Trap centers in Au-implanted MOS structures

Trap centers in the Si-SiO₂ interface region of MOS structures doped by ion implantation of gold have been investigated using constant capacitance deep level transient spectroscopy (CC-DLTS). Gold doses of 10¹²–3 × 10¹³ cm^–2 were implanted into the back surface of the wafers and were then redistributed during a diffusion anneal for 30 min at 1100° or 900° C. Three Au-related trap levels have been observed in the interface region, which were attributed to the Au-donor (E _v +0.35 eV), the Au-acceptor (E _v +0.53 eV), and the Au-Fe complex (E _v +0.45 eV). The trap concentration profiles show that the Si-SiO₂ interface affects the Au concentration in a depth range of 1 m from the interface and that gettering of Au occurs at the interface. The interface state density is independent of the Au concentration at the interface even for concentrations of 10¹⁵ cm^–3.     

Effect of NaOH and NaCl on the disodiumn-decane phosphonate micellar aggregation number

The diffusion coefficient of disodiumn-decane phosphonate micelles was studied by polarography at 25°C in NaCl and in NaOH solutions, and the size and aggregation number of the micelles was computed as a function of Na⁺ concentration. All other conditions being equal, the addition of NaCl produces micelles with an aggregation number one order of magnitude larger than the NaOH addition. This is due to the increase of the effective charge per micellized head group produced by the reaction of OH- with the hydrolized head groups which are mainly present as-PO₃H- in the micellar Stern layer.     

The thermally stable silylene Si[(NCH2Bu)2C6H4-1,2]: reaction with pyridine and quinoline

Two equivalents of the thermally stable silylene Si[(NCH₂Bu^t)₂C₆H₄-1,2] (1) react with pyridine to yield the 1-aza-2,3-disilacyclobutane derivative (2), which is labile and slowly rearranges via a 1,3-H shift to the 2-pyridyldisilane (3). A similar reaction of 1 with quinoline gives 1-aza-2,3-disilacyclobutane derivative (4), which is stable. The X-ray structures of 2 and 3 are discussed.     

Zeolite content determination in kaolinic clays via thermal effects

For application in catalysis and adsorption processes, zeolites are synthesized on the surface of spray-dried kaolin microspheres. Various thermal effects are used for the rapid characterization of the zeolite type and content. From DTA measurements, the exothermic lattice break-down peak gives information on the zeolite type and the thermal stability of the sample. Measurements of the heats of immersion by a very simple and quick method allow conclusions about the type and the sorption properties of the zeolite part of the clay. The most precise method to estimate the zeolite content was a standardized technique of desorption and readsorption of water or organic compounds by means of a thermobalance.

---

Zusammenfassung Zur Anwendung in der Katalyse und bei Adsorptinsprozessen werden Zeolithe auf der Oberfläche sprüh-getrockneter Kaolin-Mikrokugeln eingesetzt. Verschiedene thermische Effekte werden zur schnellen Charakterisierung des Zeolith-Typs und -Gehalts genutzt. Der exotherme DTA-peak beim Gitterzusammenbruch liefert Informationen über Zeolith-Typ und thermische Stabilität der Probe. Eine sehr einfache Schnellmethode zur Messung der Immersionswärmen erlaubt Schlussfolgerungen über Typ und Sorptionseigenschaften des zeolithischen Anteils des Tons. Die genaueste Methode zur Bewertung des Zeolithgehalts war eine standardisierte thermogravimetrische Desorptions- und Readsorptions-Methode mit Wasser oder organiscen Verbindungen.

---

, , , . . , . , , . , .

     

A new approach to phosphoserine and phosphothreonine analysis in peptides and proteins: chemical modification,enrichment via solid-phase reversible binding,and analysis by mass spectrometry

beta-Elimination of the phosphate group on phosphoserine and phosphothreonine residues and addition of an alkyldithiol is a useful tool for analysis of the phosphorylation states of proteins and peptides. We have explored the influence of several conditions on the efficiency of this PO(4)(3-) elimination reaction upon addition of propanedithiol. In addition to the described influence of different bases, the solvent composition was also found to have a major effect on the yield of the reaction. In particular, an increase in the percentage of DMSO enhances the conversion rate, whereas a higher amount of protic polar solvents, such as water or isopropanol, induces the opposite effect. We have also developed a protocol for enrichment of the modified peptides, which is based on solid-phase covalent capture/release with a dithiopyridino-resin. The procedure for beta-elimination and isolation of phosphorylated peptides by solid-phase capture/release was developed with commercially available alpha-casein. Enriched peptide fragments were characterized by MALDI-TOF mass spectrometric analysis before and after alkylation with iodoacetamide, which allowed rapid confirmation of the purposely introduced thiol moiety. Sensitivity studies, carried out in order to determine the detection limit, demonstrated that samples could be detected even in the low picomolar range by mass spectrometry. The developed solid-phase enrichment procedure based on reversible covalent binding of the modified peptides is more effective and significantly simpler than methods based on the interaction between biotin and avidin, which require additional steps such as tagging the modified peptides and work-up of the samples prior to the affinity capture step.     

