Surface modulation of magnetic nanocrystals in the development of highly efficient magnetic resonance probes for intracellular labeling

High-quality biocompatible magnetic iron oxide (Fe3O4) nanocrystals were developed through a ligand exchange process of hydrophobically capped nanocrystals with hydrophilic molecules. By simple modulation of the nanocrystal surface ligand charge properties, we have been able to prepare magnetic nanocrystals with excellent intracellular labeling capabilities that efficiently label a variety of cell types without the need for additional transport facilitating agents. The excellent intracellular labeling capability of the newly developed cationic WSIO has further led to successful MRI monitoring of the migration of neural stem cells in rat spinal cord. The magnetic nanocrystals developed here have great potential in applications for labeling of various cell types and also the monitoring of cell-based medical treatments and cancer metastasis.     

Physicochemical properties of Ti-grafted SBA-15

Partial oxidation of n-heptane to syngas at 400–450°C was investigated over Rh and Rh-Ni based catalysts. The Rh/-Al₂O₃ catalyst exhibited much better catalytic activity than the Rh-Ni/-Al₂O₃ catalyst. A combination of the Rh-based catalyst with the WGS reaction catalyst (Fe₃O₄—Cr₂O₃) increases the hydrogen selectivity but has no distinct effect on shifting the balance of the partial oxidation of n-heptane.This revised version was published online in December 2005 with corrections to the Cover Date.     

N-isobutyloxycarbonylation for improved detection of 3'-hydroxystanozolol and its 17-epimer in doping control

An improved screening method was developed for 3'-hydroxystanozolol and its 17-epimer in human urine involving gas chromatography-mass spectrometry (GC-MS) with N-isobutyloxycarbonyl (isoBOC) and O-trimethylsilyl (TMS) derivatization. A procedure was reported previously for the pentane extraction of many steroids from urine in doping control, but it was not suitable for the detection of stanozolol metabolites. Compared with the n-pentane extraction method, which gave a poor recovery (< 10%), isoBOC extraction resulted in a good recovery (> 80%). The sensitivity and specificity of mixed N-isoBOC-O-TMS derivatization were adequate for the detection of 3'-hydroxystanozolol and its 17-epimer when 3 ml of urine was used with spiking at a level of 2 ng ml-1. When applied to a stanozolol-positive urine sample, the proposed method allowed rapid and sensitive screening for the detection of 3'-hydroxystanozolol and its 17-epimer.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.     

catena‐Poly[[copper(II)‐μ‐2‐[bis­(2‐pyridylmeth­yl)amino]butyrato‐κ4N,N′,N′′,O:κO′] perchlorate]

The copper(II) ion in the syn–anti carboxyl­ate‐bridged one‐dimensional zigzag chain title complex, {[Cu(C₁₆H₁₈N₃O₂)]ClO₄}_n, exhibits a distorted trigonal–bipyramidal environment. Two N atoms and one carboxyl­ate O atom of the ligand form the basal plane, while the axial positions are filled by an N atom of the ligand and one O atom belonging to the carboxyl­ate group of an adjacent mol­ecule. The crystal packing is enhanced by C—H⋯O(perchlorate) hydrogen bonds.     

Determination of impurities in semiconductor grade silicon by instrumental neutron activation analysis

Instrumental neutron activation analysis has been applied to semiconductor grade silicon to study the concentration levels of impurity elements, the contamination during the single crystal growing process, and the vertical and radial distributions of impurities, along with the decontamination effect in the analysis. Twenty elements of Au, Br, As, W, Cr, Co, Na, Eu, La, Se, Zn, U, Th, Hf, Fe, Sb, Ag, Ce, Tb and Ta have been analyzed in p- and n-type wafers, single crystals and a polycrystal by a single comparator method using two comparators of gold and cobalt. Considerable surface contamination has been found and could be removed by etching the surface with nitric and hydrofluoric acid before and after irradiation. The impurity concentration has been found to be generally increased in the process of single crystal growth. The vertical and radial distributions of impurities have revealed that some impurity elements were more concentrated in the top region of a single crystal rod than in the middle region, and that Br, Cr, La, Eu and Sb were enriched in the central region and As, U and Fe in the outer region.     

