Aptamer-based label-free detection of PDGF using ruthenium(II) complex as luminescent probe

We report a simple, cost-effective, and label-free detection method, consisting of a platelet-derived growth factor (PDGF) binding aptamer and hydrophobic Ru(II) complex as a sensor system for PDGF. The binding of PDGF with the aptamer results in the weakening of the aptamer–Ru(II) complex, monitored by luminescence signal. A substantial enhancement in the luminescence intensity of Ru(II) complex is observed in the presence of aptamer due to the hydrophobic interaction. Upon addition of PDGF, the luminescence intensity is decreased, due to the stronger interaction between the aptamer and PDGF resulting in the displacement of Ru(II) complex to the aqueous solution. Our assay can detect a target specifically in a complex medium such as the mixture of proteins, at a concentration of 0.8 pM.

Characterization and microhardness of Co−W coatings electrodeposited at different pH using gluconate bath: A comparative study

Electrodeposition of Co–W alloy coatings has been carried out with DC and PC using gluconate bath at different pH. These coatings are characterized for their structure, morphology and chemical composition by X‐ray diffraction, field emission scanning electron microscopy, differential scanning calorimetry and X‐ray photoelectron spectroscopy (XPS). Alloy coatings plated at pH8 are crystalline, whereas coatings electrodeposited at pH5 are nanocrystalline in nature. XPS studies have demonstrated that as‐deposited alloy plated at pH8 with DC contain only Co²⁺ and W⁶⁺ species, whereas that alloy plated at pH5 has significant amount of Co⁰ and W⁰ along with Co²⁺ and W⁶⁺ species. Again, Co²⁺ and W⁶⁺ are main species in all as‐deposited PC plated alloys in both pH. Co⁰ concentration increases upon successive sputtering of all alloy coatings. In contrast, mainly W⁶⁺ species is detected in the following layers of all alloys plated with PC. Alloys plated at pH5 show higher microhardness compared to their pH8 counterparts. Copyright © 2013 John Wiley & Sons, Ltd.     

Investigation of the Thermal Conductivity of Selected Rare Earth Aluminates

As a part of the thermophysical property studies on rare earth based oxide ceramics thermal conductivity of the aluminates of samarium and dysprosium was investigated employing laser flash technique and covering a temperature range from 673 to 1373 K. Heat transport behaviour was briefly examined by analysing the variation of thermal resistivity as a function of temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Copper nanoparticles entrapped in SWCNT-PPy nanocomposite on Pt electrode as NOx electrochemical sensor

A highly sensitive NO_x sensor was designed and developed by electrochemical incorporation of copper nanoparticles (CuNP) on single-walled carbon nanotubes (SWCNT)-polypyrrole (PPy) nanocomposite modified Pt electrode. The modified electrodes were characterized by scanning electron microscopy and energy dispersive X-ray analysis. Further, the electrochemical behavior of the CuNP-SWCNT-PPy-Pt electrode was investigated by cyclic voltammetry. It exhibited the characteristic CuNP reversible redox peaks at −0.15 V and −0.3 V vs. Ag/AgCl respectively. The electrocatalytic activity of the CuNP-SWCNT-PPy-Pt electrode towards NO_x is four-fold than the CuNP-PPy-Pt electrode. These results clearly revealed that the SWCNT-PPy nanocomposite facilitated the electron transfer from CuNP to Pt electrode and provided an electrochemical approach for the determination of NO_x. A linear dependence (r² = 0.9946) on the NO_x concentrations ranging from 0.7 to 2000 μM, with a sensitivity of 0.22 ± 0.002 μA μM⁻¹ cm⁻² and detection limit of 0.7 μM was observed for the CuNP-SWCNT-PPy-Pt electrode. In addition, the sensor exhibited good reproducibility and retained stability over a period of one month.     

Optical Recognition of Anions by Ruthenium(II)-Bipyridine-Calix[4]Arene System

The two t-butylcalix[4]arene attached ruthenium(II)-bipyridine complexes (Rubc2 and Rubc3) has been synthesized and the anion recognition studies have been carried out using emission techniques. The binding of anions, which are sensed by the complexes, are studied by UV-visible and emission techniques. The complex Rubc2 recognizes the Cl^?, H₂PO₄ ^? and AcO^? anions. The complex Rubc3 recognizes the Br^? and AcO^? anions. The AcO^? quenches the emission intensity of both two complexes but the other anion increases the emission intensity of the complexes. The excited state lifetime and transient absorption studies were carried out the AcO^? facilitates non radiative pathway. The other anions stabilize the excited state and facilitate the radiative pathway.     

