Supercritical fluid extraction and gas chromatography or electroanalysis of metal chelates from different sample matrices

The supercritical fluid extraction of Pb(DDC)2 and MoO2(acac)2 complexes is performed. The previously formed complexes are used in order to simplify the extraction process. In the extraction cell, 9.0 mg of Pb(DDC)2 or 30.0 mg of MoO2(acac)2 is added. With these two complexes, a study of static and dynamic extraction as a function of pressure (1000-2500 psi), temperature (40-160 degrees C), and presence of modifier (methanol) is performed. Under the best conditions, 5.6 mg of Pb(DDC)2 (2.3 mg of Pb2+) is recovered. The parameters are 2500 psi of pressure, 160 degrees C of temperature, 0.5 mL methanol (placed in a 10-mL extraction cell), 60.0 min of static extraction, and 2.0 min of dynamic extraction. It is necessary to add 3.0 mL of methanol to enhance efficiency on the MoO2(acac)2 complex recovery. Quantitative extractions of MoO2(acac)2 (9.0 mg of MoVI) are obtained when the experiments are carried out under 1000-2500 psi of pressure, 140 degrees C, and times no longer than 10.0 min. Then, the study is carried out forming the in situ complexes. For this purpose, metallic ion and ligand are added. Under these conditions, the Pb2+ recovery decreases from 2.3 to 1.9 mg, and the MoVI recovery decreases from 9.0 to 1.0 mg. When 1.9 mg of Pb2+ and 1.0 mg of MoVI or less is placed in the extraction cell, the recoveries are always 100%. The Pb2+ extracts are directly accomplished using gas chromatography-flame ionization detection (GC-FID), and the MoVI extracts are analyzed using GC-FID and catalytic adsorption voltammetry. The quantitation of pure extracts is carried out by constructing calibration curves with complex solutions and sample solutions using the standard addition method. This method is applied by determination of Pb2+ in sodium alginate extracted from algae and blood, urine, and human milk from patients with diagnosed plumbunemy. MoVI is determined in irrigation water and pasture of animal intake.     

Probing molecular wires: synthesis, structural, and electronic study of donor-acceptor assemblies exhibiting long-range electron transfer

A series of donor-acceptor arrays (C60-oligo-PPV-exTTF; 16-20) incorporating pi-conjugated oligo(phenylenevinylene) wires (oligo-PPV) of different length between pi-extended tetrathiafulvalene (exTTF) as electron donor and C60 as electron acceptor has been prepared by multistep convergent synthetic approaches. The electronic interactions between the three electroactive species present in 16-20 were investigated by UV-visible spectroscopy and cyclic voltammetry (CV). Our studies clearly show that, although the C60 units are connected to the exTTF donors through a pi-conjugated oligo-PPV framework, no significant electronic interactions are observed in the ground state. Interestingly, photoinduced electron-transfer processes over distances of up to 50 Angstroms afford highly stabilized radical ion pairs. The measured lifetimes for the photogenerated charge-separated states are in the range of hundreds of nanoseconds (approximately 500 ns) in benzonitrile, regardless of the oligomer length (i.e., from the monomer to the pentamer). A different lifetime (4.35 micros) is observed for the heptamer-containing array. This difference in lifetime has been accounted for by the loss of planarity of the oPPV moiety that increases with the wire length, as established by semi-empirical (PM3) theoretical calculations carried out with 19 and 20. The charge recombination dynamics reveal a very low attenuation factor (beta = 0.01 +/- 0.005 Angstroms(-1)). This beta value, as well as the strong electron coupling (V approximately 5.5 cm(-1)) between the donor and the acceptor units, clearly reveals a nanowire behavior for the pi-conjugated oligomer, which paves the way for applications in nanotechnology.     

