Computational Fluid Dynamic Design of Jet Stirred Reactors for Measuring Intrinsic Kinetics of Gas‐Phase and Gas‐Solid Reactions

Nonreactive and reactive computational fluid dynamic simulations were applied to optimize the design of a laboratory scale jet stirred reactor for measuring intrinsic kinetics of gas‐phase and gas‐solid reactions, i.e. kinetics determined by chemical steps only and not by heat or mass transfer. In the past these reactors were designed and tested based on empirical design criteria and residence time distribution experiments. This work shows that these do not always capture important local effects that are vital for kinetic studies. First the degree of macro–mixing was evaluated for three different geometries (down case, 45° case and 90° case) by performing in silico residence time distribution experiments at 900 K, showing that with these type of experiments only minor differences are observed. However, the ethane steam cracking simulations revealed major differences, with the 45° case being the most uniform in terms of temperature and the 90° case being by far the worst. The species nonuniformity in all geometries was acceptable and was in some cases even partly masked by important shortcut streams such as those observed in the 90° case. The existing gradients on the substrate surface are sufficiently small to be neglected in modeling efforts. As temperature is the major parameter determining the rate of the surface reactions, the 45° case is suggested as the best geometry for measuring intrinsic kinetics.     

(Trifluoromethylselenyl)methylchalcogenyl as Emerging Fluorinated Groups: Synthesis under Photoredox Catalysis and Determination of the Lipophilicity

The synthesis of molecules bearing (trifluoromethylselenyl)methylchalcogenyl groups is described via an efficient two-step strategy based on a metal-free photoredox catalyzed decarboxylative trifluoromethylselenolation with good yields up to 88 %, which raised to 98 % in flow chemistry conditions. The flow methods allowed also to scale up the reaction. The mechanism of this key reaction was studied. The physicochemical characterization of these emerging groups was performed by determining their Hansch–Leo lipophilicity parameters with high values up to 2.24. This reaction was also extended to perfluoroalkylselenolation with yields up to 95 %. Finally, this method was successfully applied to the functionalization of relevant bioactive molecules such as tocopherol or estrone derivatives.     

Anion effects on the phase transition of N‐isopropylacrylamide hydrogels

NMR spectra were collected for poly(N‐isopropylacrylamide) (PNIPAAm) hydrogel using high‐resolution magic angle spinning (HRMAS) after gel pieces were hydrated in the presence of D₂O, NaF, NaCl, and NaI aqueous solutions. Changes in the peak height intensity of the spectra provide quantitative insight into the phase transition process. The thermodynamic values of the phase transition were calculated using a van't Hoff analysis of the NMR data. Unlike the trend observed for decreases in the (LCST), changes in the enthalpy and entropy did not clearly display a linear dependence with respect to salt concentration. Rather, it was observed that increases in salt concentration did not affect the enthalpy and entropy to the extent as the initial change observed between no salt and 100 mM solutions. Finally, the effect of salts on the hysteresis of the rehydrating process was observed. Hysteresis occurs due to the need for hydrophobic interactions to break down before water is able to infiltrate the polymer matrix. NaF stabilizes hydrophobic interactions while NaI destabilize hydrophobic interactions, causing them to break down at higher temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Silicon‐containing trifunctional and tetrafunctional cyanate esters: Synthesis,cure kinetics,and network properties

The synthesis and physical properties of new silicon‐containing polyfunctional cyanate ester monomers methyl[tris(4‐cyanatophenyl)]silane and tetrakis(4‐cyanatophenyl)silane, as well as polycyanurate networks formed from these monomers are reported. The higher crosslinking functionality compared to di(cyanate ester) monomers enables much higher ultimate glass transition temperatures to be obtained as a result of thermal cyclotrimerization. The ability to reach complete conversion is greatly enhanced by cocure of the new monomers with di(cyanate ester) monomers such as 1,1‐bis(4‐cyanatophenyl)ethane. The presence of silicon in these polycyanurate networks imparts improved resistance to rapid oxidation at elevated temperatures, resulting in char yields as high as 70% under nitrogen and 56% in air in the best‐performing networks. The water uptake in the silicon‐containing networks examined is 4–6 wt % after 96 h of immersion at 85 °C, considerably higher than both carbon‐containing and/or di(cyanate ester) analogs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 767–779     

Synthesis of 2,2′-bipyrrole-5-carboxaldehydes and their application in the synthesis of B-ring functionalized prodiginines and tambjamines

Facile, versatile, and cost-effective synthetic routes for the preparation of a range of new 3-alkyl-, 4-alkyl-, 3,4-dialkyl-, and 3-halo-4-alkyl-2,2′-bipyrrole-5-carboxaldehydes have been developed. These 2,2′-bipyrrole-5-carboxaldehydes offer interesting potential as building blocks for making bioactive natural and unnatural products, as demonstrated by the synthesis of B-ring functionalized prodiginines (PGs) and tambjamines.