耦合微盘及带输出波导的单微盘腔的耦合模式特性

光学微腔具有很高的品质因子和很小的模式体积,在光电子器件研究方面具有重要的应用价值.运用时域有限差分(FDTD)法和Padé近似频谱分析法模拟研究了耦合微盘及带输出波导的单微盘微腔由于空间对称性破坏导致的模式耦合现象;特别计算了耦合模式的场分布和品质因子,并由场分布得出不同角量子数模式的能量比例.对耦合微盘,模式耦合引...     

用于光纤法布里-珀罗传感器腔长互相关解调的光楔的数学模型研究

光楔是实现光纤法布里-珀罗(F-P)传感器互相关解调的重要光学元件.根据互相关解调的原理分析了造成光楔和光纤F-P传感器F-P腔的反射光相位不同的因素,进而建立了光楔的干涉光强的数学模型,在此基础上对具有不同反射率的光楔的干涉光强进行了数值仿真,和相同反射率的光纤F-P传感器F-P腔的干涉光强对比之后建立了光楔的简化数...     

两种钌配合物皮秒发光动力学过程研究

采用稳态发光光谱、瞬态发光动力学测量等手段,对两种钉配合物[Ru(bpy)3](ClO4)2和[Ru(bpy)2 HPIP](ClO4)2的发光性质进行了研究.稳态发光光谱表明[Ru(bpy)2 HPIP](ClO4)2发光明显偏弱;皮秒瞬态发光动力学测量显示[Ru(bpy)2 HPIP](ClO4)2的激发态弛豫过程...     

一种基于结构性改变的光子晶体光纤光栅理论研究

对一种新型基于结构性改变的光子晶体光纤光栅原理进行了研究.采用多极法分析了结构性改变对折射率的影响,得到有效折射率与包层气孔塌缩之间的关系,建立了结构性改变光子晶体光纤光栅模型.利用耦合模理论对所成光栅性能进行了分析,重点研究了包层空气孔层数、空气孔占空比、气孔塌缩程度对光栅谐振波长、带宽的影响.研究结果表明,光子晶体...     

黎开管热声振荡的主动控制研究

本文以黎开管内的热声耦合振荡为研究对象,设计基于主动补偿的适应性控制器抑制黎开管内的不稳定燃烧。试验以扬声器为执行机构来改变黎开管的边界条件,从而抑制黎开管内的热声耦合振荡。实时控制效果表明,本文所采用的适应性控制算法能够有效抑制因热声耦合产生的燃烧振荡,为实际动力系统燃烧振荡抑制提供了思路。     

基于三种气化炉的整体煤气化湿化燃气轮机循环热力性能分析

将燃料湿化和空气湿化应用到整体煤气化燃气轮机循环中,以降低NOx排放并有效利用系统低品位热。基于水煤浆、干煤粉及输运床三种气化炉,构建了多种整体煤气化湿化燃气轮机循环,分析了其热力性能并给出了湿化方式建议。研究表明：燃料湿化循环系统效率较高;空气湿化循环燃气轮机比功较大;整体煤气化湿化燃气轮机循环具有利用系统外部中低品...     

质子交换LiNbO3波导调制器多模截止波长的测试技术研究

提出并实验了一种采用倒置输入的结构来测定Y分支LiNbO3波导相位调制器的多模截止波长的新方法,模式耦合分析表明,倒置输入的Y分支波导的多模传输的输出功率具有随波长变动发生振荡的特征,该特征可用于定量判定多模截止波长.方法的有效性得到了波束传播法(BPM)仿真和样品实验两方面的验证.     

Micromegas prototypes with thermo-bond film separators

In this paper we report the results of Micromegas prototypes constructed by attaching micromesh to an anode using thermo-bond films. The excellent metal attaching ability and good dielectical property of this kind of film make it a promising material to be used as avalanche gap spacers. Several prototypes are successfully made. The electron transmission properties are first studied and then the gas gain is measured in argon-isobutane mixtures. The maximum gain of more than 10⁴ is easily obtained. The energy resolutions for ⁵⁵Fe 5.9 keV K_α ray can be better than 20% over one magnitude in gain for different operational gas mixtures and the best energy resolution of 13.7% (FWHM) can be achieved with the gas mixture of 94% argon concentration. The preliminary test results of the prototypes with sensitive area of 45 mm×45 mm without internal support show good uniformity across the sensitive area.     

Determination of the time resolution for neutron scintillation detectors by multi-coincidence measurement

Based on the multi-coincidence measurement, the time resolution of three liquid scintillation detectors (BC501A) were determined strictly by solving the coincidence equations, where the influence from electronics estimated by self coincidence measurement as well as the background had been considered. The result of this work agreed well with the result that was deduced from the traditional method, and it will be helpful to analyze the energy resolution of neutron time of flight spectra measured by using such detectors at CIAE (China Institute of Atomic Energy).