Integrated biological–chemical approach for the isolation and selection of polyaromatic mutagens in surface waters

Many environmental mutagens, including polyaromatic compounds are present in surface waters, often in complex mixtures and at low concentrations. The present study provides and applies a novel, integrated approach to isolate polyaromatic mutagens in river water using a sample from the River Elbe. The sample was taken downstream of industrial discharges using blue rayon (BR) as a passive sampler that selectively adsorbs polyaromatic compounds and was subjected to effect-directed fractionation in order to characterise the compounds causing the detected effect(s). The procedure relies on three complementary fractionation steps, the Ames fluctuation assay with strains TA98, YG1024 and YG1041 with and without S9 activation and analytical screening. Several mutagenic fractions were isolated by combining mutagenicity testing with fractionation. The enhanced mutagenicity in the nitroreductase and/or O-acetyltransferase overexpressing strains YG1024 and YG1041 strains suggested amino- and/or nitro-compounds causing mutagenicity in several fractions. Analytical screening of mutagenic fractions with LC-HRMS/MS provided a list of molecular formulas typically containing one to ten nitrogen and at least two oxygen atoms supporting the presence of amino and nitro-compounds in the mutagenic fractions.

Unexpected electron transfer in cryptochrome identified by time-resolved EPR spectroscopy

Subtle differences in the local sequence and conformation of amino acids can result in diversity and specificity in electron transfer (ET) in proteins, despite structural conservation of the redox partners. For individual ET steps, distance is not necessarily the decisive parameter; orientation and solvent accessibility of the ET partners, and thus the stabilization of the charge-separated states, contribute substantially.     

Crystalline Divinyldiarsenes and Cleavage of the As=As Bond

The first divinyldiarsenes [{(NHC)C(Ph)}As]₂ (NHC=IPr 3 a , SIPr 3 b ; IPr=C{(NAr)CH}₂; SIPr=C{(NAr)CH₂}₂; Ar=2,6-iPr₂C₆H₃) are reported. Compounds 3 a and 3 b were prepared by the reduction of corresponding chlorides {(NHC)C(Ph)}AsCl₂ (NHC=IPr 2 a , SIPr 2 b ) with Mg. Calculations revealed a small HOMO–LUMO energy gap of 3.86 ( 3 a ) and 4.24 eV ( 3 b ). Treatment of 3 a with (Me₂S)AuCl led to the cleavage of the As=As bond to restore 2 a , which is expected to proceed via the diarsane [{(IPr)C(Ph)}AsCl]₂ ( 4 ). Remarkably, 4 as well as 2 a can be selectively accessed on treatment of 3 a with an appropriate amount of C₂Cl₆. Moreover, 3 a readily reacts with PhEEPh (E=Se or Te) at room temperature to give {(IPr)C(Ph)}As(EPh)₂ (E=Se 5 a ; Te 5 b ), revealing the cleavage of As=As and E−E bonds and the formation of As−E bonds. Such highly selective stepwise oxidation ( 3 a → 4 → 2 a ) and bond metathesis ( 3 a → 5 a , b ) reactions are unprecedented in main-group chemistry.     

Twisting the TAPPs: Bay-Substituted Non-planar Tetraazapero-pyrenes and their Reduced Anions

A new synthesis of tetraazaperopyrenes (TAPPs) starting from a halogenated perylene derivative 3,4,9,10- tetrabromo-1,6,7,12-tetrachloroperylene ( 1 ) gave access to bay-substituted TAPPs for the first time. Selective lithiation of the bromine-positions and subsequent addition of tosyl azide led to the formation of the tetraazidotetrachloroperylene ( 2 ), which was subsequently reduced by addition of sodium borohydride to the corresponding tetraaminotetrachloroperylene ( 3 ). Oxidation to its semiquinoidal form 4 and subsequent cyclization with acid chlorides gave rise to a series of bay-chlorinated TAPPs. Whereas the aromatic core of the previously studied ortho-substituted TAPPs was found to be planar, the steric pressure of the two chlorine substituents on each side leads to the twist of the peropyrene core of approximately 30 degrees, a structural feature also observed in other bay-substituted perylene derivatives. An experimental and computational analysis reveals that introducing chloride substituents at these positions leads to slightly increased electron affinities (EA) enabling the selective generation and characterization of the reduced mono-anionic radicals and closed shell di-anionic species. These anions were isolated and characterized by UV/Vis spectroscopy and EPR or NMR, respectively. Processing of the bay-chlorinated TAPPs in n-channel organic TFTs revealed electron mobilities of 0.001 to 0.003 cm² V⁻¹ s⁻¹. These reduced electron mobilities compared to the ortho-halogenated TAPPs are thought to be rooted in the less densely packed solid-state structures.     

