1.5-Diaza-3.7-diphospha-cyclooctane

The alkyl (aryl)-bishydroxymethylphosphines react with primary amines to give the title compounds. With optically active amines optically active phosphines are formed.     

Über die Umsetzung von 2-Methyl-2,5-diphenyl-imidazolin-4-thion und 2-Methyl-2,5-diphenyl-4-chlor-2H-imidazol mit aliphatischen und aromatischen Aminen,Alkoholen und Phenolen

Zusammenfassung Aliphatische Amine bzw. Alkohole reagiren (in Gegenwart von PbO) mit 2-Methyl-2,5-diphenyl-imidazolin-4-thion (1) glatt zu 4-Alkylamino-2H-imidazolen (2 a-f, 7) bzw. 4-Alkoxy-2H-imidazolen (9 a-g). Die Darstellung von 4-Arylamino-2H-imidazolen (4 a-j) bzw. 4-Aroxy-2H-imidazolen (10 a-t) gelingt in guten Ausbeuten durch Umsetzung von 2-Methyl-2,5-diphenyl-4-chlor-2H-imidazol (3) mit aromatischen Aminen in siedenden Lösungsmitteln (Petroläther, Aceton) bzw. mit Phenolen in siedendem Aceton in Gegenwart von HCl-Acceptoren (K₂CO₃, Dabco). Die Umsetzung von3 mit Anthranilsäure liefert in 83proz. Ausbeute 1-Methyl-1,3-diphenyl-1H, 9H-imidazo[5,1-b]chinazolin-9-on (6). Aus3 und Thiophenol erhält man glatt 2-Methyl-2,5-diphenyl-4-phenylthio-2H-imidazol (11).

---

On the reaction of 2-Methyl-2,5-diphenyl-imidazoline-4-thione and 2-Methyl-2,5-diphenyl-4-chloro-2H-imidazole with aliphatic and aromatic amines, alcohols and phenols (joint action of elemental sulfur and gaseous ammonia upon ketones, LXXVI

Aliphatic amines and alcohols (in the presence of PbO) easily react with 2-methyl-2.5-diphenyl-imidazoline-4-thione (1) to 4-alkylamino-2H-imidazoles (2 a-f, 7) and 4-alkoxy-2H-imidazoles (9 a-g), resp. 4-arylamino-2H-imidazoles (4 a-j) are prepared in good yields by the reaction of 2-methyl-2.5-diphenyl-4-chloro-2H-imidazole (3) with aromatic amines under reflux in light naphtha or acetone; in the same manner 4-aroxy-2H-imidazoles (10 a-t) are obtained from3 and phenols in boiling acetone in the presence of HCl-acceptors (K₂CO₃, Dabco). Reaction of3 with anthranilic acid leads to1-methyl-1.3-diphenyl-1H.9H-imidazo[5.1-b]chinazoline-9-one (6) in 83% yield. By reaction of thiophenol with3 2-methyl-2.5-diphenyl-4-phenylthio-2H-imidazole (11) is easily obtained.

---

---

Herrn Prof. Dipl.-Ing., Dr. techn., Dr. e. h.Otto Kratky zum 70. Geburtstag herzlichst gewidmet.

---

Teil der DiplomarbeitJ. Gräber, Techn. Hochschule Aachen, 1970.

---

Teil der DiplomarbeitU. Lames, Techn. Hochschule Aachen, 1971.     

Quantitative analysis of 3-indoleacetic acid and serotonin by in situ fluorescence on thin-layer chromatograms

Summary The characterization and quantitation of indoles by thin-layer chromatography followed by fluorometric scanning of the chromatographed species on the thin-layer provides a rapid and sensitive method of analysis at theg level and lower. Considerable increases in fluorescence intensity may be achieved if the plate is sprayed with a polar compound such as dimethylsulfoxide prior to measurement. The method may be used to quantitatively determine directly 50 ng samples of serotonin and indoleacetic acid and should be equally sensitive for other indolic compounds. The analysis of biological extracts for low levels of indoles should be a particular application for the method.

