Bromamine-B/PdCl2 is an Efficient System for the Synthesis of Anthranilic Acids from Indoles and Indigos

A convenient method has been developed for the conversion of indoles and indigos into anthranilic acids in good to excellent yields using a bromamine-B/PdCl₂ system. The general process utilizes our efficient method for the oxidation of indoles and indigos in alkaline (pH 12) acetonitrile/water (1:1) at 60 °C.     

On the Supposed Isoindole Synthesis from o-Tolunitrile

A recent communication¹ in this journal reported the reaction of o-tolunitrile with sodium in tetrahydrofuran to yield a compound, m.p. 123.5–124°, to which was assigned the isoindole structure 1. A plausible mechanism can be written for the formation of 1 involving reductive dimerization of the cyano groups of two molecules of the nitrile, subsequent 1,5-hydrogen shift from a methyl group, disrotatory electrocyclic isoindole ring closure, and finally air oxidation and tautomerization to 1. Nevertheless, the evidence presented did not require an isoindole structure. Moreover, it would be unusual for a primary enamine to survive.     

Palladium on carbon–bromobenzene mediated esterification and transesterification

A series of carboxylic acids were converted into their corresponding esters using the Pd/C catalyzed hydrogenation conditions in the presence of catalytic bromobenzene in alcohols and the method could also be applicable for the transesterification of esters. Good to excellent yields were obtained for different aliphatic or aromatic starting materials. The success of this esterification relies on the in situ generation of hydrobromic acid (HBr) from bromobenzene which provides a mild and acidic reaction environment. The palladium catalyst exhibits a remarkable activity and is reusable for up-to three consecutive cycles.     

Dynamic Interfacial Behavior of Poly(oxyethylene) Lauryl Ether Based Surfactant Mixtures

The adsorption behavior of binary mixtures comprising nonionic surfactants at the air–water interface has been studied by bubble pressure tensiometry at concentrations above and below their critical micelle concentrations. Surfactants with the same hydrocarbon chains but different degree of ethoxylations were chosen as the components to understand their mixing behavior at equilibrium and dynamic conditions. At short times, the adsorption is found to be diffusion limited for individual components as well as for the mixtures, as predicted by the Ward and Tordai model. The effective diffusion coefficient of the monomers in the mixed state displays a dynamic synergism, consistent with the molecular thermodynamic model for dynamic surface tension. However, the equilibrium surface tension and micellar diffusion coefficient of the mixtures exhibit ideal behavior.     

Solid phase extraction studies on cellulose based chelating resin for separation,pre-concentration and estimation of Cu2+and Ni2+

Chelating resins based on biopolymers, specifically cellulose, offers a green analytical method for determination of metal ions at trace levels present in various samples. It offers a fast, accurate and simple method for separation and pre-concentration of metal ions at low concentrations, prior to their determination by instrumental method. Cellulose based chelating resin (CELL-GLY) has been synthesised by immobilising glycine on it. CELL-GLY was used for the determination of trace amounts of Cu²⁺ and Ni²⁺ from aqueous solutions before their determination by FAAS. The preparation of CELL-GLY involves simple steps, based on natural and easily available biopolymer cellulose, which makes its use as chelating resin is a green method. The Cu²⁺ and Ni²⁺ can be quantitatively recovered from the CELL-GLY in the pH range 4.8–6.9 and 6.9-7.8 respectively with a recovery of more than 95% for each of these metal ions. Recovery of these metal ions using CELL-GLY was quantitative up to 35 °C. The detection limits for copper and nickel by FAAS were 1.20 ppb and 1.40 ppb, respectively. The method was successfully employed for the determination of trace amounts of Cu²⁺ and Ni²⁺ in various samples.     

β-Cyclodextrin-based chiral nanocomposite for thin-layer chromatographic detection of enantiomers of fluoxetine

Enantioselective analysis or separation is very essential for improved therapeutic effects of drugs as the pure enantiomeric drug formulations display potential benefits over racemates. In this work, we carried out (i) the synthesis of a nanocomposite of β-cyclodextrin and 3D graphene (G/β-CD NC), and (ii) its application for the detection of fluoxetine enantiomers [(RS)-FLX)] using a thin-layer chromatographic method. The synthesized nanocomposite was introduced into silica gel slurry while preparation of thin-layer plates. The separation conditions were optimized by altering pH, temperature, and mobile phase composition. The method is simple and easy to be optimized, and it can therefore be exploited to assess and monitor routine work of enantiomeric purity of drug enantiomers. The average precision (as measured by RSD) was in the region of 1.35‒1.65% for the enantiomers of (RS)-FLX. The measured limit of detection and limit of quantification for (RS)-FLX enantiomers were 1.8 and 5.4 mg mL^‒1, respectively.