N-Acenoacenes

The syntheses of new, fourfold alkynylated tetraazaacenoacenes (tetraazaanthracenoanthracene, tetraazatetracenotetracene and tetraazapentacenopentacene) are reported. This novel heteroacenoacene motif exhibits surprisingly strong electronic coupling between its constituting diazaacene units.     

Nylon Intermediates from Bio‐Based Levulinic Acid

Use of ZrO₂/SiO₂ as a solid acid catalyst in the ring‐opening of biobased γ‐valerolactone with methanol in the gas phase leads to mixtures of methyl 2‐, 3‐, and 4‐pentenoate (MP) in over 95 % selectivity, containing a surprising 81 % of M4P. This process allows the application of a selective hydroformylation to this mixture to convert M4P into methyl 5‐formyl‐valerate (M5FV) with 90 % selectivity. The other isomers remain unreacted. Reductive amination of M5FV and ring‐closure to ?‐caprolactam in excellent yield had been reported before. The remaining mixture of 2‐ and 3‐MP was subjected to an isomerising methoxycarbonylation to dimethyl adipate in 91 % yield.     

Control of Metal–Organic Framework Crystallization by Metastable Intermediate Pre‐equilibrium Species

There is an increasing amount of interest in metal–organic frameworks (MOFs) for a variety of applications, from gas sensing and separations to electronics and catalysis. However, the mechanisms by which they crystallize remain poorly understood. Herein, an important new insight into MOF formation is reported. It is shown that, prior to network assembly, crystallization intermediates in the canonical ZIF‐8 system exist in a dynamic pre‐equilibrium, which depends on the reactant concentrations and the progress of reaction. Concentration can, therefore, be used as a synthetic handle to directly control particle size, with potential implications for industrial scale‐up and gas sorption applications. These findings enable the rationalization of apparent contradictions between previous studies of ZIF‐8 and opens up new opportunities for the control of crystallization in network solids more generally.     

Steigerung der Wasseroxidation durch In‐situ‐Elektrokonversion eines Mangangallids: Ein intermetallischer Vorläuferansatz

Erstmals wurden, in einen intermetallischen Vorläuferansatz, durch In‐situ‐Elektrokonversion von Mangangallid (MnGa₄) hochleistungsfähige und langzeitstabile MnO_x‐basierte Elektrokatalysatoren für die Wasseroxidation in alkalischem Medium hergestellt. Überraschend führt seine Elektrokorrosion, unter gleichzeitigem Verlust von Ga, gleichzeitig zu drei kristallinen Typen von MnO_x‐Mineralien mit verschiedenen Strukturen und induzierten Defekten: Birnessit δ‐MnO₂, Feitknechtit β‐MnOOH und Hausmannit α‐Mn₃O₄. Das Vorkommen und die intrinsische Stabilität von aktiven Mn^III/Mn^IV‐Zentren in den drei gebildeten MnO_x‐Phasen erklärt die hervorragende Effizienz und Stabilität des Systems für die elektrokatalytische Wasseroxidation. Nach der elektrophoretischen Abscheidung des MnGa₄‐Vorläufers auf elektrisch leitfähigem Nickelschaum wurde ein niedriges Überpotential von 291 mV bei der Stromdichte von 10 mA cm^?2 erreicht, das praktisch den Überpotentialen von edelmetallbasierten Katalysatoren entspricht und für mehr als fünf Tage beständig ist.     

Mechanistic Divergence in the Hydrogenative Synthesis of Furans and Butenolides: Ruthenium Carbenes Formed by gem‐Hydrogenation or through Carbophilic Activation of Alkynes

Enynes with a tethered carbonyl substituent are converted into substituted furan derivatives upon hydrogenation using [Cp*RuCl]₄ as the catalyst. Paradoxically, this transformation can occur along two distinct pathways, each of which proceeds via discrete pianostool ruthenium carbenes. In the first case, hydrogenation and carbene formation are synchronized (“gem‐hydrogenation”), whereas the second pathway comprises carbene formation by carbophilic activation of the triple bond, followed by hydrogenative catalyst recycling. Representative carbene intermediates of either route were characterized by X‐ray crystallography; the structural data prove that the attack of the carbonyl group on the electrophilic carbene center follows a Bürgi–Dunitz trajectory.