In Situ Investigations of Mechanochemical One‐Pot Syntheses

We present an in situ triple coupling of synchrotron X‐ray diffraction with Raman spectroscopy, and thermography to study milling reactions in real time. This combination of methods allows a correlation of the structural evolution with temperature information. The temperature information is crucial for understanding both the thermodynamics and reaction kinetics. The reaction mechanisms of three prototypical mechanochemical syntheses, a cocrystal formation, a C?C bond formation (Knoevenagel condensation), and the formation of a manganese‐phosphonate, were elucidated. Trends in the temperature development during milling are identified. The heat of reaction and latent heat of crystallization of the product contribute to the overall temperature increase. A decrease in temperature occurs via release of, for example, water as a by‐product. Solid and liquid intermediates are detected. The influence of the mechanical impact could be separated from temperature effects caused by the reaction.     

Selective C(sp3)−H Aerobic Oxidation Enabled by Decatungstate Photocatalysis in Flow

A mild and selective C(sp³)?H aerobic oxidation enabled by decatungstate photocatalysis has been developed. The reaction can be significantly improved in a microflow reactor enabling the safe use of oxygen and enhanced irradiation of the reaction mixture. Our method allows for the oxidation of both activated and unactivated C?H bonds (30 examples). The ability to selectively oxidize natural scaffolds, such as (?)‐ambroxide, pregnenolone acetate, (+)‐sclareolide, and artemisinin, exemplifies the utility of this new method.     

Solid-phase synthesis of an apoptosis-inducing tetrapeptide mimicking the Smac protein

An approach for the solid-phase synthesis of apoptosis-inducing Smac peptidomimetics is presented. Using a Rink linker strategy, tetrapeptides mimicking the N-4-terminal residue of the Smac protein [(N-Me)AVPF sequence] were synthesized on PEGA resin in excellent purities and yields. Following two synthetic routes, a known tetrapeptide, incorporating a substituted proline, previously shown to exhibit excellent biological activity in vitro as well as low toxicity, was synthesized effectively on a solid support.     

Phosphatidylcholine dimers can be easily misinterpreted as cardiolipins in complex lipid mixtures: a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometric study of lipids from hepatocytes

The liver is an important organ that is particularly involved in the lipid metabolism of the organism. Thus, high interest is nowadays focused on the lipid composition of the liver and particularly the liver parenchymal cells, the hepatocytes. Hepatocytes contain common phospholipids (PL) such as phosphatidylcholines, ‐ethanolamines and ‐inositols, for instance, that can be easily analyzed by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) even without previous separation of the PL mixture. However, in addition to common PL, hepatocytes possess also significant amounts of cardiolipin (CLP). The MS analysis of this PL is quite challenging because it (a) has a higher mass than common lipids and (b) possesses a higher negative charge. We will show here that caution is required if CLP is analyzed directly from the total lipid extract because PC dimers may be interpreted as cardiolipins if the positive ion MALDI mass spectra are analyzed. Copyright © 2011 John Wiley & Sons, Ltd.     

Gated channels in a honeycomb-like zinc-dicarboxylate-bipyridine framework with flexible alkyl ether side chains

Covalent functionalization of 1,4-benzenedicarboxylate (bdc) with methoxyethoxy groups induces conformational freedom in this molecule. Applying these 2,5-disubstituted bdc derivatives in metal-organic framework synthesis together with 4,4'-bipyridine as coligand yields novel honeycomb-like structures. The cylindrical channels of these materials are populated with flexible groups, which act as molecular gates for guest molecules. This allows highly selective sorption of CO(2) over N(2) and CH(4).     

Rapidly renewable silver amalgam annular band electrode for voltammetry and polarography

This work describes a novel type of working electrode for use in voltammetry and polarography — the renewable silver liquid amalgam film–modified silver solid amalgam annular band electrode (AgLAF–AgSAE). The electrode is produced by mechanically refreshing the silver liquid amalgam film (AgLAF) before each measurement. The main constituents of the electrode are: a specially constructed silver solid amalgam annular band electrode (AgSAE), two silicon O-rings, silver liquid amalgam and a polypropylene electrode body. Contaminants from the analyzed solution are removed and the AgSAE surface is covered with a thick layer of fresh amalgam while pulling the AgSAE into the sensor body. During movement in the reverse direction AgLAF is formed and homogenized. The time needed to refresh the film is less than 1 s. The electrode is characterized by excellent surface repeatability (～ 1%) and long-term stability (over ten thousand measurement cycles).     

Dendritic aliphatic polyethers as high-loading soluble supports for carbonyl compounds and parallel membrane separation techniques

This paper describes the use of dendritic polyglycerol as a new high-loading polymeric support. The soluble polyether skeleton allows the parallel synthesis of small libraries on a large scale (1-5 mmol). Purification of polymer-bound products is easily achieved by a parallel dialysis apparatus, which was developed to separate up to 12 reaction mixtures simultaneously. The terminal 1,2-diol groups of polyglycerol (loading capacity: 4.1 mmol diol/g) can be directly coupled with carbonyl compounds without additional linker groups. At the same time the polyglycerol support acts as a polymeric ketal protecting group. The coupling of the carbonyl compounds occurs in high yields, and effective loading capacities of up to 3.5 mmol of ketone/g can be reached. The obtained polymeric acetals can easily be characterized by standard analytical techniques, such as NMR, IR, UV, and SEC. The versatility of this new polymeric support for solution-phase organic synthesis is demonstrated by two efficient polymer-supported syntheses: nucleophilic substitutions of gamma-chloroketones with amines and Suzuki-coupling on p-bromobenzaldehyde. The acid-catalyzed acetal cleavage with a solid-phase acidic ion-exchange resin in methanol demonstrates the orthogonal use of these soluble polymeric supports with conventional solid-phase reagents. Cleavage of products occurs in high yields, and almost complete recovery (>95%) of the polyglycerol support has been demonstrated after phase separation or ultrafiltration.     

Production of Siderophores by an Apple Root-Associated Streptomyces ciscaucasicus Strain GS2 Using Chemical and Biological OSMAC Approaches

Apple Replant Disease (ARD) is a significant problem in apple orchards that causes root tissue damage, stunted plant growth, and decline in fruit quality, size, and overall yield. Dysbiosis of apple root-associated microbiome and selective richness of Streptomyces species in the rhizosphere typically concurs root impairment associated with ARD. However, possible roles of Streptomyces secondary metabolites within these observations remain unstudied. Therefore, we employed the One Strain Many Compounds (OSMAC) approach coupled to high-performance liquid chromatography-high-resolution tandem mass spectrometry (HPLC-HRMSⁿ) to evaluate the chemical ecology of an apple root-associated Streptomyces ciscaucasicus strain GS2, temporally over 14 days. The chemical OSMAC approach comprised cultivation media alterations using six different media compositions, which led to the biosynthesis of the iron-chelated siderophores, ferrioxamines. The biological OSMAC approach was concomitantly applied by dual-culture cultivation for microorganismal interactions with an endophytic Streptomyces pulveraceus strain ES16 and the pathogen Cylindrocarpon olidum. This led to the modulation of ferrioxamines produced and further triggered biosynthesis of the unchelated siderophores, desferrioxamines. The structures of the compounds were elucidated using HRMSⁿ and by comparison with the literature. We evaluated the dynamics of siderophore production under the combined influence of chemical and biological OSMAC triggers, temporally over 3, 7, and 14 days, to discern the strain’s siderophore-mediated chemical ecology. We discuss our results based on the plausible chemical implications of S. ciscaucasicus strain GS2 in the rhizosphere.