Studies on 1,10-Phenanthroline Complexes of Some Hydroxyaryltellurium Trihalides

The synthesis and structural features of some newly synthesized 1,10-phenanthroline complexes of p-hydroxyphenyl-and 3-methyl-4-hydroxyphenyltellurium trihalides (chlorides, bromides, and iodides) are reported. The resulting complexes have been subjected to elemental analyses, conductance and cryoscopic measurements, infra-red and proton magnetic resonance spectral studies. Solution studies reveal the weak to 1:1 electrolyte type behavior of these complexes in solution. Spectral studies indicate the linkage of phenanthroline to the tellurium atom through the nitrogen atoms. Central tellurium atom in these complexes is hexa-coordinated in an octahedral way.     

Structural designing,spectral and computational studies of bioactive Schiff's base ligand and its transition metal complexes

Transition metal complexes of Mn(II) and Ni(II) have been synthesized with novel bioactive Schiff's base ligand. Schiff's base ligand i.e. benzoylacetone‐bis(2‐amino‐4‐methylbenzothioazole) has been synthesized via condensation reaction between 2‐amino‐4‐methylbenzothioazole and benzoylacetone in 2:1 ratio, respectively. Synthesized ligand has been characterized using elemental analysis, infra‐red, ¹H–NMR and mass spectroscopy techniques. Characterization of complexes was based on magnetic moment, molar conductance, elemental analysis, electronic spectra, infra‐red and EPR spectroscopic techniques. Molar conductance data suggest that metal complexes are non‐electrolytic in nature. Therefore, these complexes are formulated as [M(L)X₂], where M = Mn(II), Ni(II), L = Schiff's base ligand, X = Cl^?, CH₃COO^?, NO₃^?. Data of characterization study suggest octahedral geometry for Mn(II) and Ni(II) complexes. Geometry of metal complexes was also optimized with the help of computational study i.e. molecular modelling. Computational study also suggests octahedral geometry for complexes. Free ligand as well as its all metal complexes have been screened against the growth of pathogenic bacteria (E.coli, S.aureus) and fungi (C.albicans, C.krusei, C.parapsilosis, C.tropicalis) to assess their inhibition potential. The inhibition data revealed that metal complexes exhibit higher inhibition potential against the growth of bacteria and fungi microorganisms than free ligand.     

Syntheses of 1,5-Benzothiazepines-Part XXXI: Syntheses and Antimicrobial Studies of 10-Substituted-7- (monochlorophenyl/dichlorophenyl)-6H-6a,7-dihydro-6-phenyl[1]benzopyrano[3,4-c]-[1,5]benzothiazepines

Abstract

Two flavindogenides, 3-(2-chlorobenzylidene)-flavanone and 3-(2,4-dichloro- benzylidene)-flavanone reacted with six 5-substituted-2-aminobenzenethiols, the substituents being fluoro, chloro, bromo, methyl, methoxyl, and ethoxyl, to give respective 12 new compounds, 10-substituted-7-(2-chlorophenyl/2,4-dichlorophenyl)- 6H-6a,7-dihydro-6-phenyl[1]benzopyrano[3,4?c][1,5]benzothiazepines (5a–l) in 60–70% yields. The products were characterized on the basis of microanalytical data for elements and IR, ¹ H, and ¹³ C NMR and mass spectral studies. All the synthesized compounds were evaluated for their antimicrobial activity against the bacteria,Escherichia coli and GFC,and the fungi,Aspergillus niger, Aspergillus flavus,and Curvularia lunata.     

Flow Through Diffusion Cell Method: A Better Approach to Study Drug Release Behavior as Compared to Traditional Dissolution Test Method

Co‐polymeric hydrogels consisting of N‐vinyl‐2‐pyrrolidone (NVP) and acrylic acid (AAc) were synthesized and evaluated for release of a model drug, i.e., vitamin B₁₂. Release studies in simulated gastric fluid (pH 1.2) and intestinal fluid (pH 7.4), at 37°C, showed the hydrogels to be pH sensitive. An in vitro release study by ‘traditional dissolution test’ (TDT) showed that percent drug released from the hydrogel was nearly 8.6±2.1 and 83.2±4.8 in the media of pH 1.2 and 6.8, respectively. However, in order to incorporate in vivo GI conditions such as acidic pH and high water content in the stomach, low water content and the presence of a semi–solid mass in the large intestine, a new test model, called flow through diffusion cell (FTDC) was also used. The two approaches yielded almost different release profiles. The gels were characterized by thermogravimetric analysis and FTIR spectroscopy.     

