyes such as neutral red, bismarck brown, and basic fuchsine.     

Separation of polyunsaturated fatty acid radicals by high-performance liquid chromatography with electron spin resonance and ultraviolet detection

In the reaction of soybean lipoxygenase (EC 1.13.11.12) with polyunsaturated fatty acids such as linoleic, linolenic and arachidonic acids, some radical species were detected using the electron spin resonance (ESR) spin-trapping technique. The radical species derived from the three polyunsaturated fatty acids were not distinguishable because the ESR spectra of the spin adducts of nitrosobenzene with their three radical species showed no difference in their hyperfine splittings. To overcome this defect of the spin-trapping technique, these spin-adducts were separated by employing high-performance liquid chromatography (HPLC) combined with ESR spectroscopy. The spin adducts were eluted from a C18 reversed-phase column in the order linolenic acid, linoleic acid and arachidonic acid. The half-lives of the spin adducts separated by HPLC-ESR were determined as linoleic acid 600 min, linolenic acid 360 min and arachidonic acid 160 min. The use of an ultraviolet detector together with the HPLC-ESR technique resulted in a 500-fold increase in sensitivity in the detection of the radical species.     

A comparison of supercritical carbon dioxide and organic solvents for the intercalation of 4-phenylazoaniline into a pillared clay mineral

The intercalation of 4-phenylazoaniline (PAA) in supercritical carbon dioxide (SC-CO(2)) into montmorillonite (TMA-Mnt) pillared with tetramethylammonium ions at 313 K and 15 MPa was investigated. The adsorption rate and equilibrium PAA uptake were compared with those in n-hexane, CCl(4) and benzene solutions at 313 K. The XRD and N(2) adsorption/desorption analyses showed that TMA-Mnt after adsorption of PAA in SC-CO(2) had the same pore structure as after adsorption of PAA in normal solvents. SC-CO(2) was found to be a good medium for PAA adsorption owing to its having a relatively high adsorption rate and the highest adsorptivity at the same PAA concentration. The properties of PAA adsorption on TMA-Mnt could be well elucidated by the difference in solubility parameters between liquid and solid phases.     

How Effectively is the Photon Activation Analysis Applied to Meteorite Samples?

Chondritic meteorite samples were analyzed nondestructively by photon activation analysis. Powdered samples weighing about 50 mg each were irradiated with photons (-rays) converted from electrons accelerated by a linear electron accelerator at 20 and 30 MeV. With 30-minute and 6-hour irradiations, 11 and 12 elements with duplication of 6 elements could be determined, respectively. Considering that several major elements including Mg, Si and Fe can be determined in addition to Ti, Rb, Sr, Y and Zr, which cannot or hardly be determined by instrumental neutron activation analysis (INAA) with rather high sensitivity, instrumental photon activation analysis is as effective as INAA.     

Directed evolution experiments reveal mutations at cycloartenol synthase residue His477 that dramatically alter catalysis

[reaction: see text] Cycloartenol synthase cyclizes and rearranges oxidosqualene to the protosteryl cation and then specifically deprotonates from C-19. To identify mutants that deprotonate differently, randomly generated mutant cycloartenol synthases were selected in a yeast lanosterol synthase mutant. A novel His477Asn mutant was uncovered that produces 88% lanosterol and 12% parkeol. The His477Gln mutant produces 73% parkeol, 22% lanosterol, and 5% Delta(7)-lanosterol. These are the most accurate lanosterol synthase and parkeol synthase that have been generated by mutagenesis.