Preparation of (R)-11-hydroxyaporphine directly from (R)-10,11-dihydroxyaporphine ((R)-apomorphine)

A Regioselective synthesis of (R)-11-hydroxyaporphine 2 directly from (R)-10,11-dihydroxyaporphine ((R)-apomorphine, 1 ) is described for the first time. The isopropylidene ketal ring of 10,11-(isopropyl-idenyldioxy)aporphine 5 obtained by the isopropylidenation of apomorphine was regioselectively opened by ten equivalents of trimethylaluminum to give (R)-10-hydroxy-11-tert-butyloxyaporphine 6 . The free 10-hydioxyl position of 6 was triflated with N-pbenyltrifluoromethanesulfonimide and potassium carbonate under reflux to give (R)-10-[(trifluoromethyl)sulfonyloxy]-11-tert-butyloxyaporphine 7 . The reduced product, 11-tert-butyloxyaporphine 8 was prepared from 7 by a palladium-catalyzed hydrogenolysis. The ether cleavage of (R)-11-tert-butyloxyaporphine with 48% hydrobromic acid afforded the desired (R)-11-hydroxyaporphine 2 in good yield.     

Cure behavior and thermal stability of an epoxy: new bismaleimide blends for composite matrices

A new bismaleimide (BMI) resin was synthesized to formulate epoxy(tetraglycidyl diaminodiphenyl methane; TGDDM) – bismaleimide thermoset blends for composite matrix applications. 4,4′-diaminodiphenyl methane (DDM) was used as an amine curing agent for the TGDDM. A Fourier transform infrared (FTIR) spectroscopy was employed to characterize the new BMI resin. Cure behavior of the epoxy–BMI blends was studied using a differential scanning calorimeter (DSC). DSC thermograms of the thermoset blends indicated two exothermic peaks. The glass transition temperature of the thermoset blends decreased with BMI content. Thermogravimetric analysis (TGA) was carried out to investigate thermal degradation behavior of the cured epoxy–BMI thermoset blends. The new BMI resin reacted partially with the DDM and weak intercrosslinking polymer networks were formed during cure of the thermoset blends.     

Thermal properties of bio flour-filled polypropylene bio-composites with different pozzolan contents

In this study, the thermal properties of bio-flour-filled, polypropylene (PP) bio-composites with different pozzolan contents were investigated. With increasing pozzolan content, the thermal stability, 5% mass loss temperature and derivative thermogravimetric curve (DTG_max) temperatures of the bio-composites slightly increased. The coefficient of thermal expansion (CTE) and thermal expansion of the bio-composites decreased as the pozzolan content increased. The glass transition temperature (T _g), melting temperature (T _m) and percentage of crystallinity (X _c) of the bio-composites were not significantly changed. The thermal stability, thermal expansion and X _c of the maleic anhydride-grafted PP (MAPP)-treated bio-composites were much higher than those of non-treated bio-composites at 1% pozzolan content due to enhanced interfacial adhesion. X-ray diffraction (XRD) analysis confirmed the crystallinity of pozzolan-added bio-composites. From these results, we concluded that the addition of pozzolan in the bio-composites was an effective method for enhancing the thermal stability and thermal expansion.     

Tris(2,2′-bipyridyl)ruthenium(II) electrogenerated chemiluminescence sensor based on carbon nantube dispersed in sol-gel-derived titania-Nafion composite films

A highly sensitive and stable tris(2,2′-bipyridyl)ruthenium(II) (Ru(bpy)₃²⁺) electrogenerated chemiluminescence (ECL) sensor was developed based on carbon nanotube (CNT) dispersed in mesoporous composite films of sol-gel titania and perfluorosulfonated ionomer (Nafion). Single-wall (SWCNT) and multi-wall carbon nanotubes (MWCNT) can be easily dispersed in the titania-Nafion composite solution. The hydrophobic CNT in the titania-Nafion composite films coated on a glassy carbon electrode certainly increased the amount of Ru(bpy)₃²⁺ immobilized in the ECL sensor by adsorption of Ru(bpy)₃²⁺ onto CNT surface, the electrocatalytic activity towards the oxidation of hydrophobic analytes, and the electronic conductivity of the composite films. Therefore, the present ECL sensor based on the CNT-titania-Nafion showed improved ECL sensitivity for tripropylamine (TPA) compared to the ECL sensors based on both titania-Nafion composite films without CNT and pure Nafion films. The present Ru(bpy)₃²⁺ ECL sensor based on the MWCNT-titania--Nafion composite gave a linear response (R² = 0.999) for TPA concentration from 50 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 10 nM while the ECL sensors based on titania-Nafion composite without MWCNT, pure Nafion films, and MWCNT-Nafion composite gave a detection limit of 0.1 μM, 1 μM, and 50 nM, respectively. The present ECL sensor showed outstanding long-term stability (no signal loss for 4 months).