Carbonaceous nanomaterials immobilised mixed matrix membrane microextraction for the determination of polycyclic aromatic hydrocarbons in sewage pond water samples

In this study, the potential for carbonaceous nanomaterials to be used as adsorbents for the mixed matrix membrane (MMM) microextraction and preconcentration of organic pollutants was demonstrated. For this method, multiwall carbon nanotubes (MWCNT) and single layer graphene (SLG) nanoparticles were individually incorporated through dispersion in a cellulose triacetate (CTA) polymer matrix to form a MWCNT-MMM and SLG-MMM, respectively. The prepared membranes were evaluated for the extraction of selected polycyclic aromatic hydrocarbons (PAHs) present in sewage pond water samples. The extraction was performed by dipping a small piece of membrane (7 mm × 7 mm) in a stirred 7.5 mL sample solution to initiate the analyte adsorption. This step was followed by an analyte desorption into 60 μL of methanol prior to high performance liquid chromatography (HPLC) analysis. When the optimum SLG-MMM microextraction technique was applied to spiked sewage pond water samples, the detection limit of the method for the PAHs were in the range of 0.02–0.09 ng/mL, with relative standard deviations of between 1.4% and 7.8%. Enrichment factors of 54–100 were achieved with relative recoveries of 99%–101%. A comparison was also made between the proposed approach and standard solid phase extraction using polymeric bonded octadecyl (C₁₈) cartridges.     

Layered model of electrorheological fluid under flow

We present a theoretical model of the behavior of a concentrated electrorheological fluid (ERF) which explicitly takes into account the effects of conductivity. The increase in shear viscosity under an electric field is due to a layered structure between the electrodes, made up of the remnants of particle chains adhering to the electrodes by electrostatic image forces, and a freely flowing liquid layer where all the shear flow is concentrated. This layered model can explain the variation of electric current with shear rate, as well as the rheological response of a dynamic yield stress proportional to the square of the applied electric field.     

Electric Field Driven Extraction of Inorganic Anions Across a Polymer Inclusion Membrane

The potential use of plasticized cellulose acetate membranes for electric field driven extraction and preconcentration of inorganic anions was studied. The extraction of highly lipophilic ions such as perchlorate is possible by employing a membrane without any ion carrier, while anions of low lipophilicity, such as phosphate, require a carrier. Best extraction efficiency could be obtained for a membrane of 20 µm thickness and an applied voltage of 200 V. In a flow‐through arrangement the preconcentration factor was inversely dependent on the flow rate but constant for different concentrations. The extraction of perchlorate down to 2 nM was demonstrated.     

A lasing wavelength stabilized simultaneous multipoint acoustic sensing system using pressure-coupled fiber Bragg gratings

A fiber Bragg grating (FBG) sensor head, using a pressure coupling mechanism, was designed for broadband frequency response and structural strain-free characteristic. The pressure-coupled sensor heads were connected to a simultaneous multipoint acoustic sensing system based on a tunable laser. An intelligent lasing wavelength stabilization algorithm capable of identifying the direction of spectrum movement, the wavelength shifting speed, and a fiber bending event was developed so that the simultaneous multipoint acoustic sensing system could be used in environments with rapid temperature variations. The lasing wavelength feedback control algorithm updated the lasing wavelength into the steep slope of the FBG spectrum even under conditions of rapid temperature change. The averaging lasing wavelength updating time was only 21 s because the system can decide a minimal size in scan window by finding the FBG spectrum shifting speed and direction in real time. The system was able to update the lasing wavelength which missed the steep slope of the FBG spectrum under maximum temperature variation rates 0.3014 and −0.3246 °C/s. The proposed system detected simultaneous impact waves at multiple points under conditions of rapid temperature change and change in dynamic strain.     

Arrest of self-focusing collapse in femtosecond air filaments: higher order Kerr or plasma defocusing?

Experimentally measured conical emission rings on the blue side of the filament supercontinuum of a 800 nm 50 fs pulse in air are reproduced in simulations with plasma and the third-order Kerr as the nonlinear terms. This agreement indicates plasma as the dominant mechanism arresting the self-focusing collapse. The higher order Kerr terms with the recently measured coefficients stop the collapse at a lower intensity than the plasma does and lead to the spherical angle-wavelength spectrum without blueshifted rings.     

A General Palladium‐Catalyzed Method for Alkylation of Heteroarenes Using Secondary and Tertiary Alkyl Halides

A general alkylation of heterocycles using a simple palladium catalyst is reported. Most classes of heterocycles, including indoles and pyridines, efficiently coupled with unactivated secondary and tertiary alkyl halides. An alkyl radical addition to neutral heteroarenes is most likely involved.     

Field dependence of the response of a magnetorheological suspension under steady shear flow and squeezing flow

A comparison was made of the behaviour of a magnetorheological suspension under steady shear flow and constant velocity squeezing flow. The strain rates and sample dimensions were chosen to be comparable in the two deformation modes, and the dependence of the mechanical properties on the magnetic flux density B was investigated. The measurements found that the mechanical response under squeezing flow scaled as B^0.91, whereas the response under shearing scaled as B^1.4, close to theoretical predictions. This difference of the field dependence between the shearing and squeezing flows was possibly due to the different microstructural rearrangement processes which occur in the two deformation modes.     

Simultaneous determination of ofloxacin and ornidazole in pharmaceutical preparations by capillary zone electrophoresis

A simple, rapid and validated capillary electrophoretic method has been developed for the separation and determination of ofloxacin and ornidazole in pharmaceutical formulations with detection at 230 nm. Optimal conditions for the quantitative separations were investigated. Analysis times shorter than 4 min were obtained using a background electrolyte solution consisting of 25 mmol/L phosphoric acid adjusted with 1 m Tris buffer to pH 8.5, with hydrodynamic injection of 5 s and 20 kV separation voltage. The validation criteria for accuracy, precision, linearity and limits of detection and quantitation were examined and discussed. An excellent linearity was obtained in concentration range 25–250 µg/mL. The detection limits for ofloxacin and ornidazole were 1.03 ± 0.11 and 1.80 ± 0.06 µg/mL, respectively. The proposed method has been applied for the analysis of ofloxacin and ornidazole both individually and in a combined dosage tablet formulation. The proposed validated method showed recoveries between 96.16 and 105.23% of the nominal contents. Copyright © 2009 John Wiley & Sons, Ltd.     

Size-Selective Ionic Crosslinking Provides Stretchable Mixed Ionic–Electronic Conductors

Mechanically compliant conductors are of utmost importance for the emerging fields of soft electronics and robotics. However, the development of intrinsically deformable organic conductors remains a challenge due to the trade-off between mechanical performance and charge mobility. In this study, we report a solution to this issue based on size-selective ionic crosslinking. This rationally designed crosslinking mediated by length-regulated oligo(ethylene glycol) pendant groups and metal ions simultaneously improved the softness and toughness and ensured excellent mixed ionic–electronic conductivity in poly(3,4-ethylenedioxythiophene):polystyrene sulfonate composite materials. Moreover, the added ions remarkably promoted accumulation of charge carriers in response to temperature gradient, thus offering a viable approach to stretchable thermoelectric generators with enhanced stability against humidity.