---

Zusammenfassung Die Charakterisierung und Bestimmung von Indolen durch Dünnschicht-chromatographie und nachfolgende Fluoreszenzmessung der chromatographierten Substanzen auf der Dünnschichte erfordert eine rasche und empfindliche Analysenmethode für die Größenordnung von Mikrogramm und darunter. Eine erhebliche Verstärkung der Fluoreszenz läßt sich durch Sprühen mit einer polaren Verbindung wie z. B. Dimethylsulfoxid erreichen. Diese Bestimmungsmethode eignet sich für die direkte Bestimmung von 50 ng Serotonin und Indolessigsäure und dürfte auch für andere Indolderivate gleich empfindlich sein. Insbesondere Extrakte biologischen Materials dürften sich zur Analyse anbieten.

     

Photostability and thermal stability of indocyanine green

The photo-fading of the S0-S1 absorption band of the infrared dye indocyanine green sodium iodide (ICG-NaI) has been studied by cw laser excitation to the S1 band. Monomeric solutions in water, heavy water, aqueous sodium azide, human plasma, methanol and dimethyl sulfoxide (DMSO) as well as J-aggregated solutions in H2O and D2O have been investigated. A leucoform of indocyanine green seems to be formed by photodegradation. The degradation slows down with exposure time. The initial degradation yield, phi D,0, is determined. In monomeric and dimeric water, heavy water and sodium azide solutions the initial photostability is of the order of phi D.0 approximately 10(-3), in the organic solvents methanol and DMSO it is of the order of phi D.0 approximately 10(-5), and in human plasma it is phi D.0 approximately 2 x 10(-6). J-aggregates at high concentration are very stable. The thermal stability of the ICG-NaI solutions at room temperature in the dark is compared with their photostability. The thermal degradation time of monomeric and dimeric ICG-NaI in water, heavy water and sodium azide solutions is t(th) approximately 10 days, while no thermal degradation is observed for ICG-NaI J-aggregates and ICG-NaI in methanol, DMSO and human plasma.     

Influence of Cycle Temperatures on the Thermochemical Heat Storage Densities in the Systems Water/Microporous and Water/Mesoporous Adsorbents

The adsorption equilibrium of water on microporous adsorbents (zeolites of NaA-, NaY- and NaX-type as well as their ion exchanged forms) and on mesoporous adsorbents (different silica gels and composite material i.e. silica gel + salt hydrate) has been studied experimentally and theoretically. Using the Dubinin theory of pore filling the characteristic curves of the adsorption systems and other relevant dependences such as isotherms, isobars, isosteres and the curve of the differential heat of adsorption were calculated. For all systems investigated the adsorption were calculated. A_ads and the desorption potential A_des of the closed heat storage system were estimated. These values define the working range of the adsorption/desorption cycle and allow to calculate the specific heat storage density Δ h_sp. On the basis of Δ h_sp the different adsorbents were compared in order to select the optimal porous storage material for a given application. The presented experimental and theoretical investigations show that the adsorption systems water-zeolite and water-composites are promising working pairs for thermochemical heat storage processes for hot tap water supply and space heating of single family dwellings. The advantage of the water-composite system is the low desorption temperature (solar energy) the main shortcoming the low temperature lift. The advantage of the water zeolite system is the high temperature lift, the shortcoming are the relative high desorption temperatures.     

