Pressurized liquid extracts from Spirulina platensis microalga. Determination of their antioxidant activity and preliminary analysis by micellar electrokinetic chromatography

In this work, different extracts from the microalga Spirulina platensis are obtained using pressurized liquid extraction (PLE) and four different solvents (hexane, light petroleum, ethanol and water). Different extraction temperatures (115 and 170 degrees C) were tested using extraction times ranging from 9 to 15 min. The antioxidant activity of the different extracts is determined by means of an in vitro assay using a free radical method. Moreover, a new and fast method is developed using micellar electrokinetic chromatography with diode array detection (MEKC-DAD) to provide a preliminary analysis on the composition of the extracts. This combined application (i.e., in vitro assays plus MEKC-DAD) allowed the fast characterization of the extracts based on their antioxidant activity and the UV-vis spectra of the different compounds found in the extracts. To our knowledge, this work shows for the first time the great possibilities of the combined use of PLE-in vitro assay-MEKC-DAD to investigate natural sources of antioxidants.     

Palladium‐catalyzed unstrained C(sp3)―N bond activation: the synthesis of N,N‐dimethylacetamide by carbonylation of trimethylamine

This work describes a highly efficient unstrained C(sp³)―N bond activation approach for synthesis of N,N‐dimethylacetamide (DMAc) via catalytic carbonylation of trimethylamine using a PdCl₂/bipy (bipy = 2,2′‐bipyridine)/Me₄NI catalyst system. A low Pd catalyst dosage (1.0 mol%) is sufficient for high selectivity (98.1%) and yield (90.8%), with a turnover number (TON) of 90.0 mmol of DMAc obtained per mmol of PdCl₂ employed under mild reaction conditions. The influence of reaction parameters such as catalyst precursor dosage, ligand type and promoter on activity is investigated. This work also discusses in detail the halide promoter's role in the reaction, and provides a plausible mechanism based on the intermediates methyl iodide and acetyl iodide. Analyses indicate that the carbonylation of trimethylamine may proceed through an active intermediate acetyl iodide formed by carbonylation of methyl iodide generated from the decomposition of the promoter Me₄NI under reaction conditions. The formation of acetyl iodide favors the cleaving efficiency of the inert unstrained C(sp³)―N bond of trimethylamine. Copyright © 2013 John Wiley & Sons, Ltd.     

Liquid crystalline epoxy resin with improved thermal conductivity by intermolecular dipole–dipole interactions

To address tremendous needs for developing efficiently heat dissipating materials with lightweights, a series of liquid crystalline epoxy resins (LCEs) are designed and synthesized as thermally conductive matrix. All prepared LCEs possess epoxies at the molecular side positions and cyanobiphenyl mesogenic end groups. Based on several experimental results such as differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction, it is found that the LCEs exhibited liquid crystalline mesophases. When LCE is cured with a diamine crosslinker, the cured LCE maintains the oriented LC domain formed in the uncured state, ascribing to a presence of dipole–diploe and π–π interactions between cyanobiphenyl mesogenic end groups. Due to the anisotropic molecular orientation, the cured LCE exhibits a high thermal conductivity of 0.46 W m^?1 K^?1, which is higher than those of commercially available crystalline or amorphous epoxy resins. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 708–715     

离子液体中Mn（Salen）催化仲醇的氧化反应研究

以PhI(OAc)2为氧化剂,考察了1,3-二烷基咪唑硫酸酯系列离子液体中Mn(Salen)催化仲醇氧化的反应. 结果表明, 在MMISM-CH2Cl2(1:4,v:v)混合溶剂中, 反应条件为n((-苯乙醇): n(醋酸碘苯): n(催化剂1c)=50: 70: 1时, (-苯乙醇的转化率可以达到97.8%, 产物苯乙酮的选择性为100%, 远高于在纯CH2Cl2中的结果, 也要好于[bmim]BF4和[bmim]PF6对该反应的促进作用. 此外, BMISM及BEISE对催化剂1c有较好的稳定作用,催化剂可以重复使用.     

Surface-enhanced Raman scattering of nucleic acid components in silver sol: Uracil and its derivatives

The surface-enhanced Raman scattering (SERS) of uracil, uridine, 2′-deoxyuridine and 5′-rUMP adsorbed on aqueous silver sol was investigated. Uracil was found to adsorb as the N-3 deprotonated form, which underwent a reorientation from the situation where the base was perpendicular to the surface to the situation where the base lay flat on the surface as the surface charge was made more negative. The N-3 deprotonated molecules of uridine, 2′-deoxyuridine and 5′-rUMP were found to lie flat on the silver surface regardless of the bulk concentration and the silver surface charge.     

Reactive ligand influence on initiation in phenylene catalyst‐transfer polymerization

Synthesizing conjugated polymers via catalyst‐transfer polymerization (CTP) has led to unprecedented control over polymer sequence and molecular weight. Yet many challenges remain, including broadening the monomer scope and narrowing the molecular weight dispersities. Broad polymer dispersities can arise from nonliving pathways as well as slow initiation. Previously, slow initiation was observed in Ni‐mediated CTP of phenylene monomers. Although precatalysts with faster initiation rates have been reported, the rates still do not exceed propagation. Herein a second‐ and third‐generation of reactive ligands are described, along with a simple method for measuring initiation rates. A precatalyst with an initiation rate that exceeds propagation is now reported, however, the resulting polymer samples still exhibit broad dispersities, suggesting that slow initiation is not the most significant contributing factor in Ni‐mediated phenylene polymerizations. In addition, initiation rates measured under authentic polymerization conditions revealed that both exogenous triphenylphosphine and an ortho‐trifluoroethoxy substituent on the reactive ligand have a strong influence. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1530–1535