Investigating the solid state hosting abilities of homo- and hetero-valent [Co7] metallocalix[6]arenes

A family of homo-valent [Co(II)(7)(OH)(6)(L(1))(6)](NO(3))(2) (1), [(MeOH)(2) is a subset of Co(II)(7)(OH)(6)(L(1))(6)](NO(3))(2) (2) (where L(1)H = 2-iminomethyl-6-methoxyphenol) and hetero-valent [(NO(3))(2) is a subset of Co(III)Co(II)(6)(OH)(6)(L(2))(6)](NO(3))·3MeCN (4) (where L(2)H = 2-iminophenyl-6-methoxyphenol) complexes possess metallic skeletons describing planar hexagonal discs. Their organic exteriors form double-bowl shaped topologies, and coupled with their 3-D connectivity, this results in the formation of molecular cavities in the solid state. These confined spaces are shown to behave as host units in the solid state for guests including solvent molecules and charge balancing counter anions. Magnetic susceptibility measurements on 2 and 4 reveal weak ferro- and ferrimagnetism, respectively. The utilisation of other Co(II) salt precursors gives rise to entirely different species including the mononuclear and trinuclear complexes [Co(II)(L(2))(2)] (5) and [Co(III)(2)Na(I)(1)(L(3))(6)](BF(4)) (6) (where L(3)H = 2-iminomethyl-4-bromo-6-methoxyphenol).     

Highly luminescent InP/GaP/ZnS nanocrystals and their application to white light-emitting diodes

Highly stable and luminescent InP/GaP/ZnS QDs with a maximum quantum yield of 85% were synthesized by in situ method. The GaP shell rendered passivation of the surface and removed the traps. TCSPC data showed an evidence for the GaP shell. InP/GaP/ZnS QDs show better stability than InP/ZnS. We studied the optical properties of white QD-LEDs corresponding to various QD concentrations. Among various concentrations, the white QD-LEDs with 0.5 mL of QDs exhibited a luminous efficiency of 54.71 lm/W, Ra of 80.56, and CCT of 7864 K.     

Synthesis of 3-Alkylidenecepham-4-carboxylic Acid derivatives by Samarium(II) Iodide Reduction

Samarium(II) iodide promoted reductive deacetoxylation of 7-aminocephalosporanic acid derivatives to synthesize 3-alkylidenecepham-4-carboxylates, which could be valuable intermediates for the synthesis of new cephalosporin antibiotics, was investigated.     

Polyethylene/Clay Nanocomposite by In‐Situ Exfoliation of Montmorillonite During Ziegler‐Natta Polymerization of Ethylene

Complete exfoliation of montmorillonite during Ti‐based Ziegler‐Natta polymerization of ethylene has been successfully carried out by using montmorillonite (MMT‐OH) modified with intercalation agents containing hydroxyl groups. Hydroxyl groups in intercalation agents offer facile reactive sites for anchoring catalysts in between silicate layers. Comparison of exfoliation characteristics between MMT‐OH and non‐intercalated montmorillonite showed that the feasibility of exfoliation during ethylene polymerization was highly dependent on the catalyst fixation method.     

A study of mass transfer kinetics of alanyl-alanine on a chiral crown ether stationary phase

The mass transfer kinetics of alanyl-alanine enantiomers in a column packed with a chiral stationary phase (CSP) ChiroSil RCA(+) was studied by means of the moment method. Methanol-water solutions acidified with sulphuric acid were used as the mobile phase. It was shown that the spreading of peaks in the column was strongly affected by abnormal eddy diffusion. This effect was well described within the framework of the Giddings coupling theory. The comprehensive four-term Giddings equation for eddy diffusion was applied, considering simultaneous contribution of the trans-column, trans-channel, short-range inter-channel, and long-range inter-channel dispersion factors. Through these calculations, a predominant importance of the trans-column flow velocity bias was revealed. Besides eddy diffusion, the adsorption kinetic resistance to mass transfer plays a noticeable role in band broadening, all the other contributions (from longitudinal molecular diffusion, external and intraparticle mass transfer) being of minor significance. A relative importance of the mass transfer kinetics increases correlatively with a growth of the retention factor. Both the retention and kinetics of the adsorption of alanyl-alanine on the CSP in study are enantioselective. The influence of the column pressure on retention as well as corrections required because of this influence are also discussed.     