C-H activations at iridium(I) square-planar complexes promoted by a fifth ligand

In the presence of ligands such as acetonitrile, ethylene, or propylene, the Ir(I) complex [Ir(1,2,5,6-eta-C8H12)(NCMe)(PMe3)]BF4 (1) transforms into the Ir(III) derivatives [Ir(1-kappa-4,5,6-eta-C8H12)(NCMe)(L)(PMe3)]BF4 (L = NCMe, 2; eta2-C2H4, 3; eta2-C3H6, 4), respectively, through a sequence of C-H oxidative addition and insertion elementary steps. The rate of this transformation depends on the nature of L and, in the case of NCMe, the pseudo-first-order rate constants display a dependence upon ligand concentration suggesting the formation of five-coordinate reaction intermediates. A similar reaction between 1 and vinyl acetate affords the Ir(III) complex [Ir(1-kappa-4,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (7) via the isolable five-coordinate Ir(I) compound [Ir(1,2,5,6-eta-C8H12){kappa-O-eta2-OC(Me)OC2H3}(PMe3)]BF4 (6). DFT (B3LYP) calculations in model complexes show that reactions initiated by acetonitrile or ethylene five-coordinate adducts involve C-H oxidative addition transition states of lower energy than that found in the absence of these ligands. Key species in these ligand-assisted transformations are the distorted (nonsquare-planar) intermediates preceding the intramolecular C-H oxidative addition step, which are generated after release of one cyclooctadiene double bond from the five-coordinate species. The feasibility of this mechanism is also investigated for complexes [IrCl(L)(PiPr3)2] (L = eta2-C2H4, 27; eta2-C3H6, 28). In the presence of NCMe, these complexes afford the C-H activation products [IrClH(CH=CHR)(NCMe)(PiPr3)2] (R = H, 29; Me, 30) via the common cyclometalated intermediate [IrClH{kappa-P,C-P(iPr)2CH(CH3)CH2}(NCMe)(PiPr3)] (31). The most effective C-H oxidative addition mechanism seems to involve three-coordinate intermediates generated by photochemical release of the alkene ligand. However, in the absence of light, the reaction rates display dependences upon NCMe concentration again indicating the intermediacy of five-coordinate acetonitrile adducts.     

Two Intercalation Mechanisms of Oxazole Yellow Dimer (YOYO-1) into DNA

The oxazole yellow dye, YOYO-1 (a symmetric homodimer), is a commonly used molecule for staining DNA. We applied the brightness analysis to study the intercalation of YOYO-1 into the DNA. We distinguished two binding modes of the dye to dsDNA: mono-intercalation and bis-intercalation. Bis-intercalation consists of two consecutive mono-intercalation steps, characterised by two distinct equilibrium constants (with the average number of base pair per binding site equals 3.5): K1=3.36±0.43×107M−1 and K2=1.90±0.61×105M−1, respectively. Mono-intercalation dominates at high concentrations of YOYO-1. Bis-intercalation occurs at low concentrations.     

Waste Cleaning Waste: Combining Alginate with Biowaste-Derived Substances in Hydrogels and Films for Water Cleanup

Biowaste-derived substances isolated from green compost (BBS-GC) are environmentally friendly reactants similar to humic substances, which contain multiple functionalities, that are suitable for adsorbing different kinds of pollutants in wastewater. Herein, sodium alginate (derived from brown algae) cross-linked with both Ca²⁺ ions and BBS-GC in the form of hydrogels and dried films are proposed as green, easy-to-form, and handleable materials for tertiary water treatments. The results show that both hydrogels and films are mechanically stable and can effectively remove differently charged dyes through an adsorption mechanism that can be described by the Freundlich model. BBS-GC-containing gels always performed better than samples prepared without BBS-GC, revealing that such unconventional materials can integrate waste valorization and water decontamination, potentially providing social and environmental benefits.     

Synthesis and photophysical evaluations of β-fused uracil-porphyrin derivatives

New β-fused uracil-porphyrin conjugates were synthesized by the tetramerization of uracil-pyrroles under acidic conditions. Two different synthetic approaches were systematically studied in order to evaluate their efficiency, as well as the possibility to obtain a single regioisomer. Metallation effects were studied for aggregation in solution, and preliminary photophysical experiments were also performed in order to evaluate the potential of these new compounds.