Quantification of copper and zinc species fractions in legume seeds extracts by SEC/ICP-MS: validation and uncertainty estimation

Fractions of Cu and Zn species in legume samples (common white bean, pea, chick pea and lentil seeds and defatted soybean flour) were analysed by on-line hyphenation of size exclusion chromatography and inductively coupled plasma-mass spectrometry. Samples were extracted by 0.02 mol l⁻¹ Tris–HCl buffer solution, pH 7.5. The extraction efficiency lay in the region 60–90 and 60–80% for Cu and Zn, respectively. Quantification of elements in the individual chromatographic fractions was carried out by isotope dilution (ID) and external calibration (EC) techniques. For ID analysis the chromatographic effluent was mixed with the flow of ⁶⁵Cu and ⁶⁸Zn isotope enriched solution and the isotope ratio values ⁶³Cu/⁶⁵Cu and (⁶⁴Zn+⁶⁶Zn)/⁶⁸Zn were measured. In the case of EC technique calibration solutions of elements were injected to the flow of mobile phase by the second injector. Prior entering detector the effluent was mixed with the flow of internal standard solution (In, 50 μg l⁻¹). Both methods have similar precision, however the behaviour of both studied elements was not the same. The chromatographic analysis itself was the main source of variability in the case of Cu. For Zn species analysis, the extraction process and the manipulation with the extract, played the significant role too. It was probably caused by lower stability of the present zinc chelates. The total amounts of Zn found in all chromatographic fractions represented 85–95% of Zn in sampled extract whereas those of Cu approached 100%. In case of small peaks the results of ID and EC were not the same. The EC results were lower then ID results. The great deal of results uncertainty accounts for the precision.     

Capillary electrophoretic studies of acid-base properties of sanguinarine and chelerythrine alkaloids

Capillary zone electrophoresis with UV detection was used for determination of dissociation constants of alkaloids sanguinarine and chelerythrine. Despite the limited solubility of the uncharged forms of the alkaloids resulting in insufficient analytical signal at higher pH the reliable dissociation constants were obtained when acidified samples containing low amount of the alkaloid were injected into the capillary. The precipitation of the alkaloid in the capillary induced by injecting sample of low pH into the background electrolyte of higher pH does not affect the mobility of the alkaloid if its concentration injected exceeds the solubility only to a small extent. Dissociation constants (pK(R+)) of sanguinarine and chelerythrine calculated to 8.3 +/- 0.1 and 9.2 +/- 0.1, respectively, are relevant to Good buffers of ionic strength of 30 mM.     

Stationary-phase effects in gradient high-performance liquid chromatography

The type of the stationary phase for reversed-phase liquid chromatography significantly affects the sample polarity range that can be covered using gradients of organic solvents in water. The polarity range available for gradient separations of samples containing compounds differing in the lipophilic parts of the molecules can be characterized by "gradient lipophilic capacity", Pl, based on the retention of standard compounds with a repeat lipophilic structural unit, such as a methylene group. The gradient lipophilic capacity is also suitable to characterize the separation possibilities of the columns in non-aqueous reversed-phase gradient elution of strongly non-polar compounds, such as triacylglycerols. In the same way, the suitability of various columns for reversed-phase gradient separations of oligomers can be characterized by "gradient oligomer capacity", as demonstrated in the example of oligo(ethylene glycols). To enable a comparison of the properties of stationary phases independent of column efficiency and dimensions, the gradient lipophilic capacity or the gradient oligomer capacity should be normalized for a "standard" column plate number, gradient range and volume (in column hold-up volume units). The gradient lipophilic capacity or the gradient oligomer capacity and the number of compounds that can be resolved during a gradient run decrease as the initial concentration of the strong solvent in the mobile phase increases and (or) the gradient time decreases. These quantities can be used to select a suitable column and to adjust the optimum gradient profile (the initial composition of the mobile phase and the gradient steepness) with respect to the time of analysis and the number of oligomers or other compounds with regular repeat structural groups that can be resolved during the gradient run.     

A modified HPLC method for the determination of aspartic acid racemization in collagen from human dentin and its comparison with GC

The D/L ratio of aspartic acid enantiomers in proteins of low turnover is generally accepted as a reliable procedure for age determination. In our study, twelve samples of eyetooth dentin were analyzed for age determination. The pure insoluble collagen isolated from eyetooth dentin was obtained by an EDTA demineralization process. Free amino acids obtained after collagen hydrolysis were converted into o-phthaldialdehyde-N-acetyl-L-cysteine (OPA-NAC) derivatives for HPLC analysis under modified conditions and into trifluoroacetic acid isopropyl esters for GC analysis, respectively. The modified HPLC procedure used phosphate buffer and acidified sample matrix prior to injection which resulted in suppression of peak tailing of both diastereomers, thus allowing achievement of both good selectivity and good resolution. To ensure the high accuracy of the developed method the other parameters, i.e. specificity, precision, linearity, LOD, and LOQ, were also determined. Nine collagen samples covering the age range of 18 to 84 years were used for the determination of coefficient of racemization (KR) and calculation of parameters for age estimation. The regression equations for the data set analyzed were as follows: KR= 0.0005 x age + 0.0262 (R2 = 0.9639) for HPLC, and KR= 0.0006 x age + 0.0319 (R2 = 0.9374) for GC, respectively.     

