测度链上非线性m-点边值问题的正解

设T是一个测度链(时间标架)并且0,T∈T．讨论测度链上m-点边值问题其中a∈Cld((0,T),[0,∞)),f∈C((0,T)X[0,∞),[0,∞)),β,γ∈[0,∞),ξ∈(0,ρ(T)), ai∈[0,∞)(i=1,．．．,m-2)是一些满足适当条件的定常数．借助于锥上的不动点定理,得到了此问题存在单个及多个正解的一些新的更一般的结果．特别地,我们的结果推广并改进了一些已有的结论．     

Generalized Derivations with Skew Nilpotent Values on Lie Ideals

This article gives characterizations of generalized derivations with skew nilpotent values on noncommutative Lie ideals of a prime ring. The results simultaneously generalize the ones of Herstein, Lee and Carini et al.     

SURFACE MODIFICATION AND DISPERSION OF NANODIAMOND IN CLEAN OIL

The effect of different kinds of surfactants on the size distribution of nanodiamond particles in clean oil was studied.Results show that the dispersing stability of nanodiamond modified with surfactangts YS-1 and SB-18 simulta-neously is much better than those modified with either of them because of synergism of the surfactangts.And the particle size distribution in the system can be improved remarkably after the adoption of hyperdispersants such as SA-E and SA-F.Anchoring groups of those hyperdispersants can be bonded with the particle surface by chemical and/or hydrogen bonding and their soluble chains are well compatible with the dispersion media.As a result,the particles are uniformly distrbuted in the system owing to the steric stabilization.A very stable clean-oil based nanodiamond suspension with an average particle size of around 53.2 nm was prepared.     

板壳塑性屈曲中的佯谬及其研究进展

本文详细论述了板壳塑性屈曲中的佯谬及其研究进展。并对现有的各种观点作了分析讨论。     

一种新颖的光纤应力传感器

基于模体积失配效应与微弯原理，提出了一种新颖的强度型光纤应力传感器，其传输光功率变化与应力之间近似为线性关系，重复性好，无迟滞现象     

构造本构方程的另一种方法——非平衡不可逆热力学方法

重点介绍了以Onsager-Casimir倒易定律为基础,从不可逆热力学观点出发,对远离平衡状态,引进新的变量(被称为动态变量),构造本构方程．并以简单剪切流场为例,求出了测黏函数．     

La_2O_3和WSi_2增强MoSi_2基复合材料的摩擦磨损性能研究

选用MRH-5A型环-块摩擦磨损试验机测定了3种载荷和2种转速条件下La2O3和WSi2增强MoSi2基复合材料在滑动干摩擦时的摩擦磨损性能,采用扫描电子显微镜分析了复合材料磨损表面形貌.结果表明:La2O3和WSi2增强MoSi2基复合材料的抗磨性能优于MoSi2及WSi2/MoSi2材料;当载荷与速度乘积(pv)值小于183.04N·m/s时,La2O3和WSi2增强MoSi2基复合材料的磨损质量损失仅为相同条件下MoSi2的1/4～1/6和WSi2/MoSi2的1/2;这是由于La2O3和WSi2复合增强相存在硬化和韧化协同作用所致;随着pv值增加,La2O3和WSi2增强MoSi2基复合材料依次呈现犁削、粘着磨损和疲劳磨损特征.     

反射焦散线实验中斜入射光对应力强度因子测试精度的影响

本文用空间解析几何方法,推导了在一般非平行斜入射光条件下,裂纹体表面所形成的反射焦散线和初始曲线的方程.分析了倾斜入射光造成的焦散线畸变,给出了这种畸变造成的裂端应力强度因子测量误差的解析表达式.     

A critical evaluation of numerical solutions to the ‘Benchmark’ surface-flaw problem

Recent precise, elastic numerical solutions to a surface flaw in a plate under remote tension and bending have been compared to arrive at a ‘best estimate’ of the stress-intensity-factor variation along the flaw border. The geometry of the semielliptical surface flaw examined had a depth to length ratio of 0.25 (a/2c=0.25) and 25- and 75-percent relative crack depths (a/t=0.25, 0.75). The analysis methods used to determine the solutions included: Schwarz alternating technique, finite-element method and boundary-integral-equation method. The derived best-estimate curve for the stress-intensity factor is believed within 3 percent of the actual value along the crack front. The best-estimate curve compared well with scarce experimental data (±10 percent). The difference between the best-estimate curve and experiment is thought largely due to differences in geometry and Poisson's ratio.