Electron transfer reaction of oxo(salen)chromium(V) ion with anilines

The kinetics of oxidation of 16 meta-, ortho-, and para-substituted anilines with nine oxo(salen)chromium(V) ions have been studied by spectrophotometric, ESIMS, and EPR techniques. During the course of the reaction, two new peaks with lambda(max) at 470 and 730 nm appear in the absorption spectrum, and these peaks are due to the formation of emeraldine forms of oligomers of aniline supported by the ESIMS peaks with m/z values 274 and 365 (for the trimer and tetramer of aniline). The rate of the reaction is highly sensitive to the change of substituents in the aryl moiety of aniline and in the salen ligand of chromium(V) complexes. Application of the Hammett equation to analyze kinetic data yields a rho value of -3.8 for the substituent variation in aniline and +2.2 for the substituent variation in the salen ligand of the metal complex. On the basis of the spectral, kinetic, and product analysis studies, a mechanism involving an electron transfer from the nitrogen of aniline to the metal complex in the rate controlling step has been proposed. The Marcus equation has been successfully applied to this system, and the calculated values are compliant with the measured values.     

ANTHEM: anatomically tailored hexagonal MRI

PURPOSE: This study aimed to investigate the use of anatomically tailored hexagonal sampling for scan-time and error reduction in MRI. MATERIALS AND METHODS: Anatomically tailored hexagonal MRI (ANTHEM), a method that combines hexagonal sampling with specific symmetry in anatomical geometry, is proposed. By using hexagonal sampling, aliasing artifacts are moved to regions where, due to the nature of the anatomy, aliasing is inconsequential. This can be used to either reduce scan time while maintaining spatial resolution or reduce residual errors in speedup techniques like UNFOLD and k-t BLAST/SENSE, which undersample k-space and unwrap fold-over artifacts during reconstruction. Computer simulations as well as phantom and volunteer studies were used to validate the theory. A simplified reconstruction algorithm for hexagonally sampled and subsampled k-space data was also used. RESULTS: A reduction in sampling density of 13.4% and 25% in each hexagonally sampled dimension was achieved for spherical and conical geometries without aliasing or reduction in spatial resolution. Optimal subsampling schemes that can be utilized by UNFOLD and k-t BLAST/SENSE were derived using hexagonal subsampling, which resulted in maximal, isotropic dispersal of the aliases. In combination with UNFOLD, ANTHEM was shown to move residual aliasing artifacts to the corners of the field of view, yielding reduced artifacts in CINE reconstructions. CONCLUSIONS: ANTHEM was successful in reducing acquisition time in conventional MRI and in reducing errors in UNFOLD imaging.     

Preparation and Diels-Alder chemistry of 4-vinylimidazoles

Various 4-vinylimidazole derivatives have been prepared from the corresponding 4-iodoimidazoles or from urocanic acid. Several methods for the elaboration of these vinylimidazoles and their Diels-Alder reactions are reported. All of the vinylimidazoles prepared in the course of this study react with N-phenylmaleimide quite readily with mild thermal activation providing a single cycloadduct, in most cases the initial, nonaromatic adduct. With more electron rich substrates, there is a tendency for these initial cycloadducts to undergo aromatization, ene reaction, and oxidation although this can be circumvented to a large extent by the choice of reaction conditions. Limited reactions were observed with other dienophiles, providing the expected cycloadducts in most cases, although an abnormal adduct was obtained in one case with dimethyl acetylene dicarboxylate. These substrates also participate in regioselective Diels-Alder reactions with monoactivated dienophiles, but require fairly forcing conditions, thus only providing the aromatized cycloadducts in modest yields. An investigation of substituent effects at the 2-position of the imidazole moiety was undertaken, in which electron-donating and weakly electron-withdrawing substituents are tolerated. In addition, several substrates with terminally substituted vinyl moieties have been investigated.     

Reaction of dimethoxycarbene-DMAD zwitterion with 1,2-diones and anhydrides: a novel synthesis of highly substituted dihydrofurans and spirodihydrofurans

The zwitterion formed by the reaction of dimethoxycarbene and DMAD adds efficiently to one of the carbonyl groups of 1,2-dicarbonyl compounds and anhydrides to generate dihydrofurans and spirodihydrofurans in good yields. In many cases, the carbene inserts into the C-C bond of the dione to yield masked vicinal tricarbonyl systems.     

An N-heterocyclic carbene-catalyzed [8 + 3] annulation of tropone and enals via homoenolate

A novel protocol for the annulation of tropone to enals involving nucleophilic heterocyclic carbene (NHC) catalyzed homoenolate formation has been developed. Interestingly, the reaction led to bicyclic delta-lactones instead of the expected gamma-spirolactones, presumably by the uncommon [8 + 3] annulation pathway. The strategy works well with a variety of enals.