An organocatalytic synthesis of N-sulfonyl imines using chloramine-T in aqueous medium

N-Sulfonyl imines have been synthesized in good to excellent yields from aldehydes and chloramine-T using proline as an organocatalyst in aqueous medium at ambient temperature. The protocol is applicable to a wide range of aldehydes, especially enals exhibit remarkable efficiency in the reaction. The reaction presumably occurs via iminium activation and opens new avenues for the synthesis of N-sulfonyl imines under environmentally benign and mild conditions.     

Ring opening of epoxides with alcohols using Fe(Cp)2BF4 as catalyst

Fe(Cp)₂BF₄ is an efficient catalyst for the alcoholysis of aromatic, aliphatic, and cyclic epoxides giving excellent yields of the corresponding β-alkoxy alcohols under ambient conditions. The methanolysis of styrene oxide using Fe(Cp)₂BF₄ as a catalyst (5 mol %) gave excellent yield of 2-methoxy-2-phenylethanol with complete regio-selectivity. The ring opening of cyclic epoxides gave 77–97% yields of trans-β-methoxy alcohols, in 0.5–6 h. The use of 1,2-epoxyhexane and 1,2-epoxydodecane as substrates gave both regioisomers in excellent yields. The first order rate of reaction with respect to catalyst was observed for the kinetics of ring opening of 1,2-epoxyhexane with methanol.     

Base mediated synthesis of α-aminated aroyl/acetylnaphthalenes through [4+2] annulations

We have developed a base promoted simple, efficient and alternative approach for the synthesis of 4-amino-3-aroyl//heteroaroyl/acetyl-2-methylsulfanyl-naphthalene-1-carbonitriles by reaction of easily accessible 3,3-bis(methylthio)-1-aryl/heteroaryl/acetylprop-2-en-1-one and 2-cyanomethyl-benzonitrile. Reaction of 1-(2-halo/methoxy-phenyl)-3,3-bis(methylthio)prop-2-en-1-one and 2-cyanomethyl-benzonitrile under basic conditions also afforded 6-(methylthio)-7-oxo-7,12-dihydrobenzo[c]acridine-5-carbonitrile along with usual product. Structure of the synthesized product has been confirmed by single X-ray crystallography.     

Visible-light-promoted aerobic oxidative cyclization to access 1,3,4-oxadiazoles from aldehydes and acylhydrazides

A novel and practical access to symmetrical and unsymmetrical 2,5-disubstituted 1,3,4-oxadiazoles directly from aldehydes and acylhydrazides using visible light irradiation under an air atmosphere in the presence of eosin Y as an organophotoredox catalyst at rt is reported. This is the first example of oxidative cyclization of acylhydrazones employing air and visible light as inexpensive, readily available, non-toxic, and sustainable reagents.     

Stereoselective total synthesis of oplopandiol,oploxyne A,and oploxyne B

A stereoselective total synthesis of oplopandiol, oploxyne A, and (−)-oploxyne B is described. The key reactions include Sharpless asymmetric epoxidation, d-proline catalyzed aminoxylation, Cadiot–Chodkiewicz cross-coupling reaction, m-CPBA induced substrate-controlled stereoselective epoxidation, and Lewis acid catalyzed stereo- and regioselective ring-opening of epoxide.     

Experimental and Theoretical Studies on Synthesized Compounds as Corrosion Inhibitor for Mild Steel in Hydrochloric Acid Solution

Imidazole derivatives, namely, 1-((1-(piperazinomethyl)-1H-benzoimidazol-2-yl)methyl)-2-phenylhydrazine (PBIP), and 1-((1-(morpholinomethyl)-1H-benzoimidazol-2-yl)methyl)-2-phenylhydrazine (MBIP) were synthesized and investigated as inhibitors for mild steel corrosion in 15% HCl solution using weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. It was found that the inhibition efficiency of both the inhibitors increases with increase in concentration of inhibitors and decreases with increase in temperature. The inhibitors, PBIP and MBIP, show corrosion inhibition efficiency of 92.6% and 91.4% at 300 ppm concentration, respectively, at 303 K. Polarization studies showed that both the studied inhibitors were of mixed type in nature. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) were performed for surface study of uninhibited and inhibited mild steel samples. The semi-empirical AM1 method was employed for theoretical calculations.     

Levels and effects of natural radionuclides in soil samples of Garhwal Himalaya

Distribution of natural radionuclide gives significant parameter to assess the presence of gamma radioactivity and its radiological effect in our environment. Natural radionuclides are present in the form of ²²⁶Ra, ²³²Th and ⁴⁰K in soil, rocks, water, air, and building materials. Distribution of natural radionuclides depends on the type of minerals present in the soil and rocks. For this purpose gamma spectrometer is used as tool for finding the concentration of these radionuclides. The activity concentration of naturally occurring radionuclides ²²⁶Ra, ²³²Th and ⁴⁰K in these soil samples were found to vary from of 8 ± 1 Bq/kg to 50 ± 10 Bq/kg with an average 20 Bq/kg, 7 ± 1–88 ± 16 Bq/kg with an Average 26 Bq/kg and 115 ± 18–885 ± 132 Bq/kg with an average 329 Bq/kg, respectively. In this paper, we are presenting the radiological effect due to distribution of natural radionuclide present in soil of Garhwal Himalaya.     

A detailed insight into the optimization of plate and frame heat exchanger design by comparing old and new generation metaheuristics algorithms

The voluminous utilization and application of plate and frame heat exchangers (PFHE) in many industries has accelerated the consumer and designer both to optimize exchanger total cost. Over the last few years, several old and new generation algorithms were employed and exploited to optimize PFHE cost. This study explores the application and performance of three new-generation algorithms Big Bang-Big Crunch (BBBC), Grey Wolf Optimizer (GWO), and Water Evaporation Optimization (WEO) in designing optimally PFHE. Besides, this study also compares the performance of three well-established old generations algorithms namely genetic algorithm (genetics and natural selection), particle swarm optimization (animals behaviour), and differential evolution (population-based) with the above three new algorithms in the optimization of PFHE.Seven design factors are chosen for PFHE optimization: exchanger length on hot and cold sides, height and thickness of fin, length of the fin-strip, fin frequency, and the number of hot side layers. The applicability of the suggested algorithms is assessed using a case study based on published research. Though DE performs the best in this study of design optimization concerning total cost and computational time, the three new-generation meta-heuristic algorithms BBBC, GWO, and WEO also provide the novel scope of application in heat exchanger design optimization and successfully finding the cost of the heat exchanger. According to this study, capital costs increase by 19.5% for BBBC, 24% for GWO, and 7.6% for GWO, but operational costs fall by 9.5% for BBBC and GWO when compared to the best performing algorithm (DE). On the other hand, WEO shows an increase of 32.6% in operational costs. Aside from that, a full analysis of the computing time for each algorithm is also provided. The DE has the quickest run time of 0.09 ?s, while the PSO takes the longest at 33.97 ?s. The rest of the algorithms have nearly identical values. As a result, a good comparison is established in this study, offering an excellent platform for designers and customers to make selections. Additionally, the three new generations algorithms mentioned here were not used earlier for optimization of PFHE and the comparative study illustrates that each of them possesses eat potential for cost optimization and also solving other complex problems.     

Multivariate statistical analysis approach to assess groundwater quality in two selected mandals of Vizianagaram district,Andhra Pradesh,India

Groundwater quality is the major concern all over the world. Natural processes and manmade activities are the prime reasons for the contamination of available water resources. It is crucial to assess the quality of groundwater in areas surrounded by various industries. The present study was carried out to assess the groundwater quality during pre-monsoon and post monsoon seasons of 2016, in two mandals of Vizianagaram district of Andhra Pradesh via multivariate statistical analysis and water quality index method. The present work gains importance in light of the construction of proposed international airport at Bhohapuram and the existence of various industries in Pusapatirega mandal. A total of thirty-seven villages, eighteen from Bhogapuram mandal and seventeen from Pusapatirega mandal were selected for the present study. Factor analysis, linear regression analysis, correlation matrix analysis and cluster analysis tools were used to emphasize the parameters influencing quality of water in the chosen study area. From the analysis reports, it was found that the groundwater of the two mandals under investigation was strongly influenced by EC, TDS, total hardness(TH), Ca⁺², Mg⁺² and K⁺. During the two seasons under study, the water quality index value was found to be greater than 100 indicating that the water is unfit for human consumption. Concentration of Ca⁺², Mg⁺² and K⁺ were found to be beyond the permissible limits prescribed by BIS (2012). Dissolution of calcium and magnesium bearing minerals, mixing of industrial and household wastes may be the reasons for elevated concentration levels of these parameters.