Stereoselective Bromination of 2-Vinyl Chromones Using NBS

A simple one-step synthetic methodology for stereoselective synthesis of E- and Z-3-bromo-2-vinyl chromones in quantitative yield in polar solvents under ambient conditions without the use of catalysts is reported.     

Gels dried under supercritical and ambient conditions: a comparative study and their subsequent conversion to silica–carbon composite aerogels

In present work, we have prepared gels with various compositions of methyltrimethoxysilane—3-(2,3-epoxypropoxy) propyltrimethoxysilane (MTMS-GPTMS) using a two-step acid base sol–gel process. To make a comparative study between the two common drying routes, we prepared gels under supercritical and also under ambient conditions. The density of the supercritically dried hybrid aerogels lies between 0.18 and 0.31 gcm^?3, while the density of the ambient dried ones ranges between 0.35 and 0.42 gcm^?3. The surface area of MTMS-0.25 GPTMS aerogel dried under supercritical conditions, has been found to be 464 m² g^?1 with a pore volume and average pore diameter of 1.24 cm³ g^?1 and 11 nm respectively. The same composition dried under ambient conditions is found to have similar properties i.e. a BET surface area of 439 m² g^?1, pore volume of 1.22 cm³ g^?1 and average pore diameter of 11 nm. The aerogels were later pyrolyzed yielding silica/carbon composite aerogels. The pyrolized aerogels possessed a surface area as high as 207 m² g^?1 with a total pore volume of 0.98 cm³ g^?1. The pyrolysed aerogels were also calcined to yield carbon free materials.     

A detailed insight into the optimization of plate and frame heat exchanger design by comparing old and new generation metaheuristics algorithms

The voluminous utilization and application of plate and frame heat exchangers (PFHE) in many industries has accelerated the consumer and designer both to optimize exchanger total cost. Over the last few years, several old and new generation algorithms were employed and exploited to optimize PFHE cost. This study explores the application and performance of three new-generation algorithms Big Bang-Big Crunch (BBBC), Grey Wolf Optimizer (GWO), and Water Evaporation Optimization (WEO) in designing optimally PFHE. Besides, this study also compares the performance of three well-established old generations algorithms namely genetic algorithm (genetics and natural selection), particle swarm optimization (animals behaviour), and differential evolution (population-based) with the above three new algorithms in the optimization of PFHE.Seven design factors are chosen for PFHE optimization: exchanger length on hot and cold sides, height and thickness of fin, length of the fin-strip, fin frequency, and the number of hot side layers. The applicability of the suggested algorithms is assessed using a case study based on published research. Though DE performs the best in this study of design optimization concerning total cost and computational time, the three new-generation meta-heuristic algorithms BBBC, GWO, and WEO also provide the novel scope of application in heat exchanger design optimization and successfully finding the cost of the heat exchanger. According to this study, capital costs increase by 19.5% for BBBC, 24% for GWO, and 7.6% for GWO, but operational costs fall by 9.5% for BBBC and GWO when compared to the best performing algorithm (DE). On the other hand, WEO shows an increase of 32.6% in operational costs. Aside from that, a full analysis of the computing time for each algorithm is also provided. The DE has the quickest run time of 0.09 ?s, while the PSO takes the longest at 33.97 ?s. The rest of the algorithms have nearly identical values. As a result, a good comparison is established in this study, offering an excellent platform for designers and customers to make selections. Additionally, the three new generations algorithms mentioned here were not used earlier for optimization of PFHE and the comparative study illustrates that each of them possesses eat potential for cost optimization and also solving other complex problems.     

Scalable bottom‐up assembly of suspended carbon nanotube and graphene devices by dielectrophoresis

Bottom‐up assembly by dielectrophoresis (DEP) has emerged in recent years as a viable alternative to conventional top–down fabrication of electronic devices from nanomaterials, particularly carbon nanotubes and graphene. Here, we demonstrate how this technique can be extended to fabricate devices containing carbon nanotubes and graphene suspended between two electrodes over a back‐gate electrode. The suspended device geometry is critical for the development of nano‐electromechanical devices and to extract maximum performance out of electronic and optoelectronic devices. This technique allows for parallel assembly of devices over large scale. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)