Ab initio and density functional computations of the vibrational spectrum, molecular geometry and some molecular properties of the antidepressant drug sertraline (Zoloft) hydrochloride

Sertraline hydrochloride is a highly potent and selective inhibitor of serotonin (5HT). It is a basic compound of pharmaceutical application for antidepressant treatment (brand name: Zoloft). Ab initio and density functional computations of the vibrational (IR) spectrum, the molecular geometry, the atomic charges and polarizabilities were carried out. The infrared spectrum of sertraline is recorded in the solid state. The observed IR wave numbers were analysed in light of the computed vibrational spectrum. On the basis of the comparison between calculated and experimental results and the comparison with related molecules, assignments of fundamental vibrational modes are examined. The X-ray geometry and experimental frequencies are compared with the results of our theoretical calculations.     

Electrochemical Analysis of Liposome-encapsulated Colistimethate Sodium

In this study, the neutral and cationic liposomal formulations of Colistimethate sodium (CMS), an antibiotic for multi-drug resistant gram-negative bacteria, were prepared and electrochemical quantification of CMS from these liposomes were achieved. This is the first study of the electrochemical detection of CMS released from liposomes. First, the electrochemical properties of CMS were analysed, then the encapsulation efficiency, and the release kinetic of CMS from liposomes were determined with Differential Pulse Voltammetry (DPV) measurements. In addition, Cyclic Voltammetry were applied to determine oxidation signal of CMS. A higher encapsulation efficiency was found in the cationic liposome compared to the neutral liposome. Moreover, CMS was controlled released from liposomes with zero-order drug release kinetics.     

Synthesis, IR spectral studies and quantum-chemical calculations on 1,2-dihydronaphto[1,2-e]oxazine-3-thiones and 3,4-dihydrobenzo[e][1,3]oxazine-2-thione

2-Hydroxy-1-naphthaldehyde (1) was reacted with substituted anilines to afford 1-(substituted phenyliminomethyl)naphthalen)-2-ols (2). The reduction of these imines by NaBH₄ gave 1-((substituted phenylaminomethyl)naphthalen)-2-ols (3) which were cyclized with thiophosgene to give corresponding 2-substituted phenyl-1,2-dihydronaphto[1,2-e]oxazine-3-thiones (4). 3-p-Tolyl-3,4-dihydrobenzo[e][1,3]oxazine-2-thione (8) was also obtained by the same way. The structures of these new compounds were determined by ¹H NMR, IR spectroscopic data and elemental analyses. AM1, PM3 and ab initio (at Hartree–Fock level with 3-21G basis set) methods were used to study the molecular geometry of the compounds. A complete infrared spectral analysis of the oxazines has been performed in this paper. Observed frequencies of the molecules were compared with calculated normal mode analysis which was carried out on the basis of RHF/3-21G method. Assignments of vibrational bands (in the range of 1760–400 cm⁻¹) have been performed by taking into account the results of the ab initio vibrational analysis. The mechanism of the cyclization reaction between (3a) and thiophosgene was studied by the semi-empirical AM1 and ab initio (RHF) calculations.     

Development of reactive phosphonated methacrylates

Five novel phosphonated mono‐ and dimethacrylate monomers have been synthesized by two different routes. Monomers 1 and 2 were synthesized by reactions of methacryloyl chloride with diethyl (2‐hydroxyphenyl) phosphonate or tetraethyl (2,5‐dihydroxy‐1,4‐phenylene) bisphosphonate; monomers 3 and 4 by reactions of α‐(chloromethyl)acryloyl chloride (CMAC) first with dimethyl (2‐hydroxyethyl) phosphonate and then with benzoic or formic acids. The reaction of CMAC with two moles of dimethyl (2‐hydroxyethyl) phosphonate gave monomer 5 . Thermal homopolymerization of monomers 1 , 3 , 4 , and 5 and copolymerization of monomer 1 with methyl methacrylate (MMA) were investigated using azobisisobutyronitrile (AIBN) at 60 °C. Glass transition temperatures were observed for poly‐ 1 , poly(MMA‐co‐ 1 ) (50:50), poly(MMA‐co‐ 1 ) (90:10), PMMA, poly‐ 3 , and poly‐ 5 at 52, 90, 99, 129, 50, and 70 °C, respectively. TGA analysis of these polymers indicated formation of char on combustion. Homo‐ and/or copolymerization behavior of the synthesized monomers with 2,2‐bis[4‐(2‐hydroxy‐3‐methacryloyloxy propyloxy) phenyl] propane (Bis‐GMA) were investigated with photodifferential scanning calorimetry. The maximum rate of polymerizations decreased in the following order: Bis‐GMA～ 3 > 1 > 4 > 5 . The conversions of monomers 1 , 3 , 4 , and 5 (73.9, 85.9, 98.2, and 62.2%) were very high compared with Bis‐GMA (40.5%). © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5737–5746, 2009     

