Structural and electrical characterization of PZT on gold for micromachined piezoelectric membranes

Piezoelectric membranes have been fabricated that incorporate a gold bottom electrode with an adhesion layer of titanium–tungsten (10:90 wt. %). For solution-deposited acetic acid based lead zirconate titanate (HoAc-PZT) with a Zr:Ti ratio of 40:60, the film’s average piezoelectric coefficient, e₃₁, is -5.31 C/m², with a dielectric constant of 814 at 200 Hz, which is similar to values for platinum bottom electrodes. The PZT structure remains columnar on both types of bottom electrodes. Initial fabrication attempts resulted in cracking that initiated in the PZT layer of the structure. X-ray photoelectron spectroscopy was utilized to establish how processing affects diffusion throughout the composite membrane structure. Crack-free membranes were fabricated and tested. This paper discusses the performance properties and piezoelectric fatigue results for these membranes. PACS 77.84.-s; 77.84.Lf     

Effect of electric current on the magnetic and magnetoelastic properties of amorphous ferromagnetic alloys

The magnetic and magnetoelastic parameters of Fe₆₄Co₂₁B₁₅ and Fe_81.5B_13.5Si₃C₂ amorphous ferromagnetic alloys treated by direct electric current in air are studied as functions of the applied magnetic field and current density. The samples of the alloy have the form of narrow strips with different lengths. It is found that the magnetoelastic parameters of the dc-treated alloys depend on the magnetic field in a qualitatively different way. From the behavior of the magnetic and magnetoelastic parameters of the alloys in the magnetic field a model of magnetization nonuniform distribution in amorphous ferromagnetic alloys subjected to dc treatment is proposed.     

Reconstruction of an acoustically sound-soft obstacle from one incident field and the far-field pattern

The problem considered is that of determining the shape of aplane acoustically sound-soft obstacle from the knowledge ofthe far-field pattern for one time-harmonic incident field.An iterative procedure is proposed based on two boundary integralsrepresenting the incident field and the far-field pattern, respectively.Numerical examples are included which show that the proceduregives accurate numerical approximations in relatively few iterations.     

Evaluating Zn2SiO4:Mn phosphor for use in medical imaging radiation detectors

2 SiO₄:Mn phosphor was evaluated for use in radiation detectors of medical imaging systems. Zn₂SiO₄:Mn was used in the form of laboratory-prepared fluorescent layers (screens) with coating weights from 18 to 150 mg/cm². The phosphor was excited to luminescence by low-energy X-raysusing X-raytube voltages ranging from 15 to 50 kVp. The number of emitted optical photons per incident X-rayquantum was thus determined for various X-rayenergies and phosphor coating weights. The optical emission spectrum was also measured and it was used to evaluate the spectral compatibility of Zn₂SiO₄:Mn with radiographic films, photocathodes and the Si photodiode. Finally, phosphor optical properties were estimated by fitting a theoretical model to experimental data. Results showed that Zn₂SiO₄:Mn is more efficient for low-energy X-rays. Its intrinsic conversion efficiency was found equal to 0.08, which is comparable to that of actually used phosphors. Zn₂SiO₄:Mn was also adequately compatible with orthochromatic films and the ES-20 photocathode, thus being appropriate for low-voltage radiography and fluoroscopy. Received: 31 July 1998/Accepted: 3 August 1998     

QCD corrections to the forward-backward asymmetries of c and b quarks at the Z pole

Measurements of the forward-backward production asymmetry of heavy quarks in Z decays provide a precise determination of . The asymmetries are sensitive to QCD effects, in particular hard gluon radiation. In this paper QCD corrections for and are discussed. The interplay between the experimental techniques used to measure the asymmetries and the QCD effects is investigated using simulated events. A procedure to estimate the correction needed for experimental measurements is proposed, and some specific examples are given. Received: 26 February 1998 / Published online: 2 June 1998     

Single change covering designs

A single-change covering designSC (v, k, b) on av-setV is a sequence ofb k-sets (blocks) onV which together cover every pair of elements ofV at least once, such that two successive blocks havek–1 elements in common. It is desirable to minimizeb. Some constructions and lower bounds forb are given.     

Mixed block elimination for linear systems with wider borders

The paper is about the stable solution of possibly ill-conditionedbordered linear systems. Given stable solvers for matrix A andfor A^T, we prove that the Govaerts Mixed Block Elimination (BEM)method constitutes a stable solver for the matrix consistingof A or A^T with a border of width 1, and hence by recursionfor a border of any width. We express the algorithm in an efficient,iterative, form. We analyse its operation count, and verifythe theory by extensive numerical experiments. ^*Senior Research Associate of the Belgian National Fund of ScientificResearch NFWO.     

Parity-locking effect in a strongly-correlated ring

Orbital magnetism in an integrable model of a multichannel ring with long-ranged electron-electron interactions is investigated. In a noninteracting multichannel system, the response to an external magnetic flux is the sum of many diamagnetic and paramagnetic contributions, but we find that for sufficiently strong correlations, the contributions of all channels add constructively, leading to a parity (diamagnetic or paramagnetic) which depends only on the total number of electrons. Numerical results confirm that this parity-locking effect is robust with respect to subband mixing due to disorder.