     

Identification and quantification of anthocyanins,flavonoids, and phenolic acids in flowers of Rhododendron arboreum and evaluation of their antioxidant potential

The current study aimed to investigate the anthocyanins, non-anthocyanins (flavonoids and phenolic acids), and free radicals scavenging potential in the flowers of Rhododendron arboreum using ultra high performance liquid chromatography with ion mobility quadrupole time of flight tandem mass spectrometry. A total of 25 constituents including nine anthocyanins, six phenolic acids, and ten flavonoids were identified in the flower extract. The major anthocyanins identified were cyanidin-3-O-β-galactoside ( 1 ), cyanidin-3-O-α-arabinoside ( 4 ), and cyanidin-3-O-rhamnoside ( 8 ), while quercetin glycosides were the main identified flavonoids in R. arboreum flowers. Additionally, ultra high performance liquid chromatography methods were developed and validated for the quantification of nine compounds (anthocyanins, flavonoid glycosides, and phenolic acids); five of them were quantified using internal standards. The extracts were analyzed for total phenolics (123.6 mg GAE/g), anthocyanin content (1.76% w/w), and evaluated for antioxidant properties against 2,2-diphenyl-1-picrylhydrazyl radical (IC₅₀: 102.06 and 96.92 μg/mL) and 2,2′-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) radical cation (112.25 and 45.59 μM TE/g) assays. The profiling of R. arboreum for anthocyanins is reported for the first time. The findings suggest that the flowers are a promising source of bioactive constituents and could be used as functional food, antioxidants, and nutraceuticals.     

Effect of thermal annealing on a bilayer polyvinyl alcohol/polyacrylic acid electrospun hydrogel nanofibres loaded with doxorubicin and clarithromycin for a synergism effect against osteosarcoma cells

Polyvinyl alcohol/polyacrylic acid (PVA/PAA) bilayer hydrogel nanofibres were successfully fabricated by electrospinning and physically crosslinked via heat treatment. The effects of the thermal annealing process on the structure, morphology, swelling, thermal properties and hydrophilicity of electrospun nanofibres were investigated. In addition, these membranes were also used to incorporate doxorubicin and clarithromycin for osteosarcoma treatment, one in each layer. These drugs were used because it is hypothesized in this work that a synergism occurs between both drugs. So, these membranes were analyzed towards their dual-drug release and potential cytotoxicity towards the U2OS human osteosarcoma cell line. Moreover, the water contact angle, disintegration, swelling and weight loss studies confirmed the rapid swelling and improved water stability of the annealed PVA/PAA bilayer nanofibres. The annealed bilayer nanofibres exhibited an increase in the average diameter and degree of crystallinity. In addition, the results revealed that a variation occurred in the degree of hydrophilicity of annealed PVA/PAA bilayer nanofibres. The PAA nanofibres surface exhibited higher hydrophilicity than the PVA nanofibres surface. Drug delivery presented to be as fast rate release for clarithromycin and slow-rate release for doxorubicin, which may be advantageous because both drugs exhibited to be synergetic for certain dosages presenting the combination of the drugs higher than 50% of cell inhibition, while these membranes had higher inhibition values (up to 90%), which was attributed to the PAA but also the drugs. These unique properties are of potential interest in drug delivery applications for dual drug delivery where the tunability of surfaces is desirable.     

A rapid polyol combustion strategy towards scalable synthesis of nanostructured LiFePO4/C cathodes for Li-ion batteries

In the present study, carbon-coated lithium iron phosphate (LiFePO₄/C) is prepared directly by a polyol-assisted pyro-synthesis performed under reaction times of a few seconds in open-air conditions. The polyol solvent, tetraethylene glycol (TTEG), acts as a low-cost fuel to facilitate combustion and the released exothermic energy promotes the nucleation and growth processes of the olivine nanoparticles. In addition, phosphoric acid (used as the phosphorous source) acts as a catalyst to accelerate polyol carbonization. The structure analysis of the as-prepared LiFePO₄/C using X-ray, neutron diffraction and ⁷Li NMR studies suggested the efficacy of the rapid technique to produce highly crystalline phase-pure olivine nanocrystals. The electron microscopy and particle-size distribution studies revealed that the average particle diameters lie below 100 nm and confirmed the presence of a surface carbon layer of 2–3 nm thickness. The thermal and elemental studies indicated that the carbon content in the sample was approximately 5 %. The prepared LiFePO₄/C cathode delivered capacities of 162 mA h g^-1 at 0.1 °C rates with impressive capacity retention for extended cycling. The polyol-assisted pyro-synthesis, which evades the use of external energy sources, is not only a straightforward, simple and timely approach but also offers opportunities for large-scale LiFePO₄/C production.     

Molecular and Biochemical Characteristics of Recombinant β-Propeller Phytase from Bacillus licheniformis Strain PB-13 with Potential Application in Aquafeed

Phytic acid is the major storage form of organic phosphorus in nature- and plant-based animal feed. It forms insoluble complexes with nutritionally important metals and proteins that are unavailable for monogastric or agastric animals. Phytases initiate the stepwise hydrolysis of phytic acid and release inorganic orthophosphate. In the present investigation, the phytase gene from a phytase producing Bacillus licheniformis strain PB-13 was successfully expressed in Escherichia coli BL21. Recombinant phytase ‘rPhyPB13’ was found to be catalytically active, with an activity of 0.97 U/mL and specific activity of 0.77 U/mg. The rPhyPB13 was purified to 14.10-fold using affinity chromatography. Similar to other β-propeller phytases, purified rPhyPB13 exhibited maximal activity at pH 6.0–6.5 and 60 °C in the presence of 1 mM Ca²⁺ and was highly active over a wider pH range (pH 4.0–8.0) and high temperature (80 °C). It has shown maximum activity towards Na-phytate as substrate. The observed K _m , V _max and k _cat of purified rPhyPB13 were 1.064 mM, 1.32 μmol/min/mg and 27.46 s^?1, respectively. PhyPB13 was resistant to trypsin inactivation, activated in presence of Ca²⁺ and inhibited in presence of EDTA. Crude rPhyPB13 has good digestion efficiency for commercial feed and soybean meal. These results indicate that PhyPB13 is a β-propeller phytase that has application potential in aquaculture feed.