Quinoprotein glucose dehydrogenase modified carbon paste electrode for the detection of phenolic compounds

The development of an amperometric biosensor for the determination of phenolic compounds is described, using quinoprotein glucose dehydrogenase. The enzyme is integrated into carbon paste and its ability to donate electrons to oxidized phenolic compounds during glucose oxidation is exploited. The sensor response is based on electrochemical oxidation of the phenolic compound followed by its enzymatic regeneration when the bulk solution contains glucose and the electrode is potentiostated at +500 mV (vs. Ag/AgCl/0.1 mol/L KCl). As the result of the catalytic analyte regeneration the electrodes offer very sensitive measurements of redox species like p-aminophenol and hydroquinone and catecholamines such as epinephrine, norepinephrine, and dopamine. The sensor performance is characterized for the different substrates. Highest sensitivity is achieved for p-aminophenol which could be determined at sub-nanomolar level.     

Reaktionen von komplexliganden : XIX. Einschiebung von inaminen in chrom-alkenylcarben- und chrom-aminocarber-bindungen

1-Diethylaminopropyne reacts with pentacarbonyl[methoxy(2,2-diphenylethenyl)carbene]chromium in a stereoselective way to give pentacarbonyl-[diethylamino-E-(2-methoxy-1-methyl-4,4-diphenyl-1,3-butadienyl)carbene]-chromium via insertion of the alkyne into the metal-carbene bond. The reaction of the ynamine with pentacarbonyl[methylamino(phenyl)carbene]chromium results in insertion of the alkyne and loss of carbon monoxide to give cis-tetracarbonyl[3-aza-1-methyl-2-phenyl-2-butenyl)diethylaminocarbene]-chromium. Its structure was established by oxidative degradation in an aqueous medium to give 2-benzoyl-N,N-diethylpropanamide and finally confirmed by an X-ray analysis. The new compounds are characterized spectroscopically.     

Chalkogenolat-lonen und ihre Derivate. I. Darstellung und Eigenschaften salzartiger Chalkogenophenolate

Chalcogenolates and their Derivatives. I. Syntheses and Properties of Ionic Chalcogenophenolates The syntheses and properties of ionic chalcogenophenolates are described. Using liquid ammonia as solvent the alkali chalcogenophenolates M[EPh] (M = Na, K; E = Se, Te; Ph = C₆H₅) have been synthesized via reduction of the diphenyl dichalcogenides with alkali metals. Similarly, the tetraphenylphosphonium chalcogenophenolates [Ph₄P][EPh] (E = S, Se, Te) have been obtained by reacting alkali chalcogenophenolates with tetraphenylphosphonium chloride.     

Substituenteneffekte auf die C–C-Bindungsstärke, 8. Standardbildungsenthalpien und Spannungsenthalpien von 1,1,2,2-Tetraethylethylenglykol-dimethylether und D,L-1,2-Dimethyl-1,2-diphenylethylenglykol-dimethylether

Effects of Substituents on the Strength of C - C Bonds, 8¹. - Heats of Formation and Strain of 1,1,2,2-Tetraethylethylene Glycol Dimethyl Ether and D,L .-1,2-Dimethyl-l,2-diphenylethylene Glycol Dimethyl Ether The heats of combustion of the title compounds 1 and 2 were measured calorimetrically with the result (kcal mol ^-1, s. d. in parentheses) ΔH°_c = − 1880.1 (± 0.6) and − 2373.3 (± 1.4). The heat of vaporisation of 1 ΔH^v = 14.3 (± 0.3) and the heat of sublimation of 2 ΔH^sub = 27.2 (± 0.5) were derived from their temperature dependance of the vapor pressure. The latter were determined between 30 and 80°C using a flow method. The resulting standard heats of formation ΔH°_t(g) = −122.4 (± 0.7) and −43.8 (±1.5) for 1 and 2 correspond to a strain enthalpy (_s) of 15.9 and 8.0 kcal mol^-1, respectively. The steric strain of the dimethoxyethanes 1 and 2 is about one fourth lower than the strain of the corresponding dimethylethanes 3 and 4 bearing the same substituents. Thus, a methoxy group causes less steric stress than a methyl group.