A surface fit approach with a disposable optical tongue for alkaline ion analysis

A disposable optical tongue for the alkaline ions Na(I) and K(I) is described. The two-sensor layout prepared on a transparent support consists of non-specific polymeric membranes working by ionophore-chromoionophore chemistry. The non-specific behavior of the membranes was controlled by means of the crown ether-type ionophore present. The imaging of the tongue, after reaction for 3 min with the unknown solution, by means of a conventional flatbed scanner working by transmission mode, makes it possible to calculate the H (hue) value of the hue, saturation, value (HSV) color space used as a robust and precise analytical parameter. The modelling of the response of the two-sensor tongue as a sigmoidal surface is used to characterize the behavior of the tongue and as a basis to infer the concentration values. To compute the concentration of two analytes from the two hue values obtained using the optical tongue, a surface fit approach was used. The tongue works over a wide dynamic range (1.0×10(-4)-0.1 M both in Na(I) and K(I)). The sensing membranes show good intramembrane (1.4% RSD) and intermembrane precision (0.71% RSD) and lifetime (around 45 days in darkness). The procedure was used to analyze Na(I) and K(I) in different types of natural waters (tap and mineral), validating the results against a reference procedure.     

Determining the absolute configuration of two marine compounds using vibrational chiroptical spectroscopy

Chiroptical techniques are increasingly employed for assigning the absolute configuration of chiral molecules through comparison of experimental spectra with theoretical predictions. For assignment of natural products, electronic chiroptical spectroscopies such as electronic circular dichroism (ECD) are routinely applied. However, the sensitivity of electronic spectral parameters to experimental conditions and the theoretical methods employed can lead to incorrect assignments. Vibrational chiroptical methods (vibrational circular dichroism, VCD, and Raman optical activity, ROA) provide more reliable assignments, although they, in particular ROA, have been little explored for assignments of natural products. In this study, the ECD, VCD, and ROA chiroptical spectroscopies are evaluated for the assignment of the absolute configuration of a highly flexible natural compound with two stereocenters and an asymmetrically substituted double bond, the marine antibiotic Synoxazolidinone A (SynOxA), recently isolated from the sub-Arctic ascidian Synoicum pulmonaria. Conformationally averaged nuclear magnetic resonance (NMR), ECD, Raman, ROA, infrared (IR) and VCD spectral parameters are computed for the eight possible stereoisomers of SynOxA and compared to experimental results. In contrast to previously reported results, the stereochemical assignment of SynOxA based on ECD spectral bands is found to be unreliable. On the other hand, ROA spectra allow for a reliable determination of the configuration at the double bond and the ring stereocenter. However, ROA is not able to resolve the chlorine-substituted stereogenic center on the guanidinium side chain of SynOxA. Application of the third chiroptical method, VCD, indicates unique spectral features for all eight SynOxA isomers in the theoretical spectra. Although the experimental VCD is weak and restricted by the limited amount of sample, it allows for a tentative assignment of the elusive chlorine-substituted stereocenter. VCD chiroptical analysis of a SynOxA derivative with three stereocenters, SynOxC, results in the same absolute configuration as for SynOxA. Despite the experimental challenges, the results convincingly prove that the assignment of absolute configuration based on vibrational chiroptical methods is more reliable than for ECD.     

Preparation and characterization of persistent maltose-conjugated triphenylmethyl radicals

The condensation reaction of D-maltose to free radicals of the series of tris(2,4,6-trichlorophenyl)methyl (TTM) and tris(perchlorophenyl)methyl (PTM) has been described for the first time. The new persistent radicals 1 and 2 are very stable and have been characterized by EPR. Their cyclic voltammograms show a quasi-reversible process in the cathode, being reduced to the corresponding anions, with redox potentials a little lower than those of TTM and PTM, respectively. Their oxidant activity is in close relation with their reduction potentials. Therefore, while 2 is reduced by ascorbic acid, 1 remains unaltered.     

Adiabatic triplet state tautomerization of p-hydroxyacetophenone in aqueous solution

The primary photophysical processes of p-hydroxyacetophenone (HA) and the ensuing proton transfer reactions in aqueous solution were investigated by picosecond pump-probe spectroscopy and nanosecond laser flash photolysis. Previous studies have led to mutually inconsistent conclusions. The combined data allow us to rationalize the excited-state proton transfer processes of HA in terms of a comprehensive, well-established reaction scheme. Following fast and quantitative ISC to the triplet state, (3)HA*, adiabatic proton transfer through solvent water simultaneously forms both the anion, (3)A(-)*, and the quinoid triplet enol tautomer, (3)Q*. The latter subsequently equilibrates with its anion (3)A(-)*. Ionization and tautomerization are likely to compete with the desired release reactions of p-hydroxyphenacyl photoremovable protecting groups.