Silacyclohexadienylanionen bis- und tris-trimethylsilyl)-silacyclohexadiene

1,1-Dialkyl(1,1-diaryl)-4-R-1-silacyclohexadienyl anions (1) are available by ether cleavage of the corresponding, 1,1-dialkyl(1,1-diaryl)-4-methoxy-4-R-1-silacyclohexa-2,5-dienes (4), or by deprotonation of the 1,1-dialkyl(1,1-diaryl)-4-R-1-silacyclohexa-2,4-dienes (3) - which are available from 4 - with n-BuLi or LDA resp.The anions 1 are regioselectively silylated by trimethylchlorosilane to give the 6-trimethylsilyl-1-silacyclohexa-2,4-dienes (7,8), their alkylation or acylation occurs exclusively in 4-position to 16 or 17 resp.Deprotonation of 7, 8 with n-BuLi gives the 2-trimethylsilyl-1-silacyclohexadienyl (9), with trimethylchlorosilane they react regioselectively to give the 2,6-bis(trimethylsilyl)-1-silacyclohexa-2,4-dienes (10, 11), with alkyl halides and ketones the anion 9 reacts only in the 4-position.The 1-silacyclohexa-2,5-dienes 22, 25, 28 substituted at the silicon atom by functional groups (O-i-Prop) or by hydrogen can be transformed into 2,6-bis(trimethylsilyl)-1-silacyclohexa-2,4-dienes 24, 27, 33 resp., if LDA is used as base.The easily formed 4-R-2,6-bis(trimethylsilyl)-1-silacyclohexa-2,4-dienyl anions (by deprotonation of 10, 11, 24, 27, 33 with LDA) react with trimethylchlorosilane regioselectively to give the 4-R-2,4,6-tris(trimethylsilyl)-1-silacyclohexa-2,5-dienes 37. Accessing 37 succeeds very simply by manifold-silylation of the 1-sila-2,4-cyclohexadienes 38 with excess trimethylchlorosilane in the presence of 3 mol LDA.Owing to trimethylsilyl substitution in the 2,6-position of the 1-silacyclohexa-2,4-dienes, the ring-silicon atom is strongly sterically shielded, therefore reactions of functional groups at the silicon atom are restricted.     

Synthesis of a silk-inspired peptide-oligothiophene conjugate

The first example of an oligothiophene-peptide conjugate, which was obtained by solid-phase acylation of a resin-bound silk-inspired oligopeptide sequence with a carboxylic acid functionalized regioregular tetra(3-hexylthiophene) derivative, is reported.     

On-line coupled liquid chromatography-gas chromatography

On-line coupled liquid chromatography–gas chromatography (LC–GC) is a powerful technique that combines the best features of LC and GC and is ideal for the analysis of complex samples. This review describes the unique features of on-line coupled LC–GC. The different interfaces and evaporation techniques are presented, along with their advantages and disadvantages. Guidelines are given for selecting a suitable LC–GC technique and representative applications are noted.     

Autocollimation spectroscopy for fast hydrogenic ions

We propose a new experimental method (Autocollimation Spectroscopy), which provides a strong suppression of systematic error contributions in the laser resonance spectroscopy of broad resonances. Using a bidirectional laser beam with a fixed wavelength in connection with high current pulsed ion beams an accuracy ofΔE _Exp/Γ≈5·10^?5 (Γ: resonance width) for the resonance energy seems to be achievable. Applying this technique to 2S-Lamb shift (LS) measurements on medium heavy ions would yield a precision ofΔE _Exp/E _LS≈1·10^?5, i.e. an improvement by a factor up to 100 as compared to present experiments.     

High speed determination of beta-receptor blocking agents in human urine by liquid chromatography/tandem mass spectrometry

Beta-receptor blocking agents are present on the international market in a huge variety. The International Olympic Committee prohibits the use of these drugs in several sport sections and doping control laboratories analyse urine samples of high-performance athletes with different techniques. Therefore, fast and reliable methods are required to enable a sensitive detection of many drugs and a high throughput of samples. In the present study a screening procedure is described using high speed liquid chromatography and multiple reaction monitoring to identify 32 beta-receptor blocking agents extracted from human urine. Urine specimens (blank urine samples, spiked urine samples and specimens of excretion studies) were hydrolysed, extracted and analysed within 7 min. Quasi-molecular ions (M(+) + H) of the beta-blockers are generated by means of an atmospheric pressure chemical ionization interface followed by collision-induced dissociation in a triple quadrupole mass spectrometer and subsequent detection of daughter ions. Proposals for the origin of common and individual secondary ions are presented.