Dual‐curable fluorinated poly(methacrylate) copolymers for optical adhesives

In pursuit of photo‐curable adhesive for optical communication, dual‐curable acrylic oligomers (AOs) having alkoxy silane group, fluorine atoms and vinyl group as a pendent group were synthesized by two‐stage reactions. The isocyanate group containing oligomers were firstly synthesized via radical polymerization of acrylic monomers, and followed by urethane reaction with 2‐hydroxy ethyl methacrylate. The dual curing behaviors, e.g. thermal and photo‐cure, were studied by using photo‐differential scanning calorimetry (DSC) and real‐time IR. An optimum adhesive formulation, based on AO (15 g), epoxy acrylate (80 g), isobonyl methacrylate (17 g) and photo‐initiator (3 g), was obtained. As the content of AO was increased in the optical adhesive formulation, refractive index decreased but transmittance increased due to the increase in fluorine content. The optical transmittance at the range of 1.3 to 1.55 μm was higher than 90%. The addition of colloidal silica with the earlier mentioned formulation was helpful in decreasing crosslinking volume shrinkage and the increasing of glass fiber adhesion. The required properties for the optical adhesive, including chemical resistance and thermal resistance, dimension stability, etc. were also investigated. Copyright © 2005 John Wiley & Sons, Ltd.     

Comparison of activities of homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) for synthesis of syndiotactic polystyrene by UV/visible spectroscopic study

The catalytic activities in syndiospecific polymerization of styrene in hydrocarbon using homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) were investigated through UV/visible spectroscopic analysis. A strong UV absorption band of CpTiCl₃, itself, incipiently appeared at λ_max = 400 nm in toluene, followed by a bathochromic shift with its remarkable decrease by the addition of MAO. The absorption band intensity at λ_max = 400 nm arising from delocalization of π-electrons on the cyclopentadienyl ring decreased by methylation in the presence of MAO with regard to the mechanism for production of an active center (“cation-like”), for example, the change of the ionic nature. The intensity decrease at λ_max = 400 nm was suppressed over 2000 of the [Al]/[Ti] ratio. In the case of Ti(OC₄H₉)₄ having a σ-ligand, new and broad UV absorption bands were developed at λ_max = 340 nm and 410 nm in the presence of MAO in contrast with the CpTiCl₃/MAO system. Comparison between the relative absorption intensities at λ_max = 340 nm and 410 nm led to the determination of a maximum catalytic activity of Ti(OC₄H₉)₄ in the presence of MAO related to the polymerization yield. The maximum polymerization yield was observed with regard to the relative maximum value of the absorption intensity at λ_max = 410 nm with the [Al]/[Ti] ratio (500). From observation for polymorphism of the final products via differential scanning calorimetric analysis (DSC), the thermally unstable β-form seemed to be produced by the CpTiCl₃/MAO system independent of the MAO concentration, the Ti(OC₄H₉)₄/MAO system produced a thermally stable α-form in the low MAO concentration (up to 100 of the [Al]/[Ti] ratio), and a mixture of α- and/or β-forms over 200 of the [Al]/[Ti] ratio under our experimental conditions. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1733–1741, 1998     

Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes

The most important variable affecting the yield in the coupling reactions of polymeric organolithium compounds with chlorosilane compounds has been investigated through size-exclusion chromatographic (SEC) analysis. The coupling reaction of poly(styryl)lithium with dichlorodimethylsilane as a silane-coupling agent provided 44 wt % of the coupling yield. The coupling yield, depending on the chain end reactivity of active polymers, was not greatly affected. The addition of a Lewis base such as N,N,N′,N′-tetramethylethylenediamine (TMEDA) even after complete polymerization of the dienes in hydrocarbon seems to affect the coupling reaction, resulting in decreasing the yield. The 1,2- or 3,4-enchain contents in the polydiene backbones affected the reduction of the linking efficiency in the coupling of the poly(dienyl)lithiums with chlorosilanes as the linking agent. The linking yields of the active polymers including over 75 mol % of 1,2- or 3,4-enchainment on the polydiene segment were below 20 wt %. The linking yields exhibited a dependence not only on the steric requirement of the chain end, but also the microstructure of the polydiene segment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1743–1753, 1998