π-Extended and six-coordinate iron(II) complexes: structures, magnetic properties, and the electrochemical synthesis of a conducting iron(II) metallopolymer

Herein, we describe the preparation of three new bidentate π-extended derivatives of the ligand N-phenyl-2-pyridinalimine (ppi) containing a 3-thienyl (4) substituent at position 4 of the aniline ring or 2-thienyl (6) or phenyl (2) substituents at each of the 2,5 positions of the aniline rings. Three iron(2+) complexes (7-9) containing these ligands were prepared by combining two equivalents each of 2, 4, or 6 with Fe(NCS)(2), and the resulting neutral, six-coordinate complexes were fully characterized, including with single crystal X-ray diffraction experiments in the case of complexes 7 and 9. Variable temperature magnetic susceptibility and Mo?ssbauer experiments confirm the presence of spin-crossover in complexes 7 and 8, and the unusual solid state variable temperature magnetic properties of complex 9 likely result from crystal packing forces. Electropolymerization of the 2,5-dithienyl-substituted complex (9) produces a conducting and electrochromic metallopolymer film (poly-9).     

Benzene-1,3,5-tricarboxamide: a versatile ordering moiety for supramolecular chemistry

After their first synthesis in 1915 by Curtius, benzene-1,3,5-tricarboxamides (BTAs) have become increasingly important in a wide range of scientific disciplines. Their simple structure and wide accessibility in combination with a detailed understanding of their supramolecular self-assembly behaviour allow full utilization of this versatile, supramolecular building block in applications ranging from nanotechnology to polymer processing and biomedical applications. While the opportunities in the former cases are connected to the self-assembly of BTAs into one-dimensional, nanometer-sized rod like structures stabilised by threefold H-bonding, their multivalent nature drives applications in the biomedical field. This review summarises the different types of BTAs that appeared in the recent literature and the applications they have been evaluated in. Currently, the first commercial applications of BTAs are emerging. The adaptable nature of this multipurpose building block promises a bright future.     

Ligand-Based Reduction of CO(2) and Release of CO on Iron(II)

A synthetic cycle for the CO(2)-to-CO conversion (with subsequent release of CO) based on iron(II), a redox-active pydridinediimine ligand (PDI), and an O-atom acceptor is reported. This conversion is a passive-type ligand-based reduction, where the electrons for the CO(2) conversion are supplied by the reduced PDI ligand and the ferrous state of the iron is conserved.     

Synthesis and morphological characterization of poly(ϵ-caprolactone) and poly(2-methyloxazoline) substituted phenyl rings and phenylene oligomers

Poly(ϵ-caprolactone) (PCL) and poly(2-methyloxazoline) (POx) substituted phenyl rings (macromonomers) and the corresponding substituted polyphenylene oligomers have been synthesized in various chemical structures. Macromonomers were synthesized by ring opening polymerization. Poly(phenylene) oligomers were then synthesized by cross-coupling of the macromonomers in Ni-catalyzed polycondensation reactions. The macromonomers and oligomers have been characterized by ¹H-NMR, IR, GPC, and DSC. The effect of side chain chemistry and architecture on the resulting morphology in thin films has been investigated by atomic force micro-scopy and wide angle X-ray scattering. Polyphenylene oligomers showed layered morphologies in thin films. The orientation of the layers depended on the chemistry of the side chains and the backbone architecture. Linear oligomers containing statistically distributed segments having POx or PCL side chains showed layers perpendicular to the underlying substrate. Attachment of polystyrene end block to PCL chain together with the meta-connectivity of the backbone resulted in layers parallel to the substrate. Our results also indicate that substitution of polymeric chains to phenyl rings can induce ordered structures of macromonomers